sorry not very good at this, been told there new ones out today, uc our box went off earler and did not come back, ireland south
hi scOuser thanks very much i got there in the end. would you know how i could download version 4.00 please
Version 4 is only for a genuine box. You will need to know if you have a clone or genuine Please click the SV EV Info link at the end of my post to compare clone V genuine boxes. You will need a null modem cable DB9F to DB9F. Null modem info http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6 If your pc does not have a serial port you will need a USB to serial port adapter to use in conjunction with the null modem cable. USB Adapter info http://www.maplin.co.uk/Module.aspx?Modu...erial Adaptor These two cable links are only for reference as they can be purchased alot cheaper on fleabay. All firmware/loader can be found in the link at the end of my post marked Eamos Library. You will need the GTromloader, (Starvi*w Software Uploader), found in the Starvi*w software folder of the link. You will need version 4.00 firmware for GENUINES found in "Starvi*w" firmware folder. You will need version 2.57_FIXED firmware for CLONES found in "Starvi*w" firmware folder. Updating Firmware Connect your box and PC with a Null modem cable and switch on the cable box and put it on STANDBY. (The Starview does not need to be connected to TV to update it with GTROM) Open GTROM Loader software make sure that you set the correct COM PORT that matches the one that is being used Make sure App file only is selected, then click Bin File & browse to the firmware where you downloaded it to on your PC. Run the GTROM loader by pressing Download and you will see the % progress increase then Download completed message on your PC.