Eurovox max security

Here you go :

1) WIDESCREEN

Go To MENU / Config / TV Setting

Options Available:

16:9 True Widescreen

4:3 Centre / Letterbox / Full




2) SIGNAL BOOSTER

If you live in a low signal area and have weak signal problems when scanning or picture breaks up when watching.

Go to Menu /Config / Settings / Last option

Default Settings Off

Switch On/ Save & Exit




NAME: KURO_BETA_WS_SB
RELEASE DATE: 24/10/2007
TYPE: BETA
FEATRURES:
1) Full Widescreen Support
2) Signal Booster Option


IMPORTANT INSTALLION INSTRUCTIONS:
If you are flashing Brand New box i.e. with no software currently loaded then flash as normal.

If you are upgrading your box i.e. it already has software on the box please follow this instructions.
After flashing box as normal,
Save Your Channel Data File by Using the Software to Upload Channel Data From Box To Your Desktop PC.
Then Go To
MENU
CONFIG
CLEAR DATA
TYPE IN YOUR PIN
CHOOSE 2ND OPTION (FACTORY DEFAULT)
SELECT YOUR SYMBOL RATE
RESCAN BOX or DOWNLOAD YOUR CHANNEL DATA FILE FOR DESKTOP PC

YOU MUST DO A FACTORY DEFAULT:
FAILURE TO FOLLOW THE ABOVE PROCEDURE WILL CAUSE THE SOFTWARE ON THE BOX TO CRASH
& RESET EVERY TIME YOU SELECT THE TV SETTINS MENU.

 

Scouser, problem, that jtagged box, ive just finnished loading f,ware and plugged it in and theres only a blank screen, its got 0001 on front but nothing happens when i use remote, no channel being updated or no menu on screen, just blank, any ideas.

 

Have you unplugged and re-powered the box?

Scart output may be messed up, until you clear channel data & restore factory settings.

So view the output via the RF output, clear the data & reboot,scart should work again now.

 

every thing seems ok with connections, cant get menu up on screen, only thing it will do is let me power it on and off with remote nothing else

 

Mikey you may need to do this:

1) Connect Eurovox to TV using TV/VCR aerial connection on back of box with a coax lead.
2) Plug Eurovox into mains and switch on.
3) Tune your TV into channel 170.
4) You will see a request to enter a PIN – use the master PIN 1004.
5) Enter Menu and go to ‘Config’.
6) Go to ‘Clear Data’.
7) Enter PIN – 1004
8) Go to ‘Factory Default’, click OK.
9) Click on your Symbol rate, either Symbolrate(6887) presume you are N**. Press OK.
10) Click OK when the warning comes up.
11) Exit and then load your ‘Channel File’

 

Scouser, dont want to cause you any more grief at this hour and am very grateful for everything, im going to try this tomorrow cause i cant get 170 on my tv only goes to 99.I have NxL on NTH side of DUB. SO ILL continue tomorrow,and dont worry i have faith in this, LOL. Thanks.

 

No problem just go to a free channel and tune it in until you see the Eurovox. Time for bed here too, goodnight and I will keep my eye out for your posts.

 

just got a eurovox 2008. I'm on NTHell digital + sports package. All channels tuned in perfectly using powerscan which is great.
I've a couple of questions.

1. I can get rid of the sports package saving me that subscription which is great. Can I also get rid of the digital package in the hope that the cable will still be live and I can still use the feed coming in to the eurovox. Has anyone done this ?
2. Could i buy a satellite dish and use that as an input into the eurovox - if i did this could i get rid of the nthell digital package ?
thanks for any help

 

Answered your other post here http://forums.afterdawn.com/thread_view.cfm/584040

 

You could use a Dreambox 500S with a satellite dish but it is fairly complicated.Haven't done it myself. A friend of mine did it and said it was a pain in the arse.
And everything Scouser told you is spot on as usual!!

 

Thanks Barm although others may disagree

 

Scouser, complete success, picked up ener pin msg on chanell 32, could just about see it, was very haisy but i got thru the process and bingo ,box up and running without any problems, i wont annoy for a while now but ill be reading this thread as much as i can because its a wealth of information for EV users. THANKS for all your help.

 

Great news Mikey, and dont worry if you ever have any queries just post them, a lot of good people here to help you out.

 

THANKS.

 

sc0user my mate is in kildare and has it set at 6.875 does he need to add certain freg..?

 

hi guys still have a problem with the time on my ev. when i set the time to the correct time save it. then turn off gmt and set time manually save and do an autoscan, the time stays right but the epg is all over the place. whats on at 7 pm is shown in epg at 9 pm. am i doing this wrong. i'm on sth side of dublin on nthell

 

scOuser's way worked fine for me. I think the issue with the epg showing programs ahead of time is if the GMT off is carried out before the autoscan.

Set your time using GMT settings, save and exit then autoscan, quickly set time setting to GMT off and power unit off/on and that should do it............ at least for the 2007 model and thats for dublin nthell

 

I think that is an ex CMI area which Ch**us took over he will not get all channels as there is one or two tps missing. Look at the frequencies for Ch**us here http://forums.afterdawn.com/thread_view.cfm/531363 these are the same ones Fergusrb uses and he is from there. Each frequency will have to be added manually before you can do an autoscan.

 

Another method is to unplug the EV for a few seconds, then plug it back in. Immediately go to time settings, set time using GMT. When time is correct turn GMT off and press blue button to save and exit. If you are quick enough this will also work.

 

That worked the ~F*****g way i wanted it too good on ya Scoucser