I've got a .img file that I'm trying to burn to a DVD9. I've already got 4 coasters. I tired burning to the disk via the burn image to disk option on Nero 7 Ultra Edition and tried to use DVD Decrypter to burn the disk. But both programs fail with a error. What am I doing wrong???? Any help will be appreciated. Dvd writer NEC RW ND-3540A. Disc: Datawrite titanium 2.4x DVD+R DL
Was the original image for a DL disc? Do you know the image is good? You might also post your NeroHistory log after you remove your serial number.
The image was downloaded but no one else has had any problems as they would have posted a comment. The image is from a DVD9. I have just mounted the image and run it through the DVD shrink analyser, as this normally picks up errors. The image seems fine. Find below Nero History. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 NT-SPTI used Nero API version: 7.5.9.0 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\Nero - Burning Rom Internal Version: 7, 5, 9, 0 Recorder: <_NEC DVD_RW ND-3540A> Version: 1.04 - HA 1 TA 1 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : SAMSUNG SP4002H atapi Port 0 ID 0 DMA: On DiskPeripheral : HDS722516VLAT80 atapi Port 0 ID 1 DMA: On CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-3540A atapi Port 1 ID 1 DMA: On CdRomPeripheral : SJ7002V UHI314I 1.0 aryl8i6n Port 3 ID 0 DMA: Off === CDRom-Device-Map === _NEC DVD_RW ND-2500A E: CDRom0 _NEC DVD_RW ND-3540A F: CDRom1 SJ7002V UHI314I G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 991MB (1015284kB) Free physical memory: 594MB (609020kB) Memory in use : 40 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.12.2006 NeroAPI 15:00:25 #1 Phase 112 File APIProgress.cpp, Line 282 DVD-Video files reallocation started 15:00:25 #2 Phase 114 File APIProgress.cpp, Line 282 DVD-Video files reallocation completed (no file modified) 15:00:25 #3 Phase 111 File APIProgress.cpp, Line 282 DVD-Video files sorted 15:00:25 #4 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 15:00:25 #5 Text 0 File AudioCompilationImpl.cpp, Line 838 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 15:00:25 #6 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 15:00:25 #7 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 15:00:25 #8 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 15:00:26 #9 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286111 (508:01.36, 4465MB) 15:00:26 #10 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO 15:00:26 #11 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: _NEC DVD_RW ND-3540A, Media type: DVD-R Disc Manufacturer: TTG02 - Disc Application Code: 64, Disc Physical Code: 193 15:00:26 #12 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:00:26 #13 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [F: _NEC DVD_RW ND-3540A] -------------------------------------------------------------- 15:00:26 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [F: _NEC DVD_RW ND-3540A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2286112 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2286112 | 0 | 0x00 2286112 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 15:00:26 #15 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 15:00:26 #16 Phase 24 File APIProgress.cpp, Line 282 Caching of files started 15:00:26 #17 Text 0 File Burncd.cpp, Line 4278 Cache writing successful. 15:00:26 #18 Phase 25 File APIProgress.cpp, Line 282 Caching of files completed 15:00:26 #19 Phase 36 File APIProgress.cpp, Line 282 Burn process started at 8x (11,080 KB/s) 15:00:26 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 15:00:26 #21 Text 0 File DVDR.cpp, Line 3058 Recording mode: Sequential Recording Mode 15:00:26 #22 Text 0 File DVDR.cpp, Line 3214 Start write address at LBA 0 DVD high compatibility mode: Yes 15:00:26 #23 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 15:00:27 #24 Text 0 File Cdrdrv.cpp, Line 1292 15:00:27.906 - F: _NEC DVD_RW ND-3540A : Queue again later 15:10:00 #25 Text 0 File WriterStatus.cpp, Line 113 <F: _NEC DVD_RW ND-3540A> start writing Lead-Out at LBA 2286112 (22E220h), length 0 blocks 15:10:00 #26 Text 0 File DVDR.cpp, Line 3434 EndDAO: Last written address was 2286111 15:10:16 #27 Phase 37 File APIProgress.cpp, Line 282 Burn process completed successfully at 8x (11,080 KB/s) 15:10:17 #28 Text 0 File AudioCompilationImpl.cpp, Line 863 DRM: DRM burn session terminated. 15:10:17 #29 Text 0 File AudioCompilationImpl.cpp, Line 892 DRM: Closing entire DRM handling. Bye. 15:10:17 #30 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 15:10:20 #31 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 15:10:20 #32 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 1C82-0000-19E5-MAAX-4002-2570-**** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 NT-SPTI used Nero API version: 7.5.9.0 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\Nero - Burning Rom Internal Version: 7, 5, 9, 0 Recorder: <_NEC DVD_RW ND-3540A> Version: 1.04 - HA 1 TA 1 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : SAMSUNG SP4002H atapi Port 0 ID 0 DMA: On DiskPeripheral : HDS722516VLAT80 atapi Port 0 ID 1 DMA: On CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-3540A atapi Port 1 ID 1 DMA: On CdRomPeripheral : SJ7002V UHI314I 1.0 abqvz003 Port 3 ID 0 DMA: Off === CDRom-Device-Map === _NEC DVD_RW ND-2500A E: CDRom0 _NEC DVD_RW ND-3540A F: CDRom1 SJ7002V UHI314I G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 991MB (1015284kB) Free physical memory: 628MB (643100kB) Memory in use : 36 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.12.2006 NeroAPI 19:08:46 #1 Phase 112 File APIProgress.cpp, Line 282 DVD-Video files reallocation started 19:08:46 #2 Phase 114 File APIProgress.cpp, Line 282 DVD-Video files reallocation completed (no file modified) 19:08:46 #3 Phase 111 File APIProgress.cpp, Line 282 DVD-Video files sorted 19:08:46 #4 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 19:08:46 #5 Text 0 File AudioCompilationImpl.cpp, Line 838 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 19:08:46 #6 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 19:08:46 #7 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 19:08:46 #8 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 19:08:46 #9 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286127 (508:01.52, 4465MB) 19:08:46 #10 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO 19:08:46 #11 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: _NEC DVD_RW ND-3540A, Media type: DVD-R Disc Manufacturer: TTG02 - Disc Application Code: 64, Disc Physical Code: 193 19:08:46 #12 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 19:08:46 #13 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [F: _NEC DVD_RW ND-3540A] -------------------------------------------------------------- 19:08:46 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [F: _NEC DVD_RW ND-3540A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2286128 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2286128 | 0 | 0x00 2286128 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 19:08:46 #15 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 19:08:46 #16 Phase 24 File APIProgress.cpp, Line 282 Caching of files started 19:08:46 #17 Text 0 File Burncd.cpp, Line 4278 Cache writing successful. 19:08:46 #18 Phase 25 File APIProgress.cpp, Line 282 Caching of files completed 19:08:46 #19 Phase 36 File APIProgress.cpp, Line 282 Burn process started at 8x (11,080 KB/s) 19:08:47 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 19:08:47 #21 Text 0 File DVDR.cpp, Line 3058 Recording mode: Sequential Recording Mode 19:08:47 #22 Text 0 File DVDR.cpp, Line 3214 Start write address at LBA 0 DVD high compatibility mode: Yes 19:08:47 #23 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 19:08:49 #24 Text 0 File Cdrdrv.cpp, Line 1292 19:08:49.500 - F: _NEC DVD_RW ND-3540A : Queue again later 19:18:23 #25 Text 0 File WriterStatus.cpp, Line 113 <F: _NEC DVD_RW ND-3540A> start writing Lead-Out at LBA 2286128 (22E230h), length 0 blocks 19:18:23 #26 Text 0 File DVDR.cpp, Line 3434 EndDAO: Last written address was 2286127 19:18:40 #27 Phase 37 File APIProgress.cpp, Line 282 Burn process completed successfully at 8x (11,080 KB/s) 19:18:41 #28 Text 0 File AudioCompilationImpl.cpp, Line 863 DRM: DRM burn session terminated. 19:18:41 #29 Text 0 File AudioCompilationImpl.cpp, Line 892 DRM: Closing entire DRM handling. Bye. 19:18:41 #30 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 19:18:44 #31 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 19:18:44 #32 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ======
This seems to say you have it set for a normal DVD. You might check and make sure you show DVD-9 prior to burning. Otherwise, try it on a normal DVD and see if it works. Of course, the log was from Dec 2006--, see if you have another one with the last burn attempts.
Just tried to burn it again and it failed. This is the error report for it. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 NT-SPTI used Nero Version: 7.5.9.0 Internal Version: 7, 5, 9, 0 Recorder: <_NEC DVD_RW ND-3540A> Version: 1.04 - HA 1 TA 1 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <_NEC DVD_RW ND-3540A >Version: 1.04 - HA 1 TA 1 - 7.5.9.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : SAMSUNG SP4002H atapi Port 0 ID 0 DMA: On DiskPeripheral : HDS722516VLAT80 atapi Port 0 ID 1 DMA: On CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-3540A atapi Port 1 ID 1 DMA: On CdRomPeripheral : SJ7002V UHI314I 1.0 abk1spte Port 3 ID 0 DMA: Off === CDRom-Device-Map === _NEC DVD_RW ND-2500A E: CDRom0 _NEC DVD_RW ND-3540A F: CDRom1 SJ7002V UHI314I G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 991MB (1015284kB) Free physical memory: 629MB (644948kB) Memory in use : 36 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.2.2007 UDF/ISO compilation 16:24:30 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 16:24:30 #2 Phase 112 File dlgbrnst.cpp, Line 1746 DVD-Video files reallocation started 16:24:30 #3 Phase 114 File dlgbrnst.cpp, Line 1746 DVD-Video files reallocation completed (no file modified) 16:24:30 #4 Text 0 File Isodoc.cpp, Line 6509 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 16:24:31 #5 Phase 111 File dlgbrnst.cpp, Line 1746 DVD-Video files sorted 16:24:31 #6 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 16:24:31 #7 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 16:24:31 #8 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 16:24:32 #9 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 4058463 (901:52.63, 7926MB) 16:24:32 #10 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 16:24:32 #11 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: _NEC DVD_RW ND-3540A, Media type: DVD+R9 Double Layer 16:24:32 #12 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 16:24:32 #13 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 4058464 (4058464) = #4058464/901:52.64 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4058464 blocks [F: _NEC DVD_RW ND-3540A] -------------------------------------------------------------- 16:24:35 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [F: _NEC DVD_RW ND-3540A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8311734272, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 4058464 | 0 | 0x00 0 | 1 | 1 | 0x41 | 4058464 | 0 | 0x00 4058464 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 16:24:35 #15 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 16:24:35 #16 Phase 24 File dlgbrnst.cpp, Line 1746 Caching of files started 16:24:35 #17 Text 0 File Burncd.cpp, Line 4278 Cache writing successful. 16:24:35 #18 Phase 25 File dlgbrnst.cpp, Line 1746 Caching of files completed 16:24:35 #19 Phase 36 File dlgbrnst.cpp, Line 1746 Burn process started at 4x (5,540 KB/s) 16:24:35 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 16:25:04 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07 Buffer x067b1040: Len x804 16:25:04 #22 Text 0 File DVDPlusDualLayer.cpp, Line 640 L0 Data Zone Capacity set to 2029408 (1EF760h, 3963MB) -> OK, confirmed setting 16:25:04 #23 CDR -1205 File DVDPlusDualLayer.cpp, Line 667 Burning Layer 1 16:25:04 #24 Text 0 File DVDPlusDualLayer.cpp, Line 677 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 16:25:04 #25 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07 Buffer x067b1040: Len x804 16:25:04 #26 Text 0 File DVDR.cpp, Line 6481 Drive: _NEC DVD_RW ND-3540A Book Type request [NEC]: DVD-ROM, write to RAM select Book Type setting from RAM Changing the Book Type was finished successfully, return code 0 16:25:04 #27 CDR -1207 File DVDR.cpp, Line 6174 Book Type automatically set to: DVD-ROM 16:25:04 #28 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 16:34:32 #29 SPTI -1135 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 17 CF 60 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x098f3200: Len x10000 0x00 00 01 BA 45 27 8C E9 25 57 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 80 09 40 02 44 8C 04 3F FF 0x0E 1A 3A 56 31 5C 0E 02 68 00 D0 ED F0 D0 82 20 16:34:32 #30 CDR -1135 File Writer.cpp, Line 299 Write error F: _NEC DVD_RW ND-3540A 16:34:33 #31 SPTI -1135 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C 16:34:33 #32 SPTI -1176 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03 16:34:33 #33 Text 0 File DVDR.cpp, Line 6481 Drive: _NEC DVD_RW ND-3540A Book Type request [NEC]: DVD-ROM, write to RAM select Book Type setting from RAM Changing the Book Type was finished successfully, return code 0 16:34:33 #34 CDR -1176 File WriterStatus.cpp, Line 162 Session fixation error F: _NEC DVD_RW ND-3540A 16:34:33 #35 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 16:34:34 #36 Phase 38 File dlgbrnst.cpp, Line 1746 Burn process failed at 4x (5,540 KB/s) 16:34:34 #37 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 16:34:38 #38 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 16:34:38 #39 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)