Eurovox Max problem

And are you sure its a genuine blue box?

 

yes its geniune thanks for your help scouser i have been at this box for hours now i think its time to surrender thanks again.

crios

 

Yep better taking a step back sometimes for a while Next time open the box you will see a small reset micro switch on the main board. Press this and then try the firmware again.

 

very good i will try this later on bye for now i will let you know if it sorts it out

crios

 

have opened box and reset downloaded firmware with no joy only scanned to 440 m.h.g and cut out


crios

 

any ideas for e/box still has me discombulated
crios

 

please can you help me ive got same problem as everyone else at moment (updating codes) im trying to update my eurovox max V, I bought a new lead but just keep getting (waiting for reciever to response) message,please can you help its ding my head in !

 

Next thing to try would be the clonesafe firmware. After that its Jtag Im afraid.

 

Usually means the com port settings are wrong. Unplug and replug after hitting download. If it doesnt work drop back.

 

sorry mate not sure what you mean , im no expert can you explain in very basic terms, and please bare with me!

 

Set the Comm port for your adapter http://forums.afterdawn.com/thread_view.cfm/663923#4033225

Then follow SG8's guide http://forums.afterdawn.com/thread_view.cfm/653745

 

hi guys,

does anyone have the codes for c**rus in mullingar,

thnaks people

 

Hi Guys,

I recently purchased the null cable from ebay
http://cgi.ebay.co.uk/DB9-Female-DB...ameZWD10VQQcmdZViewItemQQ_trksidZp1638Q2em127

but it does not detect the box when i tried to update the fireware. I have checked in device manager and the com port1 is listed on one of the list. Please can someone advise.

Thanks

 

Read the yellow banner at the top of the page!!

 

just to say cheers to celtic71, scouser and hitack i eventually got the box up and running for some reason it worked when i plugged it in my neighbours tv dunno what the problem was just kept saying no signal on mine but yet all the others were fine

any way thanks for your help once again !!!!

 

needing some help with my euro vox max box. i',m on t w in glasgow.

i've lost loads of channels i used to have over 300 now i just have 180, i've got all the sports channels except arsenal tv and liverpool tv, most of the moves but i cannot seem to scan in things like bbc three etc

any help getting these channels back would be appreciated.

 

dont see a channel dump for your aea around,but if you want to do a factory reset then rescan it may get all your channels back,go to menu config clear data erase all channels when thats done power scan from 100mhz to 800 mhz on symbol rate 6.952

 

Hi I need help identifying a burnt resistor in the PSU of a eurovox max V R23 the cap c41 is also swollen but I can Id that.

thanks in advance

 

No problem , glad you got it sorted , did you use the 28/04 firmware ?