Eurovox Max problem

LOL

 

Hi guys anybody tell me where to look to explain about the jargon you use cdf tp eko jtag it would help when i listen to you chat thanks for everything

 

Well tp == transponder that pick up the channels on

cdf === channel data file for eurovox

eko == the holding site for the firmware etc

jtag == clone box dead due to wrong firmware been put on it so you need to bring it back to life using a jtag and some software

 

Thanks cybercop any further info appreciated buddy

 

No bother mate always happy to help

 

Got my mates eurovox from him to try and fix,his box wont switch on,there are two vertical green lights immediately above the word satellite that are on when i plug it in.The buttons don't work and the remote wont allow me to switch it on either.anyone got any ideas?

 

Some sites sell them now with no software on it, flash the box like normal and you'll come to a screen on your pc/laptop saying system reset. Unplug the power from the eurovox and plug it back in, upload software like normal. Had this problem last week.

 

flashing eurovox box

1 connect your null modem cable

2 get your loader ready

3 the loader and firmware are combined

4 turn your box off at the mains

5 press the center download button you will get another box press start ( waiting for receiver )

6 now turn your box back on and you will see the loader loading the firmware

7 wait till you see that your box has rebooted before removing any cables

8 now you have flashed your box

 

CyborCop

would be a good idea to read through this http://forums.afterdawn.com/thread_view.cfm/2487, Read section 9.

Just to let you know, No offence ment.

 

Thanks for all the help.i'm using the cable that came with my starview but the firmware doesn't find the eurovox?
Is this the wrong cable?

 

None taken mate it is sorted now ta

 

no should be the same cable just follow what i put up and you wont go wrong make sure you have your right com port selected

 

what firmware are you trying to flash the eurovox with?

 

ufl_max_blue_21_04_08

DnUpMan

 

that is for a 2006 box is that what you have

the loader and firmware are combined

also make sure it is not a clone box look thru the vents for any red paint on screws

 

Yes its a 2006 box

 

now be sure you have a blue, blue =12 notches from the tuner(rf in) red=8 notches check and see you do not have a clone in here http://www.freewebs.com/dooby2oon/

 

Yes i checked and its a genuine

 

flashing eurovox box

1 connect your null modem cable

2 get your loader ready

3 the loader and firmware are combined

4 turn your box off at the mains

5 press the center download button you will get another box press start ( waiting for receiver )

6 now turn your box back on and you will see the loader loading the firmware

7 wait till you see that your box has rebooted before removing any cables

8 now you have flashed your box

 

ok if its blue and genuine try this http://www.4shared.com/account/file/44970963/7452e8f7/UFL_Max_BLUE_21_04_08.html