Eurovox max security

Ok forget all the above, got it sorted. Flashed with older UFL then flashed with the new beta and all scanned in great. Now if I was to use the cdf file, does it put the channels in order for you? Is it advisable to put it in with all the channels in already? Oh and what do I press to on the loader, browse-(cdf file)-download or upload?

Thanks

 

you brown with the loader and press the bottom download button and yes its ok to overwrite with the cdf file and the channels are in order

 

im in the southside and there is a cdf file in my link below i use called oggnogg cdf

 

Hi I'm looking for some info , I bought a eurovox max v 2008 . After only a week of viewing the box went into stand-by mode , when i tried to flash it my pc could not find the box (maybe because lack of power?? ) I had a read of the tread and the advice was to send the box back to the supplier . After a number of e-mails got no joy (he was being a pr--k) he told me i had to Jtag the box . Could anybody post a step by step guide on how to Jtag and what exactly i need.
Kind Rgds

 

pound
did you get your box sorted out. i'm in the same area as you and all is working perfectly. if you can't pull in all 13 transponders then send me a message and i'll post the freq's and you could manually add them and do an autoscan. I've seen this happen before in this area some boxes will only pick up the first 7 or the last 7 transponders and you ahve to add the rest yourself but it will eventually get them all. let me know if you need any help.

 

Thanks for that...Done and dusted and put to bed once and for all....

 

No problem

 

Scouser
Thanks for that. I picked up a lot more-- 120 TV channels in total.
Happy out now Thanks. Pints await.

Debic
Thanks for your note. Do you think I have them all now or are there more ?????

 

Not 100% sure of your area, but Debic could tell you but I wouls say you can get more, have you got 13 TPs in user installation?

 

Thanks Scouser
I'm not sure how many TP's I got up but I'll have a look later.
I'm sure Debic will be able to fill in the blanks if there are any

 

Debic
As you can see from my last post, I'll count the TP's later.
I searched from 275-460 and as I've said have 120 TV Channels up at the moment.
If I don't have the 13 TP's you mentioned I'd be obliged for assistance in tuning them in

 

A friend of mine wants to get a eurovox boxs,but dont know should he get a 2007 one in red box or the new 2008 black one,i have 2007 one and no major trouble with it just keep up grading firmware.but is the new 2008 one much better, any advice.

 

New 08 Max V better EPG, widescreen and tuner. Also most of the 07 models now sold are clones.

 

HI
Just had a look.
I'm picking up 11TP's from 273 to 435 approx

 

Strange indeed try adding 444.000 manually and see what that pulls in.

 

Scouser
Strange indeed. I'm now picking up 12 TPs but still on 120 channels, no increase in channels from the 11 TPs ( might have got more radio didn't look )
Tried manual searching for 444 but box does not seem to be allowing me.
Pressing blue button for manual search and nothing happens ????
Not to worry I'm happy with what I got at the moment

 

To input tps manually.

1.Press menu, installation, user installation.
2. Press Green Button, then red button to add.
3. Press Info button and Change CH NUM to 0013.
4. Input frequency 444.000.
5. Symbol rate 6875.
6. Press OK to save.
7. Exit out to user installation, (TP Screen).
8. Go to CH 0013, (new one you have added), highlight it and press OK.
9. Now press Blue Button to do a manual scan on that one frequency.
10. Let it scan and then exit.

Any new channels on the new TP will be found at the end of your channel list.

 

debic any chance you could upload your cdf to eamos thanks

 

hi folks,

havin a bit of a problem.
i have the 07 eurovox on N** in clondalkin. the box was workin perfect until last week when the signal kept dropping below 80%, the channels then freeze and most of the others are blank.
I've tried the box in my friends house in a diff area and all the channels work perfect.
Even tried a diff box in my house and the same happened to that after a few mins???

Any ideas wat the prob is?
Thanks.

 

Hi Guys,
Was looking at getting the Eurovox MAX 2008. I'm in the Ratoath/Ashbourne area and have an N*L MMDS service. I know the box works great as a got a loan from a mate and had no major problems in setting it up. My question and worry is that because the MMDS service is a purely digital service that N*L would be able to detect the Eurobox on the network. Is it possible for N*L to see anything other than an N*L box on their network? Thanks for any advice.


Conlai