Eurovox Max problem

make sure you enter the correct symbol rate for your area before scanning!

 

nice one it works now mate. also i have tried to update my firmware i downloaded it but does my box need to be pluged into my computer and my tele at the same time can you please help

 

To upload the firmware you need your box a null cable modem and your pc. You dont need the tv or the cable plugged in just the box and electrical lead and your pc and the correct software. Then once youve downloaded the software plug box back to tv and cable and take it from there. There are instructions on here as to exactly what to do, sorry cant remember off the top of my head as i did mine a few weeks ago
hoep this helps

 

thanks alot i shall tryit

 

caz follow the link below to flashing the eurovox and goodluck

http://forums.afterdawn.com/thread_view.cfm/653745

 

Location is Dublin city North. Prov is N*L.

I have successfully upgraded several boxes:- Eurovox , THEBOX ,Replay and Digibox before.

I have a strange fault on a Eurovox that previously I updated with RED BOX firmware and which worked for over a

week up to now.

"NO SIGNAL" flashes on screen.

The Green LED "LOCK" on the display also flashes at the same rate.
-------------------------------------------------------------------

I have done the following tonight to reset everything:-

Downloaded Eurovox RED firmware 21-04-08.

Clear data: channels and set factory defaults.

select 6.887 sample rate

OK to start scanning.

Enter frequency range from- 290 -to 405.

OK to begin and wait for the scan to finish.

As each frequency set is scanned you USUALLY see each new channel being added to the list by name but in this

fault condition the system finds only a small number of channels and they are named TVCh1 ...TVCh2 etc.

When exit to TV screen - No picture!

"NO SIGNAL" flashes on screen.

The Green LED "LOCK" on the BOX display also flashes at the same rate.

My other BLUE BOX works perfectly if substituted for this RED one so I don't have any cable problem etc.

Has anyone any clues on this problem??

Thanks for any suggestions.

 

Have a look here,

http://forums.afterdawn.com/thread_view.cfm/653745

All the info is in there, Read SG8 post on how to flash your box and cables needed.

 

make sure you enter the correct symbol rate for your area before scanning!

 

and again

Why are people repeating the posts over and over,! This has already been answered and the problems sorted! Your just filling the thread up with pointless repeated posts....... Rant over.

 

If your sure its not your signal, it sounds like a tuner problem.
I read on a previous post from oggnogg about something similar.(Can't remember where exactly)Maybe you could PM him and ask him for help.

 

no signal problem i get i just switch the box off at the mains and back on again and it picks up the picture again

 

hiya i have a simple problem with my channels on the box, can someone please tell me how i can set my channels to default. the channels r in a messed up order, is there any way i can arrange them in order they were before without having to do them 1 at a time

 

nope

 

If you get a CDF file for your provider/area from someone who has already sorted theirs it may be of some help to you.

 

i when i downloaded euro vox red it would only let me upload it when i went to download it said this something like this firmware is not suitable for this box and doesnt do anything any answeres please

 

It means what it say's, are you sure that you have a red box, because that is telling you that you don't, and you are trying to put the incorrect firmware on.

 

@ farhic7

As quoted by scouser on 'Eurovox max security'Thread http://forums.afterdawn.com/thread_view.cfm/141/468229

''Eurovox Max Kuro Release
UFL_Max_Kuro_28_04_08_T.exe

This file is an alternative image for people who may have the 8% signal problem.

It can be used by anyone but it is recommended to generally use the previous images that contain the Signal Boost option.

An option has also been added to turn AutoSort ON/Off in the Powerscan menu.

File Here http://www.mediafire.com/?hsmji5wjpas

Many thanks to the Kuro developers.


I have also put it in Eamos FTA Library. ''

Hope this helps you out.

 

Can anyone help please? - EuroVox MaxV 2008 (Black)
I am using the following guide (http://forums.afterdawn.com/thread_view.cfm/653745) to update my EuroVox MaxV using the 10/04/2008 update programs. However when I come to option 2a (copying the CDF file) The screen simply refreshes and doesn't actually transfer the file to the desktop. There is a message on the TV screen which reads - "Insufficient Memory". Can anyone tell what is wrong and how do I fix this please?