hey people my generic dvd burner was working great this days now everytime im trying to burn a DVD i get the error message- I/O error Sense Area:70 00 03 00 00 00 00 0A 00 00 00 00 73 02 00 00 00 00 Interpretationower calibration Area is full i've try to burn with nero, Dvd decrypter and they all give me the same error, can somebody help me??
Hey jborges 1st thing to check is your firmware up to date on the burner. What media are you using? Like Sony +R 16x. Firmware not up to date and/or poorer quality media would be the 1st 2 things to check for this & most burn errors. Can you post the rest of the Decrtpter log too?
4C82-0010-8011-0000-8682-6022-9274 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 10:54:32 AM NT-SPTI used Nero Version: 7.2.3.2 Internal Version: 7, 2, 3, 2 Recorder: <GENERIC DVD RW 12XMax> Version: 100i - HA 1 TA 0 - 7.2.3.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 1 - 7.2.3.2 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 0 DMA: On CdRomPeripheral : GENERIC DVD RW 12XMax atapi Port 1 ID 0 DMA: On CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off === CDRom-Device-Map === GENERIC DVD RW 12XMax E: CDRom0 SCSIVAX DVD/CD-ROM G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523764kB) Free physical memory: 52MB (53996kB) Memory in use : 89 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.2.2007 Gravar imagem do DVD 1:12:53 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 1:12:53 AM #2 Text 0 File Reader.cpp, Line 124 Reader running 1:12:53 AM #3 Text 0 File Writer.cpp, Line 113 Writer E: GENERIC DVD RW 12XMax running 1:12:53 AM #4 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 1:12:53 AM #5 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286023 (508:00.23, 4464MB) 1:12:53 AM #6 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 1:12:53 AM #7 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: GENERIC DVD RW 12XMax, Media type: DVD-R Disc Manufacturer: UME01 - Disc Application Code: 64, Disc Physical Code: 193 1:12:53 AM #8 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:12:53 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Modo 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2286024 (2286024) = #2286024/508:0.24 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286024 blocks [E: GENERIC DVD RW 12XMax] -------------------------------------------------------------- 1:12:53 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: GENERIC DVD RW 12XMax] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681777152, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286024 | lead-out | 1 | 0x41 | 0x00 1:12:53 AM #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 1:12:53 AM #12 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 1:12:53 AM #13 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 1:12:53 AM #14 Text 0 File Burncd.cpp, Line 4231 Cache writing successful. 1:12:53 AM #15 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 1:12:53 AM #16 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 1:12:53 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 1:12:53 AM #18 Text 0 File DVDR.cpp, Line 2869 Recording mode: Sequential Recording Mode for Multisession 1:12:53 AM #19 Text 0 File DVDR.cpp, Line 3025 Start write address at LBA 0 DVD high compatibility mode: Yes 1:12:53 AM #20 Text 0 File Cdrdrv.cpp, Line 8995 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 1:13:02 AM #21 SPTI -1015 File SCSIPassThrough.cpp, Line 291 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1015) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x02 CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 02 Buffer x04f20000: Len x10000 0x01 00 02 00 ED 00 00 00 B6 23 F0 01 20 00 00 00 0x00 00 00 00 00 00 00 00 08 42 55 53 5F 31 37 34 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1:13:02 AM #22 CDR -1015 File Writer.cpp, Line 302 Calibration area full E: GENERIC DVD RW 12XMax 1:13:02 AM #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:13:02 AM #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 1:13:03 AM #25 Text 0 File DVDR.cpp, Line 3265 EndDAO: Last written address was 31 1:13:03 AM #26 Phase 133 File dlgbrnst.cpp, Line 1730 Writing short lead-out 1:13:05 AM #27 SPTI -1015 File SCSIPassThrough.cpp, Line 291 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1015) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x02 CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 02 Buffer x0373b600: Len x20 1:13:05 AM #28 CDR -1015 File WriterStatus.cpp, Line 167 Calibration area full E: GENERIC DVD RW 12XMax 1:13:05 AM #29 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 1:13:05 AM #30 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 9:53:04 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 5/24/2006 4:48:03 PM (Prassi/Veritas driver for win 2K) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 11:59:41 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Thats the log i guess,the midia im using is the Playo Dvd-R 8x,i use this same midia before a bunch of times and that never happens, and my firmware up date i dont know how do i check that??
Ok - 1st thing let's edit out the serial # at the top of the log - begins w/ 4C. Don't need someone else using it. A bit of digging on your drive - looks like it's an I/O magic DD1203. The latest firmware is 120I - here's a link Physical memory : 511MB Free physical memory: 52MB Memory in use : 89 % A lot of memory in use too - free some up. No multi tasking and close any unneeded programs. If you haven't recently do a disc defrag, run a registry cleaner like ccleaner (use the cleaner & issues options) and run virus & spyware scans. Nero Version: 7.2.3.2 Nero can use an update too - may not be the problem but several fixes/enhancements since this version. Disc Manufacturer: UME01 UME made the Playo discs your using - not the best by far. Playo users different manufacturers so you never know who you might get. Better to use would be Verbatim, Taiyo Yuden or made in Japan Sony, Fuji or Maxell. Give that a go and let us know.
