How to: Update Eurovox Max V with Kuro 18.04.08 (R.I.P 28/11/2008)

same meself des be back later better watch out for you no who!

 

Where can i get a null 9 pin female modem cable from if anyone knows help would be appreciated.

 

whereabouts are you?

 

eurovox cable west midlands

 

USB Adapter Cable Code ZP43W
http://www.maplin.co.uk/module.aspx?ModuleNo=29968&DOY=17m6&tabs=n

Heres the NULL MODEM CABLE Code L71BT
http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6

CAN BE PURCHASED ELSE WHERE CHEEPER

 

thanks for your help

 

i have just reflashed my box, however after doing a powerscan i have lost 70% of my channels, ne1 got ne advice, plz help

 

is it a eurovox max v2008,what firmware have you put on?and whereabouts are you and what provider?

 

im in bolton m8. yh its a eurovox maxv and i used the kuro programme

 

ok first of have you scanned on your proper provider try both 6887 and 6952 (im not sure about the uk)make sure your coaxil is firmly fixed into the rf in on the box,make sure your scart is in the tv scart on the box and not the vcr but firstly tell me which kuro firmware you have on your box press menu config system info

 

the kuro is called kuro image v3 with 8% signal fix. yep everythink is correctly inserted on eurovox

 

try the kuro 18/04 firmware which can be found in eamos library eurovox folder under y pic,by the way whereabouts did you get that firmware from thtas not what it says in your system info.

 

i got this from bigmaq, system info says.

model: DVB-XC BOX V TDA
S/W VER: 1.0 STC4 APR 28 2008
H/W VER: 2.0T K5
BOOTSTRAP: V001
S/W BUILD: KURO

ne ideas m8?? plz help

 

yes just what i have just told you put the 18/04 firmware on and you should be ok,if you need firmware in futher come here and don't use dodgy toolbars.

 

hi guys need some help if poss tried to flash my box using kuro downloaded fine/default scan/power scan but comes up with NO TRANSPONDER TO SCAN. have been told it needs new code input am on nthell manchester using 6887 sym rate any help much appreciated plus how to put code in please

 

hi again, just to claify what box it is system info as follows DVB-XC Box V TDA 1.0 STC4 Apr 18 2008 2.0t K5 v001 KURO after iv downloaded kuro 18 4 08/power scan comes up with no channels i added uk list&frequencies from eamos still comes up no channels am on ntl manchester not in ireland many thanks for the help to press

 

Press the Menu button on your remote, and then go into 'Config' menu and select 'Clear Data'

It will then ask for your PIN (default is 0000 or 1004)
Then select 'Factory Default'

It will then ask you to select the symbol rate use 6.887

Press OK when 'Reset to Factory Default Settings' comes up

It will then say 'Wait to Factory Settings' and will then start to do a Full Power Scan (using the Symbol rate you selected earlier 6887

It will then search through for channels, , do not interrupt it until it finishes.

It wil then exit to allow you to view your programs, but the code being updated message will probably come up for a while,

Put the box onto Sky Sports . It may only take a few mins but again do not interrupt it (even if you think it is not working!)

Sky Sports will come up and all your channels will be back and you won't have to manually enter your codes anymore.

 

thanks 4 the advise but still getting the same response, although when i go to user intallation an yellow comes up nagra edit theres no numbers all zeros so i put in then default/power scan an still no channels after the scan says "channel not currently available" plus i cant do a manual scan as it wont let me add a channel number any ideas thanks

 

You need to know what area you are in Manchester 1 or 2. and please edit your post quickly please and remove those.