Eurovox max security

N.L fitted me with a new internal connection box and it worked a treat.The tech said they are upgrading the northside at the mo so the signal should get better in time when they eventually get round to your area.

 

Hi All

I have a Euro Vox Max 2008 and want to tune in FX channel. I'm in Dublin and have Ntl. Can anyone tell me the frequency?
Thanks!

 

You can find the list of N*L channels and freq here
( Thanks to Scouser )

http://forums.afterdawn.com/thread_view.cfm/540478

 

hi lads, I 've just moved in Kilcock and tried eurovox 2007 and 'the box' on c****s digital subscription I recently got. I canot get any of of these boxes work. I have used 6875 and freq i got from the pace c****s box (instalation menu) and still nothing. These boxes were working great in Dublin on n*l 6887...any advice? my head is melting because of this...
cheers

 

Hi guys, has anyone been able to get the eurovox work in Greystones, its ch**us, i have put the frq's in manually, but still no joy. Any ideas would be greatly appreciated.

 

Are you on True cable or MMDS. True cable is a direct feed into your house, MMDS is a cable feed from a dish on your roof.

It will not work on C***** MMDS.

 

On true cable. Not MMDS. When I do a power scan, i get a lot of green in the corner like it is getting signal, but then it doesnt download any transponders

 

OK try this as I see you have also input the ferquencies to no avail.
First you do a factory reset on the box. Then do a full power scan (In Full Mode not Normal). Then you have to highlight Language Settings & press OK. Enter 1968 twice & use the right arrow to select Nagravision. You need to scroll down to No Name down the bottom and change the data.

Ch****

KEY 00 = 4B 7C D5 86 E7 01 CC 96

KEY 01 = 8E 8E 46 FD 36 28 A3 F0

I have seen this work in some areas.

 

thanks, i'll give it a go.

 

Sorry forgot to add this. C***** frequencies set symbol rate 6875.

 

do you flash eurovox the same way as sv boxes thanks

 

Yes , more or less, obviously you use different software and firmware for Eurovox

 

hi i get 117channels in west of ireland
is it possible to get more channels by changing the frequency?
it says the box can store 3500channels surly there is a way
so is it possible? and can it work in australia as i have friends who want the box

 

hi clocker

sounds like you are missing two of the lower freg 291,299 these settingg are only for nthell,you need to just add the 291/299 and do a manual scan ,below should help



user installation menu go to ch edit, select add and enter freq details all have the same symbol rate 6.887Mbaud
The 13 freq's are 291,299,307,315,323,340,348,356,364,372,380,388,395

Save them all and hopefully you should be good to go.

 

Hi I've got a euro-vox max 2007 and in Donegal with a cho*** line. I have tried 290 400mhz with both symbol rates 6887 6952 and 6875 but I am not getting any channel numbers. When doing a scan the quality and signal is sometimes 98%. Can anyone let me know if the euro-vox max 2007 work in Donegal and if so how can I get it working. i have downloaded and installed the updated firmware. I don't know whether I have digital or not, except it is a direct feed. I have the advice above re chrism23 and I'll give that a go.

Thanks

 

Hi Guys Kotil here

I have had eurovox 2007 for months now, going great until the other day, when i added a new channel and deleted it in the Channel add/modify section in insulations.

I am using the NTL dublin codes 291 to 395 (13 in total) and symbol rate 6887.. have been using that for a while, all was well until now when i do a power scan normal, i am picking up the 13 TP's but then the next step say 1/104 ...2/104 and so on does not pick up any channels or music stations. Can anyone advice me what to do next. My cables are fine too. Its a noggin scratcher, im doing everything i have done before but stil lno joy.

Cheers for any advice guys. ;0)

 

Have you tried just an autoscan?

 

What value are you getting for the quality of your signal from the TPs? (you can find it in user installation.) Is it above 80%, stable?

 

cheers 2steven0
ive now got 175channels compared with 117,
now ive only 20-25 to fix the frequency for,
when i go into channel edit ive 25 basic chanels, ive got all 20 gettin bout 83%,
if i fix the other 5 surly il get even more,
any ideas on the frequencies for that guys?

 

Hi

I tried scOuser's advice above for ch**** frequencies but there was no Nagravision option.