Eurovox Problem

Hi sc0user.
I'm in liverpool and since i moved from Kensington area to walton, i have not been able to get any channels...i get strong freq levels but not signal it really poor.
I have tried updating my Eurovox max3 2006 Box. even tried using sc0user NTHELL SUB FREQ...i get channels listed but no channels appear.
HELP!!!!!!!!!

 

My channel list wont work for you as it is for Dublin N**. Do this instead.

1. Go to menu, config, clear data, clear channel data, press OK.
2. Do a full powerscan on 6887 for N**, if you are now on Telepest use 6952.
3. That will find your frequencies.
4. Press red button in installation, user installation, to do an autoscan after frequencies have been found. That should be it.

Sorry gotta fly

 

Full scan done and i have did this several times to no avail. As stated before i get the level bar go up and down from 5% to 98%, but its up and down constantly.....As for the Quality bar it remains and never moves from 5%..hence i get nothing found whats so ever.

 

Have you got a live feed? What version of firmware are you using?

 

I have used Eurovox3epgfix and last updated with eurovox max-v 02-07-07.
The feed is live.
I have now just decided to sell it...gave up.
thanks.

 

hi
rastan1 did you ever sort this as i am having same sort of problem
with jkeys when try to erase it comes up PROBLEM IN SECTOR and skymax will not write to 0x7fe00000,size0x0200000 any help would good thanks

 

What model/year EV do you have?

 

eurovox blue 2006 Init JTAG
IDCODE : 1D405041
CPU : STi5518
Stop CPU
Clear Trap : Please Wait...
Load Trap -> Ram : Please Wait...
Load Trap : LEN Ok
Init Trap : Please Wait...
Trap_Wptr 80000534
Trap_Iptr 80000140
Start Trap : Please Wait...
Load EMI : Please Wait...
Init OK
---------------------
Init JTAG
DCU OK
Trap_Wptr : 80000534
Erase ADR[7FE00000] : Please Wait...
Erase success !!!
---------------------
Init JTAG
DCU OK
Trap_Wptr : 80000534
File : F:\tsops\EV_MAX_BLUE_190207-TSOP.bin
Write Flash ADR[7FE00000] LEN[00200005] : Please Wait...
Error writing flash at address 7FE00000 ACK = 00000100
Write Flash END
---------------------
when jtaging it sky max says as above j keys when trying to erase a message saying error detected erasing sector

 

sorry scouser
got it out of stanbye with jkeys, now it has gone to saying PEAA on front pannel, i have read that you can flash it when it is like this but when i select 2006tsop it says wrong firmware file i am pritty new to this stuff can you tell me if iam doing things right.thanks skinnermc

 

up and running again thanks m8