Eurovox Max problem

big thanks celtic but i only i have 13 the 379.500 is not working thanks again

 

well if you have 138 channels then you have them all so happy viewing

 

can we get the freg for swords.

 

the frequencies are the same for all n@l Ireland

 

hello everyone,

can anyone tell me how to set the correct time on a eur#v#x 2008.
would be grateful for any help,tks

 

Try this courtesy of sc0ucer and pplease note use the search at the top of the page and you will find anything you want in here 1. Unplug EV then plug it back in.
2. Turn on and immediately press menu.
3. Go to config, then time settings.
4. Set correct time using GMT setting.
5. Turn GMT off.
7. Press blue button to save and exit.

Note if you unplug EV again you will have to do above again, so leave in standby at night

 

tks, i did do a search and got those instructions,but they did not work as the programs are still one hour behind.sorry,just thought there might be another way around it

 

you have to keep trying it will work eventually just keep unplugging the box by the way are you in Ireland as it is only an Irish problem

 

oh ok and yes, tks once again

 

and remember if you unplug it you will have to start all over again as it wont remember the time settings so just put on standby only

 

Hi, I would firstly like to thank all for their help and knowledge they have shared.

I, like most here, have found that some freq have changed over the last few days and I would like to know how to get a few certain channels back. I have used all the new freq provided and I am happy to report I now have MTV2 again along with the others that are on 419.000 freq as I haven't had them from about 2 weeks after getting my box even after updating firmware and numerous powerscans. I have the eurovox 2008, on NTL and I would like to know if anyone else is having trouble getting Kerrang and the other channels on the 394.250 freq back???

I have tried the freq provided plus manually searching for it using different freq but nothing so far, so if anyone has any other idea please let me know and thanks in advance for any help offered. Keep up the good work

 

You will have to delete ALL the stations that have been moved around and then do the manual scan to get them back

Either that or do a factory default and a fresh scan and you will also get ALL stations back that way

New FREQ change on N*L IRELAND : http://forums.afterdawn.com/thread_view.cfm/667986

 

Thanks for the quick reply Celtic, I tried that and got the same channels back but still no 394.250 freq channels, strange. I grabbed the CDF from eamos library and threw that on and the freq is there and the channels are there but no signal. I will hang on and enjoy what I have and keep the empty channels there in case they happen to show up. Again, thanks for the reply.

 

Craig the box you have is a ultra eurovox which is a clone box and i will doubt if you will get firmware for that box but could be wrong[/quote]

Just want to say thanks to Johnfb and Fergusrb - I must have been utalising the wrong information in trying to change my box - I now sucessful have all services back up and running.
Thanks again
Still non the wiser about the box - too techno for me!
Craig

 

hi nerb not a clue if it makes a difference but i checked i have kerrang on freq 395.000 yours is 394.250 just a tought?

 

I am finding that a mixture of the codes given by Celtic and Tempo have worked for me, for anyone who's interested and on NTHell Dub they are: 291.000, 299.000, 307.000, 315.000, 323.000, 339.000, 347.000, 355.500, 363.500, 371.000, 394.250, 403.000, 418.250.
All stations found using those!

 

Sorry, i obviously have codes on the brain - I mean frequencies!

 

hi can anyone help have red firmware in 21-04-08 in, working last night turned tv on today searching for codes

 

check in your system information that you have got the correct firmware also that you have a channel selected that is broadcasting now

 

was running that firmware for a few weeks just weny today