Eurovox max security

Also are you both True Cable or MMDS ?

 

Standard Cable in both areas

 

have u got the cable in the right socket and scan it..?

 

Head is done in...Got a mates Eurovox max v other night because he was having trouble with it. Plugged it into my cable and it started to update..Channels came on (YAY) but the time was all wrong. When I set time right I got "NO SIGNAL".

I unplugged it for a few mins to reset and hey presto stations where back, did same with time and stations had gone again "No Signal"..

Anyway don't ask me why I did a factory reset but I get sweet F.A now..

I do a full scan and get 13TP's when it starts to scan in for stations I get CH1,CH2,CH3 probably up to 30 of theses. When i goes back to viewing it says "unknown service or channel not known"...Aghhhh

The S/w Ver 1.0stc4 oct 29 2007
H/w Ver 2.0tk5
Bootstarp V001
S/w Kuro...

Any advice appreciated....

 

Well lads

Things are looking up for Carlow,
I knew that the town's area's where been updated at the moment,
So I brought it to a friends house not far away, and scanned there, picked up everything straight away first time. .
Symbol rate of 6875....

Seems no one on my supply node has switched to Digi yet so it was not switched on at the box, But it is there.

Carlow is finally out of the dark ages.... Ha

 

Evening everyone

ok have tried all the cables and getting the menu screen on the tv

went to installation and scan all but nothing has shown up

Checked user installation

CH0001
FREQUENCY 324.00MHZ
SYMBOL 6.875 MBAUD
MODULATOR QAM64

DETAILS ON SYSTEM MENU ARE
MODEL DVB-XC BOXY TDA
S/W YER 1.0 STC4 OCT 15, 2007
H/W YER 2.0T K5
BOOTSTRAP V001
S/W BUILD KURO

DOES THIS HELP, ON BOG STANDARD CHO£U$ IN NEWBRIDGE AND MAYNOOTH

ANY HELP GREATLY APPRECIATED

 

Manually add this freg and do update chan and see if u get a few channels before adding all the freg

 

lol would be handy to give u the freg lol try 444.000 leave symbol rate at 6875

 

Thanks for that

Had already updated up freq as per previous post also added 440.000and still nothing coming up

should i delete all other channels and frequency and just try 440.000

freq's for ch****
274.000 371.000
282.000 378.000
290.000 386.000
298.000 394.000
306.000 410.000
314.000 426.000
322.000
to add these freq's you need to
go to installation
green button for ch edit
red button add channel
enter freq and symbol rate 6875
press ok, then repeat these steps till all freqs added. when they're all in press exit and go back to first page of install menu. press the red button for auto scan. will do a scan an all the freqs entered and should hopefully give you 138 channels.
best of luck

 

Just to add, does the QAm make a difference? have it set at 64 also tried 16 and still nothing

thanks

 

hi there total newbie

got a eurovox max from a friend who doesnt want it, iving in south dublin on N**

plugged it in the other day got 140 channels..now its gone t**s up

how do i start all over

and whats "flashing"?

 

OK you need to go to menu, config, clear data and then clear channel data. Then do a normal powerscan from 290.000 to 403.000 using symbol rate 6887 N*L

 

did that, only getting 60 channels

 

Did that as well Celtic71 , but I'm getting sweet Fa. On N*l as well...Have main cable plugged in.Check my post up above..please anyone..

Also if I was to flash again with software and firmware which would do I use? There seems to be a lot to choose from...

 

Flash it with the kuro beta file you will get it in my link below after thats done u will see a oggnogg CDF file there too its a channel data file put that on it too

 

Helping a friend out lads, or at least trying to. She has a Eurovox Max on NT* in Ballymun. It was working fine, now its not. No channels show up which i think is a bit strange. When i brought it up to another friend's, i used his PC to update the f/w. I update with the "Eurovox_Max-V-Black_02_07_07.bin" f/w.
When i plug it into my mate's aerial in the RF in (he's also in Ballymun) really weird thing happens. The Quality and Signal bar pops up and down to 98%, 100% and back down to 0%, 10%. it's really weird! any ideas anyone. Tried doing a power scan with symbol rates and frequencies that's been given in this thread. 270-400 and symbol rate 6887. Is there a secret menu with access to EMU to switch it on. Do any of you think the box is faulty, with the quality and signal bar bouncing around? His box works fine on his connection. So i dont think its his connection. Any help would be really really appreciated!

 

Put the lastest update on it its in my link below (Kuro Beta) and add my oggnogg cdf file in the new update there is a signal booster in installation try it on and see if that helps

 

will do and will report back to you. Thanks very much, oggnogg

 

oh whats the craic with EMU and secret menu on Eurovox Max?

 

Theres no need to worry about that its not like the starview lemme know if it works for you after u update itand add the cdf file