Eurovox max security

What type of scan did you do?

 

[]

I am sure thats a Starview Jtag you need the Eurovox one. Send me a link to the one you have and I will double check it for you.[/quote]
Thanks for getting back to me.New to this not sure how to send you a link.But you are sure there is a difference.I was thinking that it might have been the lead i was using i dont have a printer port on my PC so I using a USB converter but this works when i flash a box.

 

I am in the same position, has no one else found a solution to this, I have wiped he box and reflashed, re scanned, and still nothing!!!!! Please please please someone help!!!

 

What box have you got 2007 ? when you reflashed are you getting to the setup menu or is the box dead ?

 

I have a 2007 box. I have only re-scanned.

 

Try resetting to factory default and rescan again eg reset channel data

 

Did that, still not luck.

 

Same here, reset the whole box, reloaded the firmaware, reloaded the software, rescanned the bos, stil the same wrong time. its a real pain in the ass.

 

Had mine working and now thats gone as well may be a CC problem with N** in Ireland although subbed boxes work fine. I also tried evrything now from auto time settings on/off, adding/subtracting hours, reboot. Even went as far as a factory reset and powerscan. I can get it to work for a while as I thought I had it last night.

Have to put the thinking cap on for this one

 

Thanks for getting back to me.New to this not sure how to send you a link.But you are sure there is a difference.I was thinking that it might have been the lead i was using i dont have a printer port on my PC so I using a USB converter but this works when i flash a box.[/quote]

A convertor will also not work with the jtag kit.

 

Get that thinking cap on quick lol

 

A convertor will also not work with the jtag kit.[/quote]

When you say converter do you mean a USB converter will not work?

 

Yes as you need to use a pc with a para port with bios settings of EPP and an IRQ of 378.

A USB adapter can be used for flashing but not for jtag purposes.

 

Scouser, im waiting on a jtag kit to arrive from Eng any day now, just reading your last comment and im in the same position, working from a lap top using usb converter, is there any way at all around this , ive got to revive 4 of these and im not very computer literate.

 

Hi sc0user cheers for that infomation thats probably why it wont work.would a parallel port extension lead from PC to JTAGING device work?

 

Anybody have any joy on the time issue yet at all????

 

Hi sc0user u helped me before thanks now I need ur help again.
I had to reflash a 2008 max v all went well untill I went to change freq from 388 to 402 and 395 to 394 and rescaned and lost the lot, all freq showing a red band now instead of green signal strength, what am I doing wrong, Dublin N*L

 

Do your boxes have standby light on or off?
I have two boxes, one has a standby light the other has not.
The one that has'nt, clearly has damgage to power board ie. scorched resistors! Contacted dealer and he is sending two new boards.
So before you jtag check inside your boxes for any obvious signs of damage.

 

barm. 2 have stanby on 2 have not. checked inside an no sign of damage

 

OK, I think I might have cracked it, my time is ok, but I want someone else to see if it works for them.

Go into time settings, set the GMT to whatever you have to in order to get the right time, then press save. Then turn GMT off and press save again. Both times above and below GMT should be the same. Exit then, and update the channels.

Will someone please try this and let me know how you get on. The time should be right and the programming should also match the time.

Good luck!!