Eurovox max security

93% to high 85s about rite have u a booster running on it??

 

no booster

 

try a factoryreset.if that doesnt work try a re flash.and if that fails go back to the old firmware u were running.

 

will do that now, will let you know what happens, thanks for help

 

Just let the box run overnight and all seems fine this morning. Thanks for the help.

MERRY CHRISTMAS TO YOU ALL!

 

Hold on, it seems now that the October software is still not working properly and channels such as E4 ITV2 FILM 4 are all still poor quality and freezing.

I have tried everything to get them to work but no luck.

I am now going to go for the EUROVOX_MAX_RED_BOX_15_03_07.bin update for the red box

However it is a BIN file and i do not how load this firmware on my box and i only have used UFL's before.

Could anyone please tell me a step by step guide od how to load the firmware to my red box?

Any help would be greatly appreciated

Thanks

 

No need to load more firmware if your signal strenght is still at 95% just get a 10 to 12Db attenuator,only a few quid and will solve your problem. http://www.beststuff.co.uk/coaxial_accessories.htm

 

How will thsi resolve my problem of all channels under frequency 530 are all freezing?

 

Go to menu, user installation, and post the average signal level/quality you have over all your tps.

 

Average quality and level and quality is 92% which is rare.

Before it was a standard 83%. Now i have loaded new software channels are freezing under 530 frequency!

 

Your signal strength is way too high, this will cause the problems you are having a 9Db attenuator will solve this for you, as per my earlier link. So for a quid problem solved All you do is plug it between the EV and coax cable.

 

Is their any chance i can pick this up from B&Q or a other big stores?

Also can i get bigger than a 9Db attenuator just to make sure?

 

Yes you can get them in Mapling but they are dearer, anywhere between 9 to 12 Db will do based on your signal strength. Sorry I have to leave, but this will solve your problem.

 

Anyone any ideas? My setanta sport 1 is very bad,pixelated breaking up, every other channel is pefect evan all the other setantas. Have latest f,ware and turned off signal booster but still the same.NTHELL DUB.

 

I would advise you not to use a loader program like Dnupman or Voxer like what you are talking about.It was these programs that was causing the boxes to pack in and need Jtagging.Use the UFL loader.There is 1 for the red box.

 

More and more channels now very bad and unwatchable because of breaking up and pixelated, anyone else having this problem. In Dub on N-L.

 

What update have you on it

 

If you mean firmware i have latest kuro beta

 

try turning off your signel booster on it if its on see if that helps

 

Done that already OGG. Are you in DUB, if so ,how is yours. It could be just localised.