Experiencing Difficulty Using DVD RB and CCE? If So, Then Ask Your Questions Here.

drmadcow

I have almost 600 movies in my collection and I've backed up over 200 using Rebuilder/CCE and I've never seen bit rates even close to being that low anywhere on any of them. Check your settings and then try again.

 

Feign was used in a jocular manner following your rather verbose diatribe to correct me on matters of law. That was in reference to an earlier remark about English being a second language and your not having complete command of the nuances of the language. Guess you don't have a sense of humor or you missed the connotations.

Strange, where did I question your honesty? I may on occasion bandy words, but I don't remember doing so here. Where were the insults? What was ill informed and what was incorrect? Not realizing you're using hacked programs may be a bit naive, definitely ill informed.

Strange you mention Spanish being an abrupt language, yet you look for innuendo in English. Though I don't have any command of the Spanish language I do remember de nada and por favor being in the Spanish lanuage for the more polite.

I fear you may just be feeling paranoid about your actions and feel the need to defend something you've done. I've neither questioned your motives nor your actions. [bold]The discussion was about hacked CCE SP programs which affect support and working with Rebuilder.[/bold] Besides being a bane to developers, the hacked apps don't always function properly as pointed out by you and drmadcow. He said he couldn't get the "Works" to work. Here is your post on the topic.

I copied your direct quotes so I couldn't be accused of twisting your words. You admitted to using hacked programs. Whether ignorant of the fact or not, I didn't try to judge.

As a Junior Member, you should know by now not to be running off track on a thread. Also, the PM function is there for personal communications. (Any harassing PMs I receive are reported to the staff. PMs are not necessarily private.)

Frankly, I feel your attitude and actions to be a bit offensive. If you have personal issues, you should take them elsewhere.

 

That's it, if you people can't provide useful information that will be helpful to new users then you're in the wrong thread. I appreciate the removal of off topic posts. This may be a large thread but it's not obsolete, it continues to provide service because of a continued growth of DVDrebuilder.

 

Sophocle,

Well said on a more thread focused note.

I ran into a "subscript Error 9 - out of range error" when backing up a BBC television series. The series was unmodified (nothing edited). The rippers used were Decryptor and AnyDVD.

Could this error be caused by the encoding of the source in question?

 

I guess "you people" includes me. I was trying to get back on the topic when Ozzy felt the need to go off on a personal tangent. The point I was making was very relevant to this or any other thread dealing with Rebuilder. And here is the point (it has been made by Sophocles and others on different occasions), [bold]"works" or hacked apps don't always work the way they're intended to. These hacked apps are not just a problem for the developers, but also for the people who try to aid in the support of these programs.[/bold] The problems we've encountered with hacked CCE trials messing up Rebuilder is a prime example.

Interesting when the pot calls the kettle black...

It would be nice to get back to helping people with legitimate problems with legit software.

[bold]I believe it is a positive endeavor to inform people trying to use Rebuilder to stay away from hacked CCE software for the reasons stated.[/bold]

 

@Gnomex

Have you tried "DVD43Free"... if you didn't give it a try... you have a simple explanation how to us it on the home page of my site: www.dvdrebuilder.com

keep it UP

 

Brobear,

Please take resonsibility for your own words and posts.

The behaviour is some what disapointing. You have no problem offering unselicited information but are unbelivabley sencitive to the correction of those statements. I doubt the corrections I made to your statements can be proven incorrect. And they were simply that, "correction" to your statemnts, not a "personal tangent"

I feel on more than one occation, I have made an effort to walk away from this subject, but it seems you are not capable. Maybe it would be better for your state of mind, and the future of this thread (As you seem unable to let go) that I remove myself to another forum. which I do now.

Thank you for those who have contributed to my questions, and help resolving my problems.

Gracias y adios.

Ozzy

 

rockas

I've used DVD43free and while it's a good app, AnyDVD is superior. In fact it was my use of DVD43free that lead me to AnyDVD.

 

Never tested
But AnyDVD isn't free, is it?

 

@rockas,

I have used DVD43 in the past. While it is a working CSS decryptor, AnyDVD and DvD Decryptor are both more up to date.

DVD-RB failed and gave me a run-time error 9 "Out of Range".

The run-time error 9 is caused when a person ededits a movie a little too much or a problem happened at the ripping stage. Well to cut to the chase, neither situation happened.

@Everyone

However, this DVD was a british (BBC) television series. Could this be a possible problem?

 

rockas

It's true that you have to pay for AnyDVD but it does a lot more than just decrypt and it's updated often, even more than DVD Decrypter is.

 

I agree with Sophocles, AnyDVD is the better choice. Also, it is updated more quickly than other decrypters, if not more often. The DVD43 was only just recently updated to address the newer structural encryption systems. Also, I had a bad experience with DVD43 on my system. It started folders opening on startup, which was annoying. My feeling is that AnyDVD is one of the essential apps if one is going to backup DVDs. The other 2 programs I consider essential are DVD Decrypter and DVD Shrink, both free. Using Shrink (No Compression) with AnyDVD to rip files to the hard drive corrects some of the bogus IFO info left in DVDs by structural encryption. Once a person has a good set of files, it's no problem to go ahead and encode with RB/CCE.

Ozzy... de nada y adiós.

 

Hi am backing up my copies of, Lord of the rings extended versions, I was wondering if anyone had done thiers, and if they had any advice.

I have already done the extras DVDs X 6 at 41% and it looks good. The movie disks x 6 range from 7.3 to 7.8gig. Any suggestions on tweeking for the best result would be appreciated.

Thank you

Nolos

 

Not a lot to tweaking RB/CCE unless you do some editing. Leaving out unwanted audio and subtitle tracks is always a good idea. Under mode you can use Steal Space From Extras for a decrease in compression of the main movie. The beauty or RB/CCE is that it works so well under compression that you don't have to delete the extras to get a good backup.

At 7.3 to 7.8GB, you shouldn't even have to use the Steal option.

 

Does anyone have some links to newer guides on DVD Rebuilder with CCE.I have read the guide here and would like to find some more info with the newer versions.

I have been using Derypter with Shrink or Nero Recode2 and would like to move to the next level.

 

Okay, I could really use some help here. Any idea on how to actually handle this problem I'm having below...



This message comes up straight after rebuilding segment 5. Would running defrag help this at all or is there basically nothing I can do? Files are coming from the same HD, I just have partitioned drives for the OS/Program, DVDR files. Any help would be much appreciated.

 

@jdobbs
CCE SP trial 2.70.1.5 works with Rebuilder v0.77 (earlier versions as well); the SP trial 2.70.2.0 does not. When RB finishes the preparation stage and goes into encoding, the CCE 2.70.2.0 trial opens but it doesn't receive the command to start encoding. Manually clicking the "Encode" button starts the encode. However, that has to be done with each individual file. Not too many people would suffer through that. I tried the 2 versions using the same Rebuilder setup with the same configuration files; so it appears to be something different in the two latest CCE SP trial versions. Any idea of what's happening or are the CCE SP trials after 2.70.1.5 useless as far as RB is concerned?

 

I mentioned this on p.61 on this thread and I'm not sure but I think I was accused of using pirated software when it was clearly a trial. Glad to see I'm not the only one experiencing this problem, which means it'll be taken care of being that its been brought to attention by a Senior Member. ;-)

 

@brobear

That's a bug of that version of CCE but is has a simple workaround. Go to Setup window (menu options->setup) and check the option "Run Apps Minimized".

 

@HKT3020

Seems like there's one file missing on your encode... check if you got all the m2v files on your working folder or try this link:
http://forum.doom9.org/search.php?s=&action=showresults&searchid=1309158&sortby=&sortorder=

It will help you