HELP!!!! People my box has gone off and seems completley void of power.I have checked the fuse and also tried it with a different lead but there are no lights coming on at all! any advise would be great.
Hi Folks Few channels have been scrambled on my eurovos ex 1000 sl. mainly man united tv, Liverpool tv and celtic tv anything i can do to get these back. Liverpool tv not important but other 2 are
Read this mate >> http://forums.afterdawn.com/thread_view.cfm/757514 Also this >> http://forums.afterdawn.com/thread_view.cfm/756621
Cheers Hi Tech !! I will read it and absorb.If the c14 cap needs changing is it just a case of taking off the old one with a soldering iron and then on with the new ?
Yes very easy to do, undo the four screws, unplug the feed to the mobo, unplug the feed from the mains on the PSU and lift out. Make sure you get the polarity the right way round, line the arrow / line on the cap with the marker on the board .
Hi Tech ! Just a quick note to thank you for your knowledge ! I got my c14 cap 37p @ maplins followed your instructions and hey presto.....back up and running.If I could just ask if you know what STEP means when doing the power scan? it scrolls from 6-7-8 and wondered what difference it makes to the scan? I can never get ss 1/2 or 3. I used the patch UFL MAX blue (30/11/08)DnUpMan MFC App.and scan @ 6.952 from 100hz- to the other figure. Any light shed again would be appreciated.
Its the frequency scan/jump rate, make sure you remove any splitters when doing the initial scan or you could try changing the step to 6 to see if that help.
howyeh everyone Does anyone have this problem?? for the last few nights, I havent had any of the sky movie channels, the setanta sport channels 1,2, setanta golf, liverpool tv, celtic tv, attheraces, espn america.. and sky sports 1,2,3 & extra on me Eurovox blue any 1 have the same problem and would it be somthing to do with the frequencys or what? hope somthing comes up bout it cheers
I have had same problem with SS 1 & 2 etc and still have but not with the movies.Are you using the latest firmware? check with the site to download the latest and re-scan at your usual frequency.My latest firmware is dated 30/11/08 and available on this site.