help !

Discussion in 'Nero discussion' started by eatrebi, Jun 21, 2006.

  1. eatrebi

    eatrebi Member

    Joined:
    Jun 21, 2006
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    ok so i bought this dynex drive http://www.dealtree.net/cart/select_item.cfm?cont=69692 off ebay and it refuses to burn anything. not even cd's.. i have a sony vaio pcv-rx560, little old but reliable so far.. i had two drives, a pioneer dvd rom drive and a crappy sony crx175 cd-rw that wasnt burning either so i replaced it with this one. i set this new drive as master and the pioneer as slave. updated the firmware, uninstalled nero, ran the clean tool, rebooted a couple of times until it cleared all of the entries off.. reinstalled the 7082 so-said reliable version and it still doesnt burn anything. i downloaded the liveupdate tool nero actually runs the project and says burn was successful.. but theres nothing on the cd.. i checked on my friends laptop just to make sure but they were all empty. im not even trying with dvd burning because as soon as i put in a dvd it freezes up nero all together. given that i only have 256 mb's of ram.. i thought it would be a little slow to burn but not completely disastrous like this...

    please if anybody has any hints on anything i could be doing to fix this, i would greatly appreciate it.. or if maybe i should send it back to ebay and ask for a refund..

    here's my nero history log:
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.8.2
    Internal Version: 7, 0, 8, 2
    (Nero Express)
    Recorder: <DVDRW IDE 16X> Version: A091 - HA 1 TA 0 - 7.0.8.2
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 1 - 7.0.8.2
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    DVDRW IDE 16X E: CDRom0
    PIONEER DVD-ROM DVD-117R F: CDRom1
    =======================

    AutoRun : 0
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    BUFE : 0
    Physical memory : 255MB (261664kB)
    Free physical memory: 125MB (128124kB)
    Memory in use : 51
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    21.6.2006
    CD-ROM (ISO)
    1:49:41 PM #1 Text 0 File Isodoc.cpp, Line 6423
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    1:49:42 PM #2 Text 0 File Burncd.cpp, Line 3056
    DVDRW IDE 16X
    Super Link activated

    1:49:42 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 39936KB of Memory

    1:49:42 PM #4 Text 0 File Reader.cpp, Line 124
    Reader running

    1:49:42 PM #5 Text 0 File Writer.cpp, Line 113
    Writer E: DVDRW IDE 16X running

    1:49:42 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    1:49:42 PM #7 Text 0 File Burncd.cpp, Line 3353
    Turn on Track-At-Once, using CD-R/RW media

    1:49:42 PM #8 Text 0 File DlgWaitCD.cpp, Line 289
    Last possible write address on media: 359848 ( 79:59.73)
    Last address to be written: 358079 ( 79:36.29)

    1:49:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 301
    Write in overburning mode: NO (enabled: CD)

    1:49:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715
    Recorder: DVDRW IDE 16X

    1:49:42 PM #11 Text 0 File DlgWaitCD.cpp, Line 473
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    1:49:42 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 358080 (358080) = #358080/79:34.30
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358078 blocks [E: DVDRW IDE 16X]
    --------------------------------------------------------------

    1:49:42 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [E: DVDRW IDE 16X] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 733655040, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    -150 | lead-in | 0 | 0x41 | 0x00
    -150 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    358080 | lead-out | 1 | 0x41 | 0x00

    1:49:42 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
    Removed 2 run-out blocks from end of track 1. Length: 358080 -> 358078.

    1:49:42 PM #15 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    1:49:42 PM #16 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    1:49:42 PM #17 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    1:49:42 PM #18 Text 0 File Burncd.cpp, Line 4187
    Cache writing successful.

    1:49:42 PM #19 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    1:49:42 PM #20 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 16x (2,400 KB/s)

    1:49:42 PM #21 SPTI -1189 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x02
    CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02
    Buffer x04b79200: Len x4000

    1:49:42 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2707
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    1:49:42 PM #23 Text 0 File MMC.cpp, Line 21893
    Set BUFE: Super Link -> ON

    1:54:54 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    1:54:58 PM #25 Text 0 File MMC.cpp, Line 16661
    start Close Session

    1:55:54 PM #26 Phase 37 File dlgbrnst.cpp, Line 1730
    Burn process completed successfully at 16x (2,400 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=3.00.15B, size=46080 bytes, created 2/13/2006 1:00:00 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======
    Ehab
    At Home
    Nero Serial Removed

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.8.2
    Internal Version: 7, 0, 8, 2

    Recorder: <DVDRW IDE 16X> Version: A091 - HA 1 TA 0 - 7.0.8.2
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 1 - 7.0.8.2
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    DVDRW IDE 16X E: CDRom0
    PIONEER DVD-ROM DVD-117R F: CDRom1
    =======================

    AutoRun : 0
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    BUFE : 0
    Physical memory : 255MB (261664kB)
    Free physical memory: 105MB (108124kB)
    Memory in use : 58
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    21.6.2006
    CD-ROM (ISO)
    2:00:17 PM #1 Text 0 File Isodoc.cpp, Line 6423
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    2:00:17 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 39936KB of Memory

    2:00:17 PM #3 Text 0 File Reader.cpp, Line 124
    Reader running

    2:00:17 PM #4 Text 0 File Writer.cpp, Line 113
    Writer E: DVDRW IDE 16X running

    2:00:17 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    2:00:17 PM #6 Text 0 File Burncd.cpp, Line 3353
    Turn on Track-At-Once, using CD-R/RW media

    2:00:17 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
    Last possible write address on media: 359848 ( 79:59.73)
    Last address to be written: 358079 ( 79:36.29)

    2:00:17 PM #8 Text 0 File DlgWaitCD.cpp, Line 301
    Write in overburning mode: NO (enabled: CD)

    2:00:17 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715
    Recorder: DVDRW IDE 16X

    2:00:17 PM #10 Text 0 File DlgWaitCD.cpp, Line 473
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    2:00:17 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 358080 (358080) = #358080/79:34.30
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358078 blocks [E: DVDRW IDE 16X]
    --------------------------------------------------------------

    2:00:17 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [E: DVDRW IDE 16X] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 733655040, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    -150 | lead-in | 0 | 0x41 | 0x00
    -150 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    358080 | lead-out | 1 | 0x41 | 0x00

    2:00:17 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1127
    Removed 2 run-out blocks from end of track 1. Length: 358080 -> 358078.

    2:00:17 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    2:00:17 PM #15 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    2:00:17 PM #16 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    2:00:17 PM #17 Text 0 File Burncd.cpp, Line 4187
    Cache writing successful.

    2:00:17 PM #18 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    2:00:17 PM #19 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 32x (4,800 KB/s)

    2:00:17 PM #20 SPTI -1189 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x02
    CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02
    Buffer x051a1c00: Len x4000

    2:00:17 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2707
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    2:00:17 PM #22 Text 0 File MMC.cpp, Line 21893
    Set BUFE: Super Link -> OFF

    2:03:15 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    2:03:20 PM #24 Text 0 File MMC.cpp, Line 16661
    start Close Session

    2:04:00 PM #25 Phase 37 File dlgbrnst.cpp, Line 1730
    Burn process completed successfully at 32x (4,800 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=3.00.15B, size=46080 bytes, created 2/13/2006 1:00:00 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======
     
    eatrebi, Jun 21, 2006
    #1
  2. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116
    Last edited: Jun 21, 2006
    gwendolin, Jun 21, 2006
    #2
  3. eatrebi

    eatrebi Member

    Joined:
    Jun 21, 2006
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    sony cd-r's and memorex dvd-r
     
    eatrebi, Jun 21, 2006
    #3
  4. eatrebi

    eatrebi Member

    Joined:
    Jun 21, 2006
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    here's one more log of a failed burn, if it makes any difference:

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.8.2
    Internal Version: 7, 0, 8, 2
    (Nero Express)
    Recorder: <DVDRW IDE 16X> Version: A091 - HA 1 TA 0 - 7.0.8.2
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 1 - 7.0.8.2
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    DVDRW IDE 16X E: CDRom0
    PIONEER DVD-ROM DVD-117R F: CDRom1
    =======================

    AutoRun : 0
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    BUFE : 0
    Physical memory : 255MB (261664kB)
    Free physical memory: 39MB (40692kB)
    Memory in use : 84 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    21.6.2006
    CD-ROM (ISO)
    12:58:03 PM #1 Text 0 File Isodoc.cpp, Line 6423
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    12:58:03 PM #2 Text 0 File Burncd.cpp, Line 3056
    DVDRW IDE 16X
    Super Link activated

    12:58:03 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 39936KB of Memory

    12:58:03 PM #4 Text 0 File Reader.cpp, Line 124
    Reader running

    12:58:03 PM #5 Text 0 File Writer.cpp, Line 113
    Writer E: DVDRW IDE 16X running

    12:58:03 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    12:58:03 PM #7 Text 0 File Burncd.cpp, Line 3353
    Turn on Track-At-Once, using CD-R/RW media

    12:58:03 PM #8 Text 0 File DlgWaitCD.cpp, Line 289
    Last possible write address on media: 359848 ( 79:59.73)
    Last address to be written: 358079 ( 79:36.29)

    12:58:03 PM #9 Text 0 File DlgWaitCD.cpp, Line 301
    Write in overburning mode: NO (enabled: CD)

    12:58:03 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715
    Recorder: DVDRW IDE 16X

    12:58:03 PM #11 Text 0 File DlgWaitCD.cpp, Line 473
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:58:03 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 358080 (358080) = #358080/79:34.30
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358078 blocks [E: DVDRW IDE 16X]
    --------------------------------------------------------------

    12:58:03 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [E: DVDRW IDE 16X] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 733655040, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    -150 | lead-in | 0 | 0x41 | 0x00
    -150 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    358080 | lead-out | 1 | 0x41 | 0x00

    12:58:03 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
    Removed 2 run-out blocks from end of track 1. Length: 358080 -> 358078.

    12:58:03 PM #15 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    12:58:03 PM #16 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    12:58:03 PM #17 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    12:58:03 PM #18 Text 0 File Burncd.cpp, Line 4187
    Cache writing successful.

    12:58:03 PM #19 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    12:58:03 PM #20 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 48x (7,200 KB/s)

    12:58:03 PM #21 SPTI -1189 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x02
    CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02
    Buffer x04b79200: Len x4000

    12:58:03 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2707
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:58:03 PM #23 Text 0 File MMC.cpp, Line 21893
    Set BUFE: Super Link -> ON

    12:58:43 PM #24 SPTI -1106 File SCSIPassThrough.cpp, Line 290
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
    Sense Key: 0x01 (KEY_RECOVERED_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x71 00 01 00 00 00 00 0A 00 00 00 00 73 03
    Buffer x06690000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    12:58:43 PM #25 CDR -1106 File Writer.cpp, Line 302
    Power calibration error
    E: DVDRW IDE 16X

    12:58:43 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    12:58:43 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    12:58:43 PM #28 CDR -201 File WriterStatus.cpp, Line 200
    Invalid write state
    E: DVDRW IDE 16X

    12:58:43 PM #29 TRANSFER -18 File WriterStatus.cpp, Line 200
    Could not perform EndTrack

    12:58:43 PM #30 Text 0 File MMC.cpp, Line 16661
    <DVDRW IDE 16X > start Close Session

    12:58:43 PM #31 Phase 38 File dlgbrnst.cpp, Line 1730
    Burn process failed at 48x (7,200 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=3.00.15B, size=46080 bytes, created 2/13/2006 1:00:00 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    eatrebi, Jun 21, 2006
    #4
  5. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116
    Sony are a good brand however memorex are horrible discs, try Verbatim or sony, heres a thread about memorex http://forums.afterdawn.com/thread_view.cfm/262544

    Burning too fast slow to 24X

    Heres something on this error

     
    Last edited: Jun 21, 2006
    gwendolin, Jun 21, 2006
    #5

Share This Page