This is my log file: here is my log file, help me out please ANYONE Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero Version: 6.6.0.6 Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04 - HA 2 TA 0 - 6.6.0.6 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <_NEC DVD_RW ND-3520A >Version: 1.04 - HA 2 TA 0 - 6.6.0.6 Adapter driver: <> HA 2 === Scsi-Device-Map === DiskPeripheral : WDC WD400BB-75FJA1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TEAC CD-W224E atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TEAC CD-W224E D: CDRom0 _NEC DVD_RW ND-3520A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 509MB (522224kB) Free physical memory: 198MB (203668kB) Memory in use : 60 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.2.2005 UDF/ISO compilation 1:52:05 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 1:52:05 AM #2 DVDREALLOC -24 File DVDVideoCompilation.cpp, Line 1183 One or more files (mostly VOB file(s)) do not belong to the corresponding IFO file 1:52:05 AM #3 Phase 115 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation failed 1:52:12 AM #4 Phase 132 File dlgbrnst.cpp, Line 1832 DVD-Video files compliance ignored 1:52:12 AM #5 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 1:52:12 AM #6 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 1:52:12 AM #7 Text 0 File Reader.cpp, Line 127 Reader running 1:52:12 AM #8 Text 0 File Writer.cpp, Line 122 Writer _NEC DVD_RW ND-3520A running 1:52:12 AM #9 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 1:52:12 AM #10 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 1:52:12 AM #11 Text 0 File Burncd.cpp, Line 3155 Turn on Disc-at-once, using DVD media 1:52:12 AM #12 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2253295 (500:43.70, 4400MB) 1:52:12 AM #13 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO (enabled: CD) 1:52:12 AM #14 Text 0 File DlgWaitCD.cpp, Line 2311 Recorder: _NEC DVD_RW ND-3520A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 1:52:12 AM #15 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:52:12 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 829 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2253296 (2253296) = #2253296/500:43.71 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2253296 blocks [_NEC DVD_RW ND-3520A] -------------------------------------------------------------- 1:52:12 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1042 Prepare recorder [_NEC DVD_RW ND-3520A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4614750208, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2253296 | lead-out | 1 | 0x41 | 0x00 1:52:13 AM #18 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 1:52:13 AM #19 Text 0 File Burncd.cpp, Line 4042 Cache writing successful. 1:52:13 AM #20 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 1:52:14 AM #21 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2x (2,770 KB/s) 1:52:14 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2604 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 1:52:14 AM #23 Text 0 File DVDR.cpp, Line 2300 Recording mode: Sequential Recording Mode 1:52:14 AM #24 Text 0 File Mmc.cpp, Line 21079 Set BUFE: Buffer underrun protection -> ON 1:52:14 AM #25 Text 0 File DVDR.cpp, Line 2441 Start write address at LBA 0 DVD high compatibility mode: Yes 1:52:14 AM #26 Text 0 File Cdrdrv.cpp, Line 8332 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 1:52:14 AM #27 Text 0 File DVDR.cpp, Line 5970 Book Type counter: 500, Book Type selected in EEPROM, command version 2 1:52:14 AM #28 Text 0 File DVDR.cpp, Line 5970 Book Type counter: 500, Book Type selected in EEPROM, command version 2 1:52:14 AM #29 Text 0 File DVDR.cpp, Line 5970 Book Type counter: 500, Book Type selected in EEPROM, command version 2 1:52:14 AM #30 Text 0 File DVDR.cpp, Line 5094 Drive: _NEC DVD_RW ND-3520A Book Type request [NEC]: DVD-ROM Book Type setting not supported for the loaded disc type Changing the Book Type was finished with error, return code -4 1:52:16 AM #31 Text 0 File Cdrdrv.cpp, Line 1284 01:52:16.312 - _NEC DVD_RW ND-3520A\H2 T0 : Queue again later 1:52:18 AM #32 SCSI -500 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03E20000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 1:52:19 AM #33 SCSI -1114 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x045D1A00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x29 0x00 1:52:19 AM #34 CDR -1114 File Writer.cpp, Line 311 Reset occurred 1:52:19 AM #35 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:52:19 AM #36 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 1:52:19 AM #37 Text 0 File DVDR.cpp, Line 2682 EndDAO: Last written address was -1 1:52:19 AM #38 Text 0 File DVDR.cpp, Line 5970 Book Type counter: 500, Book Type selected in EEPROM, command version 2 1:52:19 AM #39 Text 0 File DVDR.cpp, Line 5970 Book Type counter: 500, Book Type selected in EEPROM, command version 2 1:52:19 AM #40 Text 0 File DVDR.cpp, Line 5094 Drive: _NEC DVD_RW ND-3520A Book Type request [NEC]: DVD-ROM Book Type setting not supported for the loaded disc type Changing the Book Type was finished with error, return code -4 1:52:19 AM #41 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 5:02:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Im using Panasonic DVD-R discs im trying to burn .vob/.bup/.ifo files ........ basicly just a direct copy of the dvd........ i used dvd decypher (latest version) and DVD Shrink (latest version) somone PLEASE help
i am not an expert on these logs,but it looks like to me the nec is not recoginizing the dvd-r media type you are using. i know you said you are using panasonic dvd-r but they are made by cmc(see your log for info) cmc id code is a poor quality media try changing your media,try using dvd+r or update your firmware,i am not sure you have latest version or not with kind regards hursty
how do i update my firmwire?? any other tips on why this may not be working?? just last week i burned DVD+R discs no problem....... i decided to go with DVD-R just cuz somone told me they work better or somthing. can anyone assist me with ANYTHING?
there is your answer then,it will not recoginize the dvd-r you are using. this does not mean it will not recoginize ANY dvd-r,just the ones that your using who told you that?if dvd+r works,then use them,there is no real difference. updating your firmware may allow your nec burner to deal the the panasonic(cmc)disc;s you are using. just search for the latest firmware version for your burner on the nec websit.make sure you get the EXACT correct version,or you could fry the writer!! download this link for the dvd identifier,it is useful in determing who made the blank disc's,in case you run into anymore problems. http://dvd.identifier.cdfreaks.com/ with kind regards hursty
