Eurovox max security

No just go with the Eurovox Max V 2008

 

Thanks Ogg for the swift reply

 

Hi, just ran into a problem with my Euro vox max v and hope someone will help. I unplugged the box to show a friend and when I plugged it back in one transponder of channels was missing.

I suspect that it was my fault for not naming the channel heading when I added the transponder manually as it didn't show up on the original full system scan.

Now when I try to rescan on the same freq. I am getting "invalid freq. and symbol rate". I have tried adjacent frequencies but with the same result.
The missing channels still show as having a good signal on the info button but show a "no signal" when viewed normally.

Help!

 

What cable provider do you use

 

Hi, i am with ch*r*s in limerick. the channels missing were on 427. Which are bbc1,bbc2,itv, sky1&2 and C4.

 

freq's for ch**** Limerick
274.000 371.000
282.000 378.000
290.000 386.000
298.000 394.000
306.000 410.000
314.000 426.000
322.000
to add these freq's you need to
go to installation
green button for ch edit
red button add channel
enter freq and symbol rate 6875
press ok, then repeat these steps till all freqs added. when they're all in press exit and go back to first page of install menu. press the red button for auto scan. will do a scan an all the freqs entered and should hopefully give you 138 channels.or just do a full power scan with the yellow button
best of luck

 

Thanks for that, will go through it again. If anyone has the freq. for bbc1 I can just add that which would be a big help as I'm up to 200 channels with all the doubles!

 

I tried those freq's but the missing channels are still gone. I will post the working freq's below which work for ch*r*s cable Limerick city.

I'm pretty sure that the missing transponder was 427mhz. but I can't find anything there now.

My working channels are 364 388 372 380 348 444 411 396 324 356 340 371 355 339 363 410.
There are some duplicate channels which I suppose come from adjacent freq's.

 

You have to many duplicate tps thats your problem.

Latest Ch**us Limerick TPS are:

324
340
348
356
364
372
380
388
396
410
418
426
444

 

Thanks scouser, I will try just those frequencies then and let you know how I get on.

 

No problem but only use those frequencies and delete all the other duplicate ones you have, even 411 is wrong you need to come down to 410.

 

Ok, that's done. I have acquired some extra channels (bbc2&3) but the other channels (bbc1&2,itv,c4,sky1&2), which I did have previously are still missing. What should my next step be?

 

Nothing signal appears on 426, I tried changing it to 427, nothing. I'm sure that the missing channels were on 427 last Monday, until I plugged out the unit.

 

Solved! I left on the 426 TP signal level for a while and noticed that it briefly registered a signal, so I checked all the various RF connections and found that a cable that I had added to the TV from my amplifier was causing a conflict, removed cable, Boom! channels back. The amp has enough gain for both so it's probably some RF wierdness.
Thanks for the help, much appreciated.

 

No problem. Good news, enjoy

 

Hi Guys. I jsut got the EURO-vOX max V 2008, followed the supplier instructions ie powerscan: mode normal, start 300.00mhz, stop 870.00mhz, symbolrate 6.952 mbaud, symbolrate 6.837 step 8. I have been trying since yesterday no luck I live in Purley area and have sky cable. Any help?

 

Wont work on Sly cable you need to be on VM cable, i.e. exN**, telepest or exC&*.

 

Can you please send me the software for the eurovox.
my email: venkat.balla@wolverhampton.gov.uk

 

All the software is in my link below