Eurovox Max problem

I know it gets frustrating but we will try help you solve the issue

Ok try this , delete the cdf from your PC and download it fresh to your desktop again from Eamo's

What software are you using to transfer the CDF to the EV ?

 

ok done that and im using unified flash loader v1.0

 

Ok go here and download the DnUpMan v4.2 to your desktop

http://www.4shared.com/account/file/25134276/e7df7311/DnUpMan_DVBC_FAV8_20060314.html

Before you download the fresh CDF to the EV

Press Menu, Config, Clear Data and then clear ch@nnel data on 6887

Turn off box and connect back to the PC

Put it on Standby (12:00)

Open/Run the DnUpMan software and browse for the fresh Channel Data CDF file and click Download .

When complete , connect back to the TV and see how you get on with doing it that way

 

ok done that and got the same response " service unknown "

i reckon it has to be a dodgy box what you think ?

 

It has me stumped too sorry

Its deffo a Eurov0x Max v 2008 ?

Press Menu > Config > System Info and tell me what it says

 

whats the difference between 2006,2007 and 2008 i thought there were only blach blue and max v out there ?

 

How to indentify which version of eurovox you have
The latest eurovox max v 2008 has an all black front and will say Eurov0x Max V on the front
The previous version is called the eurovox RED because it came in a red carton
The first version was the eurovox BLUE as it came in a blue carton

NOTE the blue & red version look the same & both have a silver plate on the front, to tell them apart check the following

Look down at the b0x from above and note where the rf in connection is, looking through the grill on the box above this is the silver tuner, a 2007 model will only measure 8 slots of the grill and a 2006 will measure 11.


11 = BLUE = 2006
8 = RED = 2007

 

thats what i thought alright its definitely the max v 2008 i have here but its about to go out the window lol

 

Have you tried the Eurov0x Kuro 3 28/04/08 firmware ?

 

i had similar prob, put on old firmware if it works then flash with new one

 

eurovox blue after updating 24.4 08 firmware box is scanning and half
way through scann the box cuts out the screen on the box shows p.e.a.a has anyone got a solution apart from the bin thanks

 

PEAA is a protection error message are you sue its a genuine box and not a clone?

 

i have checked the grill and it
has 11 slots to the rf i have updated this firmware previously and
the box worked perfectley for 2 months ilost some stations and red
scanned and yellow scanned it said no transponder crios

 

Checking the length of the tuner is only to tell if its a red or blue box. Not if it a clone or genuine box, have a look here http://www.4shared.com/file/2513469...ox_blue_Box_Pics.html?dirPwdVerified=de76126b

BTW think you mean you used the 21/04/08 firmware as opposed to 24/04/08.

 

i have downloaded firmware as suggested and scanning now

 

Getting the same problem 'service unknown'. Did a power scan last night and TP went from 37 to 41. Said code updating then nothing, no BBC or anything ?

 

help.i have just purchased a eurovox max v 08 box but can only get the free channels on all other channels are asking for a smart card to be inserted.how can i get round this do i need a smart card or is there another way of gettin round this. with v##gin livin in merseyside area. total novice on this so keep it as simple as pos.

 

scan no joy pulled 12 channels on 6687 sr and cut out showing p.e.a.a

 

And did you read the link I gave you?

 

idid to be sure to be sure