Eurovox New Software Released.Tested and Working.

I spent the last week reflashing hundreds of 2006,2007, and 2008 boxes with the 10.04.08 firmware. I've only received one call re the transponder issue and that was a 2008 box. I'm getting it back in to see if it can be fixed - I'll post the result here!!

 

Yes this is just for the black boxes.

 

You have no channels on your box. Do a power scan.

 

Hi guys,wondering if you can help me, just reset my Eurovox back to factory settings (see below for sw details) now all that I get when I power on th box is the Green Lock and the Yellow Message lights on at the front and the : as if displaying time, nothing else. I have tried to upgrade sw the latests 18-04-08 but no luck. Im using female to female null modem cable.Any help would b great

Model: DVB-XC BoxV TDA
SW: 1.0 STC4 Oct 15 2007
HW Ver 2.0t K5
Bootstrap v001
SW Build Kuro


Is it possible I may have to upgrade an old version sw before I then try to upgrade to the newer one?

 

I have the eurovox max v box and i have just gone out to buy the cable needed to reflash it..


can anybody tell me how to do it ?

i have the software downloaded from the links, but im not sure if its the correct software.

can someone please post a step by step with the correct link for the black eurovox max v box with silver buttons?

thanks alot it would be much apreciated and im sure alot of people will benifit from a step by step.

cheers mike.

 

hello,
I promise you Ive searched and searched for this (since 5 today, never mind the hours this week!)Im , but struggling to get the full channel set up now ive flashed my eurovox blue 2006.
Done 3 power scans, changed to my ex-cw 6887 symbol rate
getting about 20 channels and nothing else ( I also changed to the new keys posted yesterday morning)the channels Ive got are good to go, tried to do manual scan, it just freezes, also tried AU too
Im flummoxed, OH is frothing at the bit for the boxing, as Imsure we all are

But most of all I would like to say...thanks to all you guys and gals over the past few weeks, I would have been stuck without you all, it is much appreciated

 

Hi guys,

I have been away for last 3 weeks been married + honeymoon and have come back to this mess. Whats goin on?

I promise i have looked around but there are so many threads around and all about different types of boxes.

I am in Limerick on C£$%^s and have black Eurovox 2008.

Please help all i want is to know where to get the new codes.

I dont know how to update the firmware and dont think my laptop would be able anyway.

Thanks a zillion!

 

Forget about putting in new codes. Update the box yourself or do a Google search. There is a dealer in your area.

 

How do i update the box myself, not very comp literate?

I actually dont mind updating the codes
Thanks again

 

are you sure its only for max v 2008 .what about the other eurovoxs (red and blue box)will there be another fix for them.

 

yes a mhac. just for 2008 box.

 

I take it Im fighting a losing battle this evening to get it sorted

thanks anyways all

 

Link on how to do it in my sig! Make sure you have the NULL MODEM cable

 

Thanks guys, the problem was due to low signal coming in.

 

Hi Guys,
Just joined the forum.
Can anyone assist or advise how to overcome the NTell problems of constantly changing codes.
Is it possible to update the Eurovox Max V 2008 software to get back to watching TV without Interruption.
If it is any ideas if the update works and is it easy to install????
and where to get it for Dublin
Any advice or help is appreciated.
regards

 

Hi guys,
Just wondering if anyone would have input into my issue posted earlier. When I power on the box (EuroVox Max v) the only lights are on is the Green Lock and the Yellow Message lights on at the front and the : as if displaying time, nothing else. I have tried to upgrade sw the latests 18-04-08 but no luck. I get the option of COM1,2,3,4 2&4 automatically fail while 1 and 2 stay at waiting response from your reciever. Im DEFO using female to female null modem cable as Ive used it previously to upgrade network routers.Any help would b great

Model: DVB-XC BoxV TDA
SW: 1.0 STC4 Oct 15 2007
HW Ver 2.0t K5
Bootstrap v001
SW Build Kuro


Is it possible I may have to upgrade the box to an old version sw before I then try to upgrade to the newer one?

 

I HAVE THE EUROVOX MAX

I HAVE NEVER UPDATED THIS BOX BEFORE .. WHAT SOFTWARE DO I NEED FOR IT . ALSO WHAT LOADER DO I NEED PLEASE How do i manually input codes and can someone tell me what the codes or code is please.
my box has'nt been working for a week or so. can u please help.

 

firmware can be found in the link below, codes also, to manually input them press menu, ok on language, then type 1968 1968 and enter the new codes, save each line, no need to do another scan as if you have inputted the new codes correctly the channels will come back on immediately

 

Do not use this software Euro+Fix+chorus.rar. It is bogus software and will damage your box. Can someone please remove it. Download the proper software here:

http://www.mediafire.com/?dtmdycgdwqu