I just got my DVD burner, LG 4163B, and I am using it for the first time. I have an DVD ISO image on my hard drive ready to burn. I have tried to burn it using Nero Express and Roxio and it craps out each time. Below is part of the Nero log. Near the bottom of the log I see a message about Book Type setting not supported. I am using TY 4X DVD-R media. What am I doing wrong. FYI, I run Windows 2k Pro. Thanks in advance for any help. ____________________________________________________________________ Windows 2000 5.0 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:35:32 AM Nero version: 6.6.0.5 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A102 - HA 2 TA 0 - 6.6.0.5 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <MATSHITA DVD-ROM SR-8174 >Version: C221 - HA 1 TA 0 - 6.6.0.5 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IBM-DARA-212000 atapi Port 0 ID 0 DMA: On CdRomPeripheral : MATSHITA DVD-ROM SR-8174 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === MATSHITA DVD-ROM SR-8174 D: CDRom0 HL-DT-ST DVDRAM GSA-4163 F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261616kB) Free physical memory: 70MB (72248kB) Memory in use : 72 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 20.4.2005 Burn DVD Image 10:41:04 AM #1 Text 0 File Reader.cpp, Line 127 Reader running 10:41:04 AM #2 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-4163B running 10:41:04 AM #3 Text 0 File Burncd.cpp, Line 3155 Turn on Disc-at-once, using DVD media 10:41:45 AM #4 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2238200 (497:22.50, 4371MB) 10:41:45 AM #5 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO (enabled: CD) 10:41:45 AM #6 Text 0 File DlgWaitCD.cpp, Line 2310 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: TYG01 - Disc Application Code: 64, Disc Physical Code: 193 10:41:45 AM #7 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R9 Double Layer.) 10:41:45 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 829 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2238351 (2238351) = #2238351/497:24.51 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2238351 blocks [HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 10:41:45 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1042 Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4584142848, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2238351 | lead-out | 1 | 0x41 | 0x00 10:41:45 AM #10 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:41:45 AM #11 Text 0 File Burncd.cpp, Line 4042 Cache writing successful. 10:41:45 AM #12 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:41:45 AM #13 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2x (2,770 KB/s) 10:41:45 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2604 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:41:45 AM #15 Text 0 File DVDR.cpp, Line 2260 Recording mode: Sequential Recording Mode 10:41:45 AM #16 Text 0 File Mmc.cpp, Line 21060 Set BUFE: Buffer underrun protection -> ON 10:41:45 AM #17 Text 0 File DVDR.cpp, Line 2401 Start write address at LBA 0 DVD high compatibility mode: Yes 10:41:45 AM #18 Text 0 File Cdrdrv.cpp, Line 8332 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:41:45 AM #19 Text 0 File DVDR.cpp, Line 4831 Drive: HL-DT-ST DVDRAM GSA-4163B Book Type request: DVD-ROM Book Type setting not supported for the loaded disc type 10:41:55 AM #20 SCSI -500 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x08B20000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 10:41:56 AM #21 SCSI -1114 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x08EC0A00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x0C 0x29 0x00 10:41:56 AM #22 CDR -1114 File Writer.cpp, Line 311 Reset occurred 10:41:56 AM #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:41:56 AM #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:41:56 AM #25 Text 0 File DVDR.cpp, Line 2642 EndDAO: Last written address was -1 10:41:56 AM #26 Text 0 File DVDR.cpp, Line 4831 Drive: HL-DT-ST DVDRAM GSA-4163B Book Type request: DVD+R Book Type setting not supported for the loaded disc type 10:41:56 AM #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\CDUDF.SYS': Ver=7.0.0.162 , size=284928 bytes, created 1/27/2004 4:40:26 PM File 'Drivers\CDR4_2K.SYS': Ver=7.0.0.162 , size=43008 bytes, created 1/27/2004 4:34:46 PM File 'Drivers\CDRALW2K.SYS': Ver=7.0.0.162 , size=24576 bytes, created 1/27/2004 4:32:00 PM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.02.27b, size=16000 bytes, created 8/25/2001 2:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 2:05:04 PM (Adapter driver for src)
Try using DVD Decrypter to burn and DVD ISO file. What size is the ISO file? If it is bigger than 4.7 GB get DVD Shrink.
hi i think your problem is nero / roxio conflicting!!! they hate eachother... also when uninstalling roxio it causes more hassle as it doesnt remove itself! you need roxio zapper from them to remove it! but as said dvd decrypter a free app will burn iso (dam amazing app!)
The file size is 4.2G so that is not a problem. I have DVDDecrypter, but I did not see how to select an ISO image as input. I do not want to use a daemon tool to mount if not necessary. Also, I think there must be some basic problem that both Nero and Roxio failed.
I only installed the Nero Express after Roxio failed. So, not sure if it was a conflict with the two products. At least at first.
theres your prob, roxio sucks and then it killed any chance or nero giving a shot! also the file may need ripping to hd! as the booktype thing may be its a +R going to a -R (not sure - dont quote me on that?)
the iso image is on my hard drive. i am tying dvddecrypter now and running in test mode, but still getting an error. question. my iso image is on an ntfs external drive. my main hard drive is still fat32. it is an older machine that only has 10G capacity. would that create any problems.
Kill all unneed processes. Try creating an addtional DVD image from a different disc and see if you get the same error. What are the specs on your computer?
i am running on an old ibm thinkpad t20. it has 10g hard drive, 256k ram, intel p3 processor. i have an attached 120g external usb 2 drive and now a usb 2.0 dvd writer.
nope, i only have around 3 gigs or so. i was wondering if that could be a problem. i will delete some stuff and see what happens.
to be clear, i only have around 3-4 gigs available on the laptop hd, the external hd has around 50 gigs free. i am configuring the burner software so the temp files go to the external. i assume that should be ok.
I too have just recently purchased a LG GSA-4163B, and am unable to burn with Ritek G-05's and Verbatim DataLifePlus(s/n 94854), both are 8X DVD-R InkJet Printable, and neither work. I did however have a friend give me a couple 4X DVD+R Memorex, and those worked just fine. From what I've seen with all of my friends burners and the rest of the burners we have at work, Verbatim has been the most highly compatible. I have the latest firmware (A104). Any ideas? All of your help is much appreciated. Sgt Parker Headquarters Kosovo Forces USMC
i am using usb 2.0. one other question. the iso image i am trying to burn is 4.2 gig. again, it is on the external hd which is ntfs. does it make any difference when i try to burn this sucker if my laptop hd is still fat32. the laptop hd has around 5 gig of freespace on it now.
