Discussion in 'Digital TV - UK & Europe' started by SG8, Apr 16, 2008.
Both NTHell Dublin, Same freq.
have you the coaxil plugged into the rf in on the box?
Yes coaxil in RF in & connected to Tv via Loop out.
right we'll illiminate the obvious have you your scart plugged into the tv scart on the box?
OK, Yes scart in tv
right is the connection to the box split,if you plug the replay lite in were you have the eurovox does it work ok?
Yes, Connection is split but Replay lite works fine from same connection. Also tried Eurovox using direct NTHell connection & the same, No Signal.
you could give this a go menu-preferences-language settings ok-then press 1968 and see if your emulation is set to enable.
Yes,Emulation set to enable. Thanks for your time & help with this, I'm really stumped. It was working fine after the April'08 update until about a month ago & what with hols etc I'm only trying to sort it now.
stumped meself mate as to how its working at your mates and not yours,we've tryed everything at this stage,and your replays working off the same feed,ok last thing to try got to menu config-tv settings-and see if your signal booster is turned on,if it is turn it off,or try it turned on.
Hi Karl dont mean to but in but Have you actually tried powerscaning again at your own address, Didnt see a mention of you doing it at your home only that it was working at your mates?.
no proplem HiTeck just took it that thats why he brought it round to his mates,as you say nothing to lose,glad your here mate in any way going for a pint and didnt want to leave elvis all shook up lol
Lol Karl. Enjoy your pint mate .
Tried it on & off & same difference. I have it on while on this forum & when I went back it had picked up Sky Prem Movies but when I changed channels it went back to No Signal. Don't know if this helps any. Also, I power scanned at my home a number of weeks ago & no difference.
Good One Karljd. Have one for me. Thanks for the help.
Elvis64 try this,
Menu> Config> Then ok on Clear data,
Type 0000 or 1004,
Ok on Erase all channels then ok again.
wait for it to clear all channel data then,
Press Menu along to instalation, Press ok type 0000.
Now press powerscan "the Yellow button",
a box will then load like this
Enter the information as is above then click ok to scan and wait for the result,
May take a while to scan,
best of luck.
I have to go out myself but I'll check in later for any more much needed advice. Thanks for the help.
I'am trying this & will leave it running while I'm out. It shows a signal level & quality of 80-90+% which looks fine. I'll let you know how I get on. Thanks again.
Karl I think you gave elvis the idea of a pint or too also mate.
Tried the powerscan but no luck. Came up with no channels.
Separate names with a comma.