How to: Update Eurovox Max V with Kuro 18.04.08 (R.I.P 28/11/2008)

Here ya go mate

USB Adapter Cable Code ZP43W
http://www.maplin.co.uk/module.aspx?ModuleNo=29968&DOY=17m6&tabs=n

 

Hi can someone tell me whats the best thing to do to get my channels back? I tried power scan but no channels and tried this:-

"TRy this first Manually scanning channels.
Press menu, Installation, User installation, Enter pin,
Then press ch edit (green button)
Then press Add (red button)
Use the v arrow on the remote change the frequency to 418.25 change the Symbol rate to 6887 press ok repeat this process for 371 exit once press ok on the frequencies you just added then press manual scan the staions will appear at the end of your channel list "

but only have the basic bbc. itv channels.

What do i do now?

 

whereabouts are you?

 

Gloucestershire, ive got virgin.

 

no to sure are you ex N@L if not try a power scan on 6.952,also make sure your coaxil is in the rf in on the box and your scart from the tv is firmly fixed in the tv scart on the box.ps them requencies you used for the manual scan are for Ireland

 

I did the power scan & all the symbol rates are 6.952, oh right it worked for me 2 wks ago but not now, wot frequency should i use instead then?
its all a bit confusing to me Lol.

 

go to power scan start at 100mhz stop at 800mhz symbolrate 6952(once)press ok on step 8 if that dosn't work try it on 6.887

 

HI THERE, MY EUROVOX MAX V HAS GONE OFF AGAIN. IF I BUY THE NULL MODEM CABLE AND USB ADAPTER. WILL THIS UPDATE IT SO I DON'T HAVE TO INPUT CODES ANYMORE. SORRY FOR SOUNDING LIKE AN AMMETURE BUT I'M NEW TO THIS. THANKS FOR YOUR HELP.

 

Firstly Bud take off the CAPITALS its known as shouting, and theres no one here that needs shouted at this time on a saturday morning LOL.....

yeah if you buy the cables you will be able to upgrade the box and will not require manually inputing codes, get them and follow the steps on the threads, if your stuck someone will advise you....

 

Ok guys I need some help
Im trying to flash my box atm and its just run the found new hardware wizard but im getting the following message

the file ser2pl.sys is needed, type the path where the file is located and click ok
Ive tried directing it to my D drive but its saying file not found
Anyone know what I have to do, I have a eurovox max v 2008 original but im totally lost
HELP !!!!!!!!!!!!

 

Are you using a USB to Serial Adapter to connect to the box?

-

 

Yes I am

 

Well then Amanda, you need to install the software drivers that came on Disc with that adapter. Once installed you will be able to set the COM port number to connect to the box.

With some of these adapters there's actually three drivers to be installed so you may have to repeat the process more then once.

Do you have the disc?

Where did you get the adapter?

-

 

Yes I have the disc in the drive at the moment and the box connected to the usb adapter, should i disconnect the box while installing the drivers?
I got the cable with the box and bought the usb adapter in Petes

 

Browse the disc contents to see if there's a setup file there, if there is just run it.

If not, (With the box disconnected) plug in the USB adapter & wait for the "Found new hardware wizard" then either choose to point to the disc when given the option or choose the option that says "No, I will choose the driver to install but then click on the option for "Have Disc"

 

dose anyone no how i can find the new codes for euro voux box 2005 on telewest please help

 

can anyone tell me the new codes for eurovox 2005 box with telewest please help

 

here ya go http://forums.afterdawn.com/thread_view.cfm/662154

 

Please note that the forum rules have changed. Posting of new codes is no longer allowed. See this http://forums.afterdawn.com/thread_view.cfm/662154 for more information.

 

How Ya Bud, Just in for another Nose!! talk later!