Eurovox max security

Folks,

I have a Eurovox Max and tried to update my channels to try and get Bravo+ and Living+ back last night but obviously did something wrong and have lost the signal for all the channels now !! Can anyone provide a fool proof way (step by step guide) of getting them back. I am with N*L any help would be really appreciated.

 

Rather than going through the whole process of clearing all your data and doing a power scan and then sorting all your channels again, just download an updated channel dump file to your box. You will find an updated CDF for Dublin called dub080907a.cdf in this link http://www.4shared.com/dir/3339467/5efeed13/sharing.html courtesy of Steo. Use voxer or dnupman with a null modem cable to download the new channel dump to your box.

 

i really dont understand that at all do i have to plug my box into my laptop?

 

Yes you do to download the firmware to the box, (put the box in standby).

Your laptop may not have a DB9 interface as most new ones dont.And so you will have to use a usb adapter in conjunction with the null modem cable.

Do not mix a USB to Serial adapter when its USB to Serial Port adapter that is required. You then have the required Port to connect the Null Modem Cable to.


Null modem info here

http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6

USB Adapter info here

http://www.maplin.co.uk/Module.aspx...t10&doy=search&MenuName=USB to Serial Adaptor

These links are only for reference as both items can be purchased cheaper of fleabay.

 

Hi

I am having troubles to get a eurovox max red 2007 to work with choxxs.
I have downloaded the may firmware, reset to factory settings, scan at 6875, added chorus frequency manually and auto scan no joy.Power scan no joy. I have choxxs cable.The quality signal is around5.I had another eurovox ( it just died ) and it was working fine.
Any ideas?

 

Sorry did you say the signal quality is only 5?

 

Yes it is. ( it goes from 2% to 5%)
If I do a power scan, the signal is 90% and quality from 2 to 5.If I unplug the cable it is still signal 90%.

 

You are sure you have a live true cable feed. Please also connect the Eurovox directly into the incoming feed when updating the frequencies, take away any splitters.

Ch**** Frequencies

363.000 works 371.000 works
355.500 works 347.000 works
339.500 works 386.000 works
347.500 works 394.000 works
419.000 works 410.000 works
322.000 works 347.500 works
314.000 426.000


To add these frequencies you need to
1.Go to installation
2.Press green button for ch edit
3.Press red button add channel
4.Enter frequency and symbol rate 6875
5.Press ok, then repeat these steps till all freqs added. When they're all in press exit and go back to first page of install menu. Press the red button for auto scan. This will do a scan an all the frequencies entered and should hopefully give you 138 TV channels and the rest are radio.

 

thanks sc0user.
I got to the bottom of it.The problem was the firmware.I send for replacement a red box, so I was updating the replacement ( didnt come in a colored box ) with the red firmware.Just tried the blue firmware and quality boosted to 82%.

 

No problem at least you got sorted

 

Can anyone point me in the right direction for a Eurovox tutorial?? Was sure I came across one somewhere, but now that I need it I cannot find it.


Have a Eurovox MAX 2008, on NTL Dublin, and I have downloaded and installed the 'critcal update' but don't know what to do next.

All help greatly appreciated.

Thanks

 

Downloaded the one from Eamo's library, so will start from there!

Thanks

Will be back with my problems later no doubt!!

 

Hi Forum

can anyone help - I bought the 2008 Eurovox MAX and live in Swords and have CH***S cable. I have performed a power scan, all the channels are tuned in but i only have 4 of them unscrambled. I get a message of 'System Unknown' on all the other channels.

Do i need nagravision codes - can anyone explain where i can get these and how i input them?

thanks in advance

 

How many channels have you found?

 

The only channels i have are the Irish ones - RTE1, RTE2, TV3 and TnaG

 

when you did a powerscan, did u use the symbolrate 6875?

 

You did follow this quote I have above on this page. When I say how many channels have you got I meant for both scrambled and FTA channels. I can tell you how to input the keys manually for C*****, I presume you have a live true cable feed.

 

Yeah, I used 6875.

 

Anyone know how to unlcok the password on the eurovox?? forgot my password.

 

Try 1004