Eurovox New Software Released.Tested and Working.

Ive got my cables now im trying to update the firmware. I downloaded the "DnUpMan_4.exe" program but when I get to the 1st screen and browse to the "EUROVOX_MAX_BLUE_BOX_01_06_07.bin" file and press "download" it says "The receiver was not detected" "If you want to download the firmware in the boot mode, click OK button below and AC power on your receiver" this then has the option under COM port setting of COM1 COM2 COM3 and COM4 Where am I going wrong? Im sat with a copy of How to setup an older blue eurovox on my knee but cant get it sorted.

 

edited by ddp

 

just use the universal loader which incorporates the 10-04-08 files. get it in eko link under my post

 

I will give it a go, but surely i will end up with "The receiver was not detected" "If you want to download the firmware in the boot mode, click OK button below and AC power on your receiver"
wont I?

 

I am using a RS232 crossed cable from box to a RS232 to USB to connect to PC, im stuck with a window saying "Firware download version 2.20" "waiting for the response of your receiver"
help please

 

Im pulling my hair out.... im searching the forums for an answer but cant find it, I didnt get a cd driver with my cable, do i need one? im running xp

 

sorry ddp, im new to this and havent got a clue, although i do try. Is there a link at all to updating the firmware by USB?

 

u may need to plug out (reset) your box after u begin to download firmware..

 

Chxxxs Codes 16/4/08
86/77/c3/84/DD/B8/AF/34
9A/2D/B5/86/1E/30/OF/5D

 

any body got code for NTL dublin area?

 

:-( Can someone please help me with my eurovox. I downloaded all the software, i have the right cbles ( bought after reading it here)?

I am everything exepect technical, i am really desperate. I have been reading to masses of forums and threads, and really lost.
Any kind of help will be much appriceated.

I have a eurovox 2006- I never flashed it before.
I set up my cables and stuff but cant even find the com..:-(

 

Think I got it sorted now...... after struggling I decided to check out my youngests pc, its fairly old and low and behold it had a Com port on the back. I managed to download the firmware and flash the box, switched it back on and..... nothing checked wires at back of box and realised I had a couple in the wrong place.

Thanks all for helping

 

Hey guys,

I updated my MAX V 2008 with the above firmware and did the scan after as usual but now im not picking up any channels at all.. Any ideas?

 

Hi guys, newon here.

I have a Eurovox Red Version, i have downloaded the UFL Max Red 100408 file and it went on fine. I have then done a system reset as stated. Which i presume is from the Clear Data Menu and then Factory Default.

It asks me for Symbolrate 6952 or 6887. I live in an ex C&W and now NTL area in the north west. I presume i use the Rate 6887.

When i do this it goes to a screen called User Installation using a full power scan. On here it asks you to change the start and stop frequencies, then fout symbol rates are below but only onehas the valueof 6.887. When i perform the scan it finds no channels.

When i go under the User Installation option the table which has CH Num, Freq, Symbol Rate and Modulator is all blank.

I have seenthat i need to put a provider code in of 5041 or something.

Am really lost....is anyone able to help???

 

If your on chorus the new firmware does have chorus incorporated yet,so you just have to wait untill its out,hopefully soon!

 

Does anyone have the new codes for Ch**us?

EDIT: Sorry just saw the codes above, will try it now! Thanks

 

Yeah Im having the same problem.. N*L Dublin... not picking up any channels at all.. think switching to the new firmware was a bad idea.. Altho it seems to be working for others.. Anybody else in the dublin area get going on the new firmware?

 

have you checked your provider code is in the box? My provider code and keys had all gone back to 0