Hi apologies in advance as this is very likely a very newbie common question but... I've tried twice to burn with Shrink DVD from files stripped using DVD Decrypter. Both instances my burner has failed to close the session and end up making coaster. I'll tack on the error log below. TIA for any help Michael 23-0002-xxxxxxxxxxxxxxxxxxxx Windows 2000 5.0 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 10:18:06 PM Nero API version: 6.3.0.3 Using interface version: 6.0.0.0 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <_NEC DVD+RW ND-1100A> Version: 10GE - HA 2 TA 1 - 6.3.0.3 Adapter driver: <atapi> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 2 ID 0 DMA: On CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 2 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8163 D: CDRom0 _NEC DVD+RW ND-1100A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 255MB (261128kB) Free physical memory: 27MB (28008kB) Memory in use : 89 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.2.2005 NeroAPI 5:32:27 PM #1 Phase 111 File APIProgress.cpp, Line 253 DVD-Video files sorted 5:32:28 PM #2 SCSI -1065 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x03035000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x20 0x00 5:32:28 PM #3 Text 0 File Reader.cpp, Line 118 Reader running 5:32:28 PM #4 Text 0 File Writer.cpp, Line 124 Writer _NEC DVD+RW ND-1100A running 5:32:28 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 5:32:28 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 5:32:28 PM #7 Text 0 File Burncd.cpp, Line 3101 Turn on Disc-At-Once, using DVD media 5:32:28 PM #8 Text 0 File DlgWaitCD.cpp, Line 240 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286111 (508:01.36, 4465MB) 5:32:28 PM #9 Text 0 File DlgWaitCD.cpp, Line 245 Write in overburning mode: FALSE 5:32:28 PM #10 Text 0 File DlgWaitCD.cpp, Line 2085 Recorder: _NEC DVD+RW ND-1100A, Media type: DVD+R 5:32:28 PM #11 Text 0 File DlgWaitCD.cpp, Line 406 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:32:28 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [_NEC DVD+RW ND-1100A ] -------------------------------------------------------------- 5:32:28 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [_NEC DVD+RW ND-1100A ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286112 | lead-out | 1 | 0x00 | 0x41 5:32:28 PM #14 Phase 24 File APIProgress.cpp, Line 253 Caching of files started 5:32:28 PM #15 Text 0 File Burncd.cpp, Line 4073 Cache writing successful. 5:32:28 PM #16 Phase 25 File APIProgress.cpp, Line 253 Caching of files completed 5:32:28 PM #17 Phase 36 File APIProgress.cpp, Line 253 Burn process started at 2.4x (3,324 KB/s) 5:32:28 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:32:28 PM #19 SCSI -1066 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x03035000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 5:32:28 PM #20 SCSI -1065 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x03036000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x20 0x00 5:32:28 PM #21 SCSI -1065 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x03036000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x20 0x00 5:32:28 PM #22 SCSI -1065 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 2, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 0x14 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x20 0x00 5:32:28 PM #23 Text 0 File DVDR.cpp, Line 4034 Drive: _NEC DVD+RW ND-1100A Book Type request: DVD-ROM Changing the book type was finish with error code: -1065 5:32:28 PM #24 Text 0 File DVDPlusRW.cpp, Line 564 Start write address at LBA 0 DVD high compatibility mode: Yes 5:55:48 PM #25 Text 0 File WriterStatus.cpp, Line 115 <_NEC DVD+RW ND-1100A > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks 5:55:49 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 5:55:59 PM #27 SCSI -1106 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 2, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 5:55:59 PM #28 SCSI -1176 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 2, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x03 5:55:59 PM #29 SCSI -1065 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x03035000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x20 0x00 5:55:59 PM #30 SCSI -1065 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 2, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 0x14 0xA1 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x20 0x00 5:55:59 PM #31 Text 0 File DVDR.cpp, Line 4034 Drive: _NEC DVD+RW ND-1100A Book Type request: none Changing the book type was finish with error code: -1065 5:55:59 PM #32 CDR -1106 File ThreadedTransferInterface.cpp, Line 1659 Power calibration error _NEC DVD+RW ND-1100A\H2 T1 5:55:59 PM #33 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1659 Could not perform end of Disc-at-once 5:56:04 PM #34 SCSI -1106 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 2, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 5:56:04 PM #35 SCSI -1176 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 2, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x03 5:56:04 PM #36 Phase 127 File APIProgress.cpp, Line 253 Generating DVD high compatibility borders 5:56:04 PM #37 SCSI -1065 File Cdrdrv.cpp, Line 1171 SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x03035000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 5:56:04 PM #42 Phase 38 File APIProgress.cpp, Line 253 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\CDUDF.SYS': Ver=5.3.5.10, size=363927 bytes, created 10/19/2003 11:39:48 AM File 'Drivers\CDR4_2K.SYS': Ver=5.3.5.10, size=58128 bytes, created 10/19/2003 11:39:48 AM File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 10/19/2003 11:39:48 AM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Further to my original post: I just discovered that my burner will recognize and load/play the disc I burned and got the error message from. The disc is not however recognizable on my DVD ROM drive in nmy PC and haven't tried it yet in a commercial stand alone dvd player. With apologies for being new to this, thanks.
Hello, I was reading a message you posted a few months back, about your dvd not closing your sessions. Were you able to figure out this issue, because I''m having the problem using DVDShrink and Nero. TIA
Physical memory : 255MB (261128kB) Free physical memory: 27MB (28008kB) it would help if you would close any programs running in the background, and no multitasking while burning.
this usually means el cheapo media try some different types, if the media is good,update the firmware and try not changing the book-type to dvd-rom
Yup the previous poster hit the nail on the head. My problem was the media. I was using Memorex discs that a large electronics chain store had on special here. When I went shopping at a local wholsaler I was able to buy better media for less money (in bulk) and solved my problem. It's worth reading through the guides on media and becoming an informed consumer. It sure is fun watching the price floors on D5 media collapse
