Eurovox max security

On xp scouser, and yep put the driver in before hand...

 

If you have them sorted already it will not affect the order they are in. If you havent sorted them this will not do that for you as it is a firmware update not a cdf.

 

No worries Scouser , I'm more than likely stepping on your toes





The most common issue when installing the USB adapter and driver is selecting the correct port for your map software to recognize.

You must make sure your particular software is looking on the correct port for it to transfer any data.

To see which port your USB adapter is connected to, connect your USB adapter and follow the following instructions:

1. Go to the Start Menu
2. Right click on "My Computer"
3. Select "Properties"
4. Click on the "Hardware" tab
5. Click on "Device Manager"
6. Click the + sign next to "Ports (COM & LPT)"
7. One of the listed ports should indicate which port your USB adapter is connected to (e.g. COM1, COM2, COM3, etc.)
8. Go back to your map software program that you use to transfer data and make sure it is looking at the correct port.
9. You should be able to transfer data once the correct port is selected

If you need drivers go here

http://www.gilsson.com/usb_drivers_download.htm

 

No probs Celt step away

 

Just trying to look busy lol

 

What i do is load it onto the box and copy the same file back and edit it in the channels and save so if i want to have another one i just use the same file

 

if i leave the last s/w on ,will it be ok that the one in sept 2.0

 

read back a few pages, updated my own box ,will leave my mates. i updated about ten the last time they can figure out this one on there own

 

Some areas have reported problems scanning for tps after the update. To get aroung this download a channel dump from your EV before flashing, (then clear channel data), then flash the box. After flash has completed upload your original channel file back to the EV and that should be it.

@ Witko its up to yourself if you want to reflash the September one is fine, but the latest one is quite a noticeable difference.

 

Anybody know if there is a plan to release new software for 2007 red box. The new software for the V is excellent

 

scouser updated my own box its great ,what I was asking is i updated boxes for some mates and hoping they would nt need to be done at once, as long as sept sw works thats fine thanks

 

by channel dump i take it you mean using voxer and saving the channels or am i missing the point here ?

 

No you got the point CDF = channel dump file use voxer/dnupman whatever your preference.

 

trying to jtag 2007 box., red one have all the stuff except a 25 pin female connection ,got the jtag set on e bay, whats the connection called and do i use n/m cable with this?

 

No you use the Jtag with the Parallel port on your pc, post the fleabay link to show me if your Jtag is correct one.

 

dont have one using laptop

 

Can you borrow one with a parallel port? As I would not advise using any sort of converter.

 

scouser it was the same link you had a few pages back, everything seems to fit , followed diagrams on disc provided can use my mates comp later

 

OK best of luck with it.

 

Hey fellas, i updated my 2008 box woth the October software. But now i have lost E4 AND E4+1! For some reason i do not know why this has happened, i also have lost ITV 2 & 3. I have tried scanning numerous times to no avail. How can i get these back? They are still owrking on my 2007 box. Any help is greatly appreciated. Thanks