I just recently started burning dvd's with nero and everything was working fine untill a few days ago when I started getting write errors on every disc. can someone tell me what is going on? here is my error log; AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523564kB) Free physical memory: 320MB (327816kB) Memory in use : 37 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.3.2005 ===== Disc-Copy over image - 1st step : Copy to image ... 10:57:49 AM #1 Text 0 File Reader.cpp, Line 127 Reader running 10:57:49 AM #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 10:57:49 AM #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2164737 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 10:57:49 AM #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 2164737 = 2164737, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 10:57:49 AM #5 Text 0 File Burncd.cpp, Line 3155 Turn on Disc-at-once, using DVD media 10:57:49 AM #6 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 2621439 (582:32.39, 5119MB) Last address to be written: 2164736 (481:03.11, 4228MB) 10:57:49 AM #7 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO 10:57:49 AM #8 Text 0 File DlgWaitCD.cpp, Line 2311 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 10:57:49 AM #9 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:57:49 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 829 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2164737 (2164737) = #2164737/481:3.12 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2164737 blocks [Image Recorder] -------------------------------------------------------------- 10:57:49 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4433381376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2164737 | lead-out | 1 | 0x41 | 0x00 10:57:49 AM #12 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 10:57:49 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2604 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:22:43 AM #14 Text 0 File WriterStatus.cpp, Line 116 < Image Recorder > start writing Lead-Out at LBA 2164737 (210801h), lenght 0 blocks 11:22:43 AM #15 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:22:45 AM #16 Phase 121 File dlgbrnst.cpp, Line 1832 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 11:23:05 AM #1 Text 0 File Reader.cpp, Line 127 Reader running 11:23:05 AM #2 Text 0 File Writer.cpp, Line 122 Writer HP DVD Writer 400c running 11:23:07 AM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4433381376 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=481:03.12 ( 2164737) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Administrator\Desktop\VIDEO_TS\TempImage.nrg> 11:23:08 AM #4 Text 0 File Burncd.cpp, Line 3155 Turn on Disc-at-once, using DVD media 12:05:58 PM #5 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2164736 (481:03.11, 4228MB) 12:05:58 PM #6 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO 12:05:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 2311 Recorder: HP DVD Writer 400c, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: F01, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 0 12:05:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.) 12:05:58 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 829 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 2164737 (2164737) = #2164737/481:3.12 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2164737 blocks [HP DVD Writer 400c] -------------------------------------------------------------- 12:05:58 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1042 Prepare recorder [HP DVD Writer 400c] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4433381376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2164737 | lead-out | 1 | 0x41 | 0x00 12:05:59 PM #11 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 12:05:59 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2604 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:05:59 PM #13 Text 0 File Cdrdrv.cpp, Line 8332 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: CMC.MAG. Media type ID: F01 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 00 43 4D 43 20 4D - 41 47 00 46 30 31 01 38 ...CMC.MAG.F01.8 23 54 37 14 02 3C 71 02 - 8C 64 16 16 0C 0B 09 09 #T7..<q..d...... 01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................ 12:05:59 PM #14 Text 0 File DVDPlusRW.cpp, Line 615 Start write address at LBA 0 DVD high compatibility mode: Yes 12:09:42 PM #15 SCSI -1135 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x03220000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x03 0xDE 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 12:09:42 PM #16 CDR -1135 File Writer.cpp, Line 311 Write error 12:09:43 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:09:46 PM #18 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:09:53 PM #19 SCSI -1135 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 3, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 12:09:53 PM #20 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 12:09:59 PM #21 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 12:09:59 PM #22 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 1/25/2005 5:26:38 PM File 'Drivers\PXHELP20.SYS': Ver=2.02.51a, size=17136 bytes, created 5/2/2003 10:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Have you updated nero? http://ww2.nero.com/us/Support_News_Service_Pack_2_Inquiries.html Let me know.
I have tried 4 brands of media. I can't get any 8X media to work for me. and it's hard to find any 4x in retail anymore. It's just wierd that the kind I have been using (4x kypermedia) worked perfect for 15-20 discs and all of a sudden none of them work.
