help sagem d box!! please help

Dunxs1 · Apr 16, 2008

Got mine fixed here -----http://www.dbox2repair.co.uk/
Hope this doesn't break any rules,did a great service for me as i'm not technical, but doesn't live too far from me so was very convenient to drop box off.

Brother29 · Apr 17, 2008

Dunxs1 said:

Thanx, just had new software put on by slayer on ebay and all working fine now. Woooo hoo. Dropped the box in and picked it up an hour later all working- thats service.
Not sure if it's ok to put links to websites on here? some forums don't like it.
Click to expand...

Brother29 · Apr 17, 2008

Thank Dunxsi sorry to have put you in an awkard position.

Brother29 · Apr 17, 2008

Sorry for being a pain but has anyone sorted there dbox out while on Virgin in the westmidlands. Also I have got the keys from WWW.finallygotone.com 00:86-77-c3-84-dd-68-af-34 & 01:9a-2d-65-86-ie-30-0f-5d Could someone tell me which one is the Virgin one and where do you enter it as all this tcno is doing a bit of dammage up top. sorry once again for being such a dimwit.

Dunxs1 · Apr 17, 2008

No problem. Have had Andromeda 2 on for a few days now, solid. much better than commando6- no stuttering or freezing pic at all, its the dogs. I just hope it stays that way 80)
Dunx.

Dunxs1 · Apr 17, 2008

Doh. Spoke too soon, all gone off again.
Dunx.

emmbob · Apr 17, 2008

zappp64 said:

1. Press the blue button and you will be in the features menu, scroll to Tuxbox Commander, press OK.

You should now be looking at the files on the D Box.

2. Scroll to VAR and press ok, If you don’t see VAR, scroll to <DIR> & press ok, if you still don’t see VAR scroll to the next <DIR> and press ok, keep doing this until VAR appears on the screen

3. When you find the VAR file and you press OK, scroll to Keys & press OK

4. Scroll to Keylist.txt and press 4 on your remote control! It is important that you don’t press OK when you scroll to keylist.txt , you must press 4 in order to edit the code that will appear! If you pressed OK in error , just press the Home button and start again.

5. After pressing 4 you should be looking at a screen with /var/keys/keylist.txt at the top, lines of code in the middle and numbers 1 to 9 at the bottom.

you should see two or more lines of code, the ones below are examples of what you need to edit

N 5401 00 xxxxxxxxxxxxxxxx; ROM10 AU Key Time Wed Apr 9 19:01:33 2008 (key 0 goes here - date,time will vary )
N 5401 01 xxxxxxxxxxxxxxx ; ROM10 AU Key Time Wed Apr 9 18:41:16 2008 (key 1 goes here - date,time will vary)

6. Now you need to scroll to the code that you are going to change.

7. When you have have scrolled to code you want to change press OK, When you press OK, the code becomes slightly larger and the first digit changes colour to red, this is now your cursor! move the cursor to Characters to be changed (x's – remember which key goes where) and (using the remote key pad like a mobile phone keypad , ie button 1 for 1 , 2 for abc2 , 3 for def3 etc) change the keys to the new ones then press ok , then press the home button , press red to save - do this twice till you see a list of files again.

Change the access rights of the keylist.txt using button 1 when keylist.txt highlighted a popup window appear , use up key to highlight (box around) write ,then press ok (green box to right of write will change to red) use down to highlight ok then press ok (the keylist.txt will now be green in colour - this is now write protected an will stop any bad keys being picked up)
if you need to change numbers again, change the box back to green

Are you on Virgin Media or Telewest

Do you have the new codees to enter.
Click to expand...

hi ive inputted the codes that are on www.finallygotone.com and it changed nothing!! as far as i am aware i am on telewest in the edinburgh area could you tell me if there are different codes available? thanks in advance!

emmbob · Apr 17, 2008

zappp64 said:

1. Press the blue button and you will be in the features menu, scroll to Tuxbox Commander, press OK.

You should now be looking at the files on the D Box.

2. Scroll to VAR and press ok, If you don’t see VAR, scroll to <DIR> & press ok, if you still don’t see VAR scroll to the next <DIR> and press ok, keep doing this until VAR appears on the screen

3. When you find the VAR file and you press OK, scroll to Keys & press OK

4. Scroll to Keylist.txt and press 4 on your remote control! It is important that you don’t press OK when you scroll to keylist.txt , you must press 4 in order to edit the code that will appear! If you pressed OK in error , just press the Home button and start again.

5. After pressing 4 you should be looking at a screen with /var/keys/keylist.txt at the top, lines of code in the middle and numbers 1 to 9 at the bottom.

you should see two or more lines of code, the ones below are examples of what you need to edit

N 5401 00 xxxxxxxxxxxxxxxx; ROM10 AU Key Time Wed Apr 9 19:01:33 2008 (key 0 goes here - date,time will vary )
N 5401 01 xxxxxxxxxxxxxxx ; ROM10 AU Key Time Wed Apr 9 18:41:16 2008 (key 1 goes here - date,time will vary)

6. Now you need to scroll to the code that you are going to change.

7. When you have have scrolled to code you want to change press OK, When you press OK, the code becomes slightly larger and the first digit changes colour to red, this is now your cursor! move the cursor to Characters to be changed (x's – remember which key goes where) and (using the remote key pad like a mobile phone keypad , ie button 1 for 1 , 2 for abc2 , 3 for def3 etc) change the keys to the new ones then press ok , then press the home button , press red to save - do this twice till you see a list of files again.

Change the access rights of the keylist.txt using button 1 when keylist.txt highlighted a popup window appear , use up key to highlight (box around) write ,then press ok (green box to right of write will change to red) use down to highlight ok then press ok (the keylist.txt will now be green in colour - this is now write protected an will stop any bad keys being picked up)
if you need to change numbers again, change the box back to green

Are you on Virgin Media or Telewest

Do you have the new codees to enter.
Click to expand...

change that to virgin area not telewest sorry! thanks for help!

Brother29 · Apr 18, 2008

I put in all the new codes but the chanels have gone off again.
The Keylist.txt is still on green and will not let me back into change to the new codes. How do I get in to change the colour of the Keylist.txt.

emmbob · Apr 18, 2008

zappp64 said:

1. Press the blue button and you will be in the features menu, scroll to Tuxbox Commander, press OK.

You should now be looking at the files on the D Box.

2. Scroll to VAR and press ok, If you don’t see VAR, scroll to <DIR> & press ok, if you still don’t see VAR scroll to the next <DIR> and press ok, keep doing this until VAR appears on the screen

3. When you find the VAR file and you press OK, scroll to Keys & press OK

4. Scroll to Keylist.txt and press 4 on your remote control! It is important that you don’t press OK when you scroll to keylist.txt , you must press 4 in order to edit the code that will appear! If you pressed OK in error , just press the Home button and start again.

5. After pressing 4 you should be looking at a screen with /var/keys/keylist.txt at the top, lines of code in the middle and numbers 1 to 9 at the bottom.

you should see two or more lines of code, the ones below are examples of what you need to edit

N 5401 00 xxxxxxxxxxxxxxxx; ROM10 AU Key Time Wed Apr 9 19:01:33 2008 (key 0 goes here - date,time will vary )
N 5401 01 xxxxxxxxxxxxxxx ; ROM10 AU Key Time Wed Apr 9 18:41:16 2008 (key 1 goes here - date,time will vary)

6. Now you need to scroll to the code that you are going to change.

7. When you have have scrolled to code you want to change press OK, When you press OK, the code becomes slightly larger and the first digit changes colour to red, this is now your cursor! move the cursor to Characters to be changed (x's – remember which key goes where) and (using the remote key pad like a mobile phone keypad , ie button 1 for 1 , 2 for abc2 , 3 for def3 etc) change the keys to the new ones then press ok , then press the home button , press red to save - do this twice till you see a list of files again.

Change the access rights of the keylist.txt using button 1 when keylist.txt highlighted a popup window appear , use up key to highlight (box around) write ,then press ok (green box to right of write will change to red) use down to highlight ok then press ok (the keylist.txt will now be green in colour - this is now write protected an will stop any bad keys being picked up)
if you need to change numbers again, change the box back to green

Are you on Virgin Media or Telewest

Do you have the new codees to enter.
Click to expand...

hi could u tell me where to get codes please, i followed all the prevoius instructions on a manual update and managed that but the codes i inputted changed nothing so assume they were wrong codes for either my box type or area? thanks in advance

gazzman90 · May 25, 2008

Hello all, i seem to have lost all my chanels exept from terrestial and some basic cable channels. I have entered the latest keys from bigmac but still nothing. Any help would be greatly appreciated, gazzman

bigdunc · May 25, 2008

gazzman90 said:

Hello all, i seem to have lost all my chanels exept from terrestial and some basic cable channels. I have entered the latest keys from bigmac but still nothing. Any help would be greatly appreciated, gazzman
Click to expand...

Sack the keylist and change the Roms .....Paul

gazzman90 · May 27, 2008

Thanks, how exactly do i go about that? I could do with some sort of dummies guide where do you think i could get one of those? Cheers

bigdunc · May 27, 2008

Just Read back through the Previous threads
Its all there mate................Paul

Log in or Sign up

help sagem d box!! please help

Dunxs1 Member

Brother29 Member

Brother29 Member

Brother29 Member

Dunxs1 Member

Dunxs1 Member

emmbob Member

emmbob Member

Brother29 Member

emmbob Member

gazzman90 Member

bigdunc Regular member

gazzman90 Member

bigdunc Regular member

Share This Page

Log in or Sign up

help sagem d box!! please help

Dunxs1 Member

Brother29 Member

Brother29 Member

Brother29 Member

Dunxs1 Member

Dunxs1 Member

emmbob Member

emmbob Member

Brother29 Member

emmbob Member

gazzman90 Member

bigdunc Regular member

gazzman90 Member

bigdunc Regular member

Share This Page

Useful Searches