Eurovox max security

He will need to get the eurovox TX model They are a new box made for MMDS

 

Or The Box T, or any T type box with the right firmware.

 

Scouser will the Eurovox TX work on the digital in dublin (City West)

 

Ogg think I know where you are talking about and AFAIK it actually N** MMDS there, so a standard box will do. Thats me off for the weekend, have a good one

 

A friend of mine has a Eurovox TX working in Kilcullen.He gets about 94 channels(movies sports etc)
Just make sure its definitely Ch*rus MMDS

 

Scouser i know your the man for this problem

i ahve max 2008 box that i jtagged with 2008 tsop and then flashed latest image and channel file everything worked plugged it in and out a few times to make sure was ok

i came back to hours later plugged it in to check it was ok and back to 2 dots

when i jtag now kepp getting 2 dots tried skymax and jkeys still nought this has me baffled

 

Scouser is away for the weekend , Im sure he will get to you when he gets online , maybe send him a PM to direct him here so he can give you some advice

 

cheers was thinking could be cap i read about before can't remember which one think it was c22

 

just got it running again with skymax just after post will let you know if it lasts this is weird

 

No problem , Im not too sure about the caps but it might be the c11 or c21

 

Had the same problem(Brand new box).Contacted supplier and had to send it back.He usually sends me a new board but for some reason he wanted this one back??

 

had a look this morning gone again left the power on all night unplugged and gone again

 

Decco worth having a look at the C14 cap as you said.

 

tried 2008 box on mmds n/l in north dub would nt work any hints

 

Yep a powerscan using 6887 will work on N** MMDS.

 

ok scouser try again thanks

 

Got a eurovox installed on C**** in limerick. Got 138 channels off 13 tp's. Only prob is the irish channels are breaking up and are pixelated. Just rte 1,2 Tv3 and paramount.

Any help guys would be appreciated.

PS aslo the tv guide is gone mad. Showing whats on now but it's what was on an hour ago.

 

The time problem can be fixed by~
1. unplugging the unit for ~30sec's
2. switch it back on and go to time settings
3. using GMT-1 or +1 set correct time.
4. once time is set you now switch of GMT.
5. then use blue button for save and exit.

this normally works first time but may take a few attempts.
make sure to adjust time as per step 3 first.

As for the blocky reception this is most likely caused by connections not being 100% but you could probably try to change the TP strength first.

1. When viewing channel in question press info button twice to find out which TP frequency it is on.
2. Press menu, installation, user installation. enter pin.
3. Press Green Button, then blue button to modify.
4. Here you can try to adjust your freq a bit to see if you may get the signal strength that bit stronger, i.e. adjusting 315.000 to 315.500 may bring the level and quality from 70% to 80%.
5. If you find a better signal then press OK to save.
6. Now in the screen that is left displayed you can press ok to enter
a tick mark beside the TP you just updated.
7. Once the tick mark is beside the TP in question now press blue button to update the channels on this TP.

If this does not work,
now I would start hunting my connections.

Also optimum signal strength is achieved when the unit is the first inline connection from your service provider's 4 point external hub.
i.e for best results make sure the box is there is no splitters etc between the external hub and your box.

Hope this helps.
Tom

 

Try adjusting the freqs that these stations are on eg.change 291.00 to 290.750/291.250

 

tombull and barm spot. Thanx for the speedy and accurate response.