Experiencing Difficulty Using DVD RB and CCE? If So, Then Ask Your Questions Here.

Sophocles

I'm using an trial version (free download)

Last night, i've made a refresh install of my PC :

Format of C:, Win2k SP4 + drivers of my CM (Asus P4PE) etc...

Just before sleeping i've tried DVDRebuilder + CCE 2.66.01.07 trial Version + EclCCE 1.81
And i don't know why but IT WORKED, i've just launched the 'Prepare step' and no more Error Message, tonight i will do all the steps and try to make a decent copy of my dvd (24h season 2).

I will keep you informed of the continuation of my experiments.

Thank you with all for your kind assistance and not to hold account of my English level

at this evening for the continuation



I will keep you adv

 

kickit

In your Ini file it listed CCE Basic, CCE basic trial version doesn't do anything it will only encode 3 minutes of video. You either need to download the trial version of CCE SP and follow the instructions for that or buy CCE Basic. If you decide to try CCE SP be sure to get a version lower than 2.67.

 

Sophocles, i bought today version 2.69.01.04 of Cinema Craft Encoder basic (file CCT2.exe).

When I encode it takes only a few minutes and if i run the Rebuild function i've got a buffer overflow

It speaks 2 you ?

 

kickit...
Will you post your Configuration Settings from the Rebuilder folder?

 

For those experiencing the Retail v2.67.00.xx errors -- it should be fixed. Download the new version from Doom9 (press the "Check for New Version" button under the "Help" menu).

Enjoy.

 

jdobbs

I can't afford that problem but I downloaded it anyway, thanks.

 

It has another important fix for a spurious erroneous SCR value.

 

Hi,

I will post my Configuration Settings from the Rebuilder folder tonight after work.

regards

 

Kickit
The present problem is a real basic setup problem but I haven't experienced it since my first setup and forget what it is.
Go over everthing in the guide one more time and I'll try to remember what it was.

 

Hi all,

here's my configuration settings

[Options]
Mode=1
CCE=2
LoadPlugin=1
[Paths]
CCEBasic=C:\Program Files\Custom Technology\Cinema Craft Encoder Basic\cct2.exe
CCENEW=
Source=L:\24H\VIDEO_TS\
Working=L:\PROJECT_CCE\ETAPE2\
MPEG2DEC=F:\Project_CCE\Etape3\MPEG2Dec3dg.dll
DECOMB=F:\Project_CCE\Etape3\Decomb511.dll
[CCEOptions]
VBR_bias=10
Quality_prec=4
eclPasses=4

 

Kickit...if you followed the AD setup guide, this is what your RB config file should look like. Avoid making any changes to the CCE Options until you can get a non-edited DVD Decrypter file to work properly. Also, CCE Basic will not do more than 2 eclPasses.

Have you installed AviSynth? I would mention that the Decomb511.dll filter is usually put in the AviSynth plugins folder by convention, although you can point to it anywhere. I would suggest running RB-CCE without DECOMB until you know the basic config works OK.

[Options]
AudioDub=1
OneClick=1
NoWarn=1
CCE=2
idct7Opt=0
LoadPlugin=1
Completed=4
QTrellis=0
[Paths]
CCEBasic=C:\Program Files\Custom Technology\Cinema Craft Encoder Basic\cct2.exe
MPEG2DEC=C:\Program Files\DVD Rebuilder v57\MPEG2Dec3dg.dll
Source=C:\ASIGNS-RMP\
Working=D:\ASIGNS-CCE\
[Setup]
Languages=1111111111111111111111110111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
sLanguages=1111111111111111111111110111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
[CCEOptions]
VBR_bias=25
Quality_prec=16
eclPasses=2

_X_X_X_X_X_[small].
.


I am always doing that which I can not do, in order that I may learn how to do it. (Pablo Picasso)[/small]

 

Thanks Doc for the configuration file

A new message appears 'Frame Size 848x56 is not supported. Supported frame size is up to 520x76'

MPEG2Dec3dg.dll file is in the rebuilder's folder, and i've checked Add to AVS file

 

When you moved the MPEG2Dec3dg.dll to the Rebuilder folder, did you also change the path in Setup?

 

Really thanks for your help...

But now i've got a buffer overflow like is described in the first page

dvd ripped + working and destination path are in the same hdd.

i try to re-authoring a disc of 6.93 Go maybe it's too heavy for DVDrb

 

Did you play one of the AVS files, and if so, what message did you get?

And no, the DVD isn't too large for RB-CCE if this is what you meant. If you actually re-authored the DVD, please do not do this until you know that the basic setup works. Just use a file straight from Decrypter.

I would suggest you delete everything in the RB configuration folder, and then go through the setup again ... and follow the guide step by step.

 

Greetings!

Here is a odd problem for the collective to work on. I have recently attempted to back up ZooLander. The base DVD was about 8.1 GB. I set DVD-RB to half D1 and steal space from extras 33%.

It starts to get a little odd from this point. I used DVD Decryptor to Rip the DVD. DVD Decryptor came up with a screen wanting to know what region this disk should be in. I selected region 1 and let it do its job. Next, CCE Basic is in the rebuild stage, CCE basic gets an error and terminates. I close the application and CCE Basic opens up to work on its next segment. I checked the rebuild log and all looks fine. Does CCE have issues with some movies? This problem has only occurred when I see the region screen. I have also attempted to use a background dycryptor to bypass this problem. I am using 2.69 (retail. I have had no problems in the pass with other movies. Any thoughts on this problem?

 

Dang it i still have my RB problem (the audio is messed up and the video is pink, altough you can make out what is in the video) I did ROTK with Intervideo DVD Copy 2 platinum, and it works fine (the quality is good, but, not as good as RB/CCE)

Well, just to see if it fixes my problem, i am going to reformat my C: drive and reinstall Windows (as well as everything that has to do w. RB/CCE)
I will update everyone on my success (hopefully!) w. RB/CCE

 

Hey POP

Sometimes a reformat is just what the Doc ordered.

 

lol. The thing is, I've yet to see where a fresh install with CCE Basic retail ... according to vurbal's guide ... didn't result in complete success.

@pop_smith. Your efforts to try to solve your problem without doing a fresh install are appreciated. If one person has a problem, it means someone else will likely have it in the future, and it would have been nice to have a solution that could be offered. One has to decide when it's time to fish, or cut bait, as the saying goes.