Hotswap question, please help!

go to settings what do you see in there?

 

which hdd does he have? is it lock? (these are just questions)

 

on the bios version it says: evox m7 and on security it says unlock error and all the drives (c, e, f, g, x, y, z are on 0)

 

ON the clock it also says JUmp to Ms Dash: NO, do i put yes?

 

All drive are 0. Listen to hdd to see if it spins. Something happened to hdd.

In the settings, do you see IP addess any where? if so, do ftp and try to access into drives.

 

All the partitions on hdd is wiped out. Do worry about how to set in the settings. Just read what it says.

 

There is and ip adress and the static ip:NO. i tried to ftp and i put yes to static ip and i rebooted xbox, but it goes back to yes. What do i do?

 

I mean it goes back to no, what do i do?

 

you cant change anything in the settings now. Just use the IP address that it gave to you.

 

I'm trying to use the ip: 192.168.1.200, but my flashfxp doesnt detect it, is it because on the static ip it says no?

 

well if you can't ftp, then it is ok.

Which disk that he used to install dashboard on this xbox before?
Do you have a spare hdd 8GB or above?

 

He used xbox-board, and it's just a normal western digital hdd.

 

Do you have a spare hdd 8GB or above?
Otherwise I have to format this hdd.

 

if you have a spare hdd, put it in xbox. turn on xbox. If you don't have it is ok.

1)Reset/Reboot 2)Save BIOS/EEPROM (xbox C:/backup) 3) New install/ full rebuild 4) apps/upgrades/lock/format 5)eeprom/flash mod chip or xbox tsop 6)Identify your bios/mod chip 8) system settings 9) turn off xbox

Choose 4 to format
then choose 3 to install dashboard.

 

OH ok, so i have to format it before i install dashboard?

 

there's two options on 4. 4a: inst/upg xbmc(p), msdash, apps and evox + 3935. and 4B: any hard drvie lock/ unlock and format

 

go to format

 

when you are done with format, tell me what are in option 3.

 

ok i pressed on format and now theres two, 4b1: lock/unlock, 4b2 format hard drive/restore retail

 

just go all the way and format. If you have the big hdd, then format upgrade hdd, if you have stock hdd, then format stock hdd.

Then go the option 3 to install everything.

I gotto go now.