hey my xecuter 2.3b lite used to work, but i broke the switch and wire that connects the switch to the wire and it took me forever to get these items. now when i try to screw the xapter down, it won't stay screwed down because i stripped the screw hole. if i just let the xapter sit there, then it starts up normally, but if i manually push the xapter down onto the lpc ports, the box turns on and off twice then frags. i'm not positive if the chip is on because i broke off the led light on it, but the led on the switch doesn't come on. but i mean, the chip has to be affecting the box for it to frag right? any idea of what i can do?