hi, have a eurovox max 2006, have reset factory settings, done full powerscan, have just under 200 channels but cant get itv, channel 4 or crime & investigation. could anyone tell me the frequencies to search? i'm in the midlands area, so central or anglia would be great. thanks jane
You can find these channels all on freq 315.000 To add these go to menu,installation,user installation and use the on button guide to add frequencies ( Green / Channel Edit , Red / Add Freq ). For any frequency that you want to manually scan you select it in your list first by pressing OK when it is highlighted, ( a tick will appear beside the one you select), then you press the blue button to manually scan that frequency.
thank you for the quick reply, will try that in a few mins and let you know how it goes. thanks once again.
tried your sugestion a couple of times,but it doesnt find any channels on frequency 315. all the frequencies seem to go up in 8's, so tried 323 , 331, but all were showing a red bar, so signal wasnt strong enough..?/ did try a few lower aswell, still nothing. once i'd given up and tried to watch the tv i'd lost most of the channels that i had before, so now am doing another factory reset. do you know anymore frecency numbers i could try? thanks once again jane
The signal could be weak , are you running this from the main feed or a splitter ? What area and provider are you using (Ex N*L , TW , C&W )
its coming from the main feed, on N#L or now called virgin. i dont know if this helps but when do a full powerscan it doesnt list any channels till it gets to 338mhz. its just missing these couple of channels. dont know what else to try.
OK you need to go to menu, config, clear data and then clear channel data. Then do a normal powerscan from 200.000 to 800.000 using symbol rate 6887 N*L
ah, we do have our broadband line coming out of the n#l box in the wall, does this mean its a splitter? am in northamptonshire if this is any help. thanks
thanks celtic but have already tried that. get the same results everytime. just under 200 channels, at least 20 of them are blank screens. when doing a manual scan on freqency 315 it only takes a few seconds, and percentace is low, and in red. it doesnt find anything under that freqency. wonder if n#l have changed it lately?