Hi everyone Updated my box with the new udf file problem is the signal strengh has gone from green to red so it will pick up no channels.Flahed the previous version kuro ver 3 with signal fix and signal is ok.Is there a signal fix for the 30/11/08 udf file.Thanks if not will put in codes manually can some one point me in the right direction please as keymaster is not showing any thanks
No Firmware fix for the 8% signal problem with regards to the updated firmware. Wait to see if anything is released. Keep checking here. http://forums.afterdawn.com/thread_view.cfm/722659 Also, http://forums.afterdawn.com/thread_view.cfm/674371 it will be added to the guide if released.
Hi all, I'm having problems with my Black Eurovox DVB-XC Box V TDA 1.0 STC4 April 18 2008. I've just updated it with the November fix. Problem is this: I updated the firmware in April. Worked fine. Then, out of the blue about 5 days later, the signal started jumping from 80% down to 10% thus causing loads of "no signal" errors and breakups. I tried and tried to sort the problem out and ended up just leaving it. While helping a neiboureeno tonight to update his (kryptnet box), I thought I'd try my box again. I updated with the November fix and it worked perfectly at his house. Constant 80% signal and no breakups on all channels. As soon as I tried the box again in my house, it started again with the signal problem jumping 80% down to 10%. We only live next door so I really cannot understand what is going on. Any ideas guys? PS. compliments of the season to one and all!
