Eurovox Max V

Hi Boys & Girls, fter reading so much about this fantastic bit of kit I decided to take the plunge and get one.It arrived today and I set it up. I only have V.M broadband - no TV package. After a couple of scans I now have 249 channels(Fantastic) but the majority of them break up quite badly.(Not so Fantastic) I have used a good quality splitter, cable and F connectors. The signal strength and quality of most channels is about 83% which seems high enough. Any ideas.

 

i used a signal booster from argos and it worked a treat

 

Cheers iboyle, will have a look.

 

i had 1 that kept doing that it might be the tuner and u might have 2 send it bak 2 wher u got it or get in contact way the person and say 2 him wot is wrong the boxes are marked on 5 diffrent places so the now wots wot

 

If you have the latset KURO firmware installed there is a signal booster installed

SIGNAL BOOSTER

If you live in a low signal area and have weak signal problems with poor results when scanning or picture breaks up when watching.

Go to Menu /Config / Settings /Signal Booster

The Default Settings Off

Switch On/

Press Blue button to Save & Exit

 

Tried that Celtic,still no joy. It's doin my head in.

 

Try it from the main cable feed and see if its any better

 

No Celtic it's just as bad

 

Ok , Press Menu > Config > System Information and tell me what is says please

 

I would create a ch dump and then re-install firmware, I had similar issue at first and this resolved problem. I also found my connections was not the tightest fit they could be.

I would also follow celtics advise and update to KURO firmware due to the signal booster, the firmware is still in beta status but all is ok with it.

 

Info for Celtic

Model DVB-XC BoxV TDA
S/W Ver 1.0 STC4 Oct 29 2007
H/W Ver 2.0t K5
Bootstrap v001
S/W Build Kuro

Hope you can help.
How can I find out if this model (Eurovox MaxV 2008) is a clone?