1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

How do I enable automatic Burning with Nero 6.6.1.4 and Shrink 3.2.0.15

Discussion in 'Nero discussion' started by DrMac447, Mar 16, 2006.

  1. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Hi greety
    Here's a few more suggestions for you.

    Recorder: <LITE-ON DVDRW SHM-165H6S>Version: HS0D
    Update the firmware - the latest is HSOE.

    DiskPeripheral : WDC WD2000JB-55GVA0 08.0 nvidesm Port 0 ID 0 DMA: Off
    DiskPeripheral : WDC WD1200JB-00CRA1 17.0 nvidesm Port 0 ID 1 DMA: Off
    CdRomPeripheral : LITE-ON DVDRW SHM-165H6SHS0D nvidesm Port 0 ID 0 DMA: Off
    DiskPeripheral : IOMEGA ZIP 250 51.G nvidesm Port 0 ID 1 DMA: Off

    Check and make sure DMA is on for all drives. Nero doesn't report drives connected by anything other than ide correctly so this may not be a problem.
    Here's a guide to get you in the right direction - link.

    Burn process failed at 16x
    Take it down to 8x.

    Keep us posted - good, bad or otherwise.


    Hey Beatles74
    Good to hear you're having some success!
    Yeah the guides at ImgBurn are quite lengthy.

    You can set Shrink to autoburn w/ ImgBurn - just need to download a tweak for Shrink. Here's a link.
     
  2. AgentBlaq

    AgentBlaq Member

    Joined:
    Apr 27, 2007
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    I know this isn't the right section for this reply, but I just wanted to know if you guys know anything about the VIDEO_TS thing with VobBlanker? I have DVDFAB Decrypter, DVD FIXVTS, NERO, DVD Shrink, & IMG Burn. I can not figure out when I get done with DVDFAB what else needs to be done to burn a copy of a movie. The VobBlanker isn't finding what DVDFAB Decrypted.
     
  3. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    @AgentBlaq
    After you rip w/ DVDFab you might not need to run it thru VobBlanker. But only takes maybe 5 mins so can't hurt.
    You need to open the ifo file on the video_ts folder.

    Here's a guide for DVDFab, Vobblanker & Shrink - will give you details on how to use Vobblanker. link
     
  4. p00pie

    p00pie Member

    Joined:
    Apr 21, 2006
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    11
    ok guys, I know there is probably a real easy solution to this problem, but I am currently stumped.

    I had to load all my backup software on a new machine and now I am having issues with autoburn in my shrink.

    I am using dvd shrink 3.2.0.15
    ripit4me 1.7.1.0
    and decrypter 3.5.4.0
    nero oem suit 6.3.1.11

    on my old machine, I never had a problem but on my new one I can't get autoburn to work.

    The only other issue I can guess at is that my new machine was preloaded with sonic.

    Any Ideas?
     
  5. garmoon

    garmoon Regular member

    Joined:
    Oct 7, 2004
    Messages:
    4,841
    Likes Received:
    0
    Trophy Points:
    46
    To Go Back To Nero 6.6.0.18

    Write down your nero serial# and then uninstall version 6.6.1.4 from your system using the general cleantool found here:

    http://ww2.nero.com/nero6/enu/General_CleanTool.html

    After using the clean tool you might want to use a registry cleaner like ccleaner which is free here:

    http://www.ccleaner.com/download/downloadpage.aspx?1

    Then defrag your HDD

    Next, download and install version 6.6.0.18 from the links provided, re-enter the serial# and you're good to go.

    nero version 6.6.0.18 updates:
    Package 1
    http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe

    Package 2
    http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe

    Do NOT install InCD just the 2 above packages.

    New Links
    Package 1:
    http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe
    Package 2:
    http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe

    Now you should be able to autoburn with Nero
     
  6. wolfniggr

    wolfniggr Regular member

    Joined:
    Dec 15, 2004
    Messages:
    1,080
    Likes Received:
    0
    Trophy Points:
    46
    FYI, the latest Nero6 update (6.6.1.15a) available since March 21st once again allows DVD Shrink to burn using Nero.
     
  7. Coules

    Coules Member

    Joined:
    Jul 18, 2006
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    Thanks for that. What's the situation with regard to OEM versions? Mine is labelled NERO OEM 6.6.1.4 and doesn't allow autoburning with DVD Shrink - can it be updated? I've looked, obviously, on the Nero site, but can't seem to turn up the answer.

    Apologies, though, if this is a stupid question...



     
  8. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    @Coules
    Yes you can update the oem version to the latest - you just need package 1. link
    As long as you have Burning Rom in the oem version you'll be able to autoburn w/ Shrink.
     
  9. wolfniggr

    wolfniggr Regular member

    Joined:
    Dec 15, 2004
    Messages:
    1,080
    Likes Received:
    0
    Trophy Points:
    46
  10. wolfniggr

    wolfniggr Regular member

    Joined:
    Dec 15, 2004
    Messages:
    1,080
    Likes Received:
    0
    Trophy Points:
    46
     
    Last edited: Jul 15, 2007
  11. Coules

    Coules Member

    Joined:
    Jul 18, 2006
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    Thanks to everyone for the replies; just the info I needed.

    BC
     
  12. didjamom2

    didjamom2 Guest

    I know this has really nothing to do with this thread but I have a problem I think someone here could help me with. I bought and installed as cd/dvd burner from Pioneer on my computer and it came with a Nero 7 Essentials disc to get me started. Problem is it won't install. It comes with a embedded key that it finds itself to register the product, yet it's telling me that the embedded key is incorrect. Please help!
     
  13. Beatles74

    Beatles74 Member

    Joined:
    Feb 27, 2007
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    Hello. Me again. I had problems with Nero and Shrink a few months ago. I never figured out what the cause was but one of the options was to just get a new computer. Well, that time has come.

    My new PC has Windows Vista Home Premium and Roxio as a burner.

    I really enjoyed the Decrypter/Shrink combo, as it was very easy to use and when it comes to certain programs, I need my hand held.

    I was wondering, can I use the Decrypter/Shrink combo with Roxio using Vista? If there's already a link about this, please point me in that direction. Or, can I use Nero instead? IF so, which version? Is the version suggested in this thread compatible with Vista?

    I haven't done anything yet so I figured I'd ask you experts first. Thanks in advance.
     
  14. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Hello again Beatles74
    Yes you can still use DVD Shrink an Decrypter w/ Vista.

    Nero will work too version 7.5.9.0 and above are Vista compatible and version 7.7.5.1 is Vista certified. The latest version is 7.10.1.0.

    If you decide to you with Nero uninstall Roxio and run the zap tool.

    Enjoy the new pc!

     
  15. Beatles74

    Beatles74 Member

    Joined:
    Feb 27, 2007
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    I figured out that Shrink/Decrypter works with Vista. So far so good, except sometimes some "invalid" and "error" type boxes pop up but I click "ok" or "ignore" and it finishes burning with no problem.

    If I have any other problems, I know where to come for help. Thanks.
     
  16. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    You can always post back the total error message and we should be able to sort that out for ya.

    I'd add one more app to your arsenal - DVDFab HD Decrypter. It's a ripper like decrypter but it's still updated to handle the newer copy protections that Shrink or Decrypter can't.
     
  17. golino

    golino Member

    Joined:
    Dec 8, 2007
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    please help!!

    all i want to do i burn avi files as data onto dvds so i can watch them in my divx player.

    which program do i need to do this??
     
  18. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    @golino
    Wrong thread for that question.
    Start a thread in the DVD for Newbies forum.
     

Share This Page