How to: Update Eurovox Max V with Kuro 18.04.08 (R.I.P 28/11/2008)

ok back again sorry i went out bloody drowned,when you done the scan did it pick up any tps?are you sure your not mmds?

 

Sorry I was out. Picked up nothing on recan.Not sure if I'm mmds but same box worked fine upto a few weeks ago & replay lite box works fine using same connection.

 

Try a re-scan as above using 6875 not 6887 as the symbol rate.

 

Trying 6875 now. Will let you know. Thanks

 

Sorry Mate, could again explain in better detail what to do, regards what button to press? Remote Control Button any button or Camera/Mobile Button, hold the button down or rapid pressing?? Sorry complete thicko here i am!

 

Press ANY button on your remote, Point it at a camera/mobile phone as if you're going to take a picture of the remote, Through the screen on a camera/mobile phone you will see the remote sensor flash.

if you see it flashing the remote is fine, if not the remote is at fault.

cant really explain better than that mate.

 

What he means is: Using a camera phone, set phone to camera, instead of looking through the lens, point the phone at the box and point the remote control at the box via the lens, you should see the remote flicker!
Nice nick name by the way! its a wonder you didnt put 2/1 at the end of it!!!!

 

Evening HiTek sorry for butting in ! same answer! LOL

 

Evening Des, I do it often mate, no worries.

 

Thanks HiTec,
Done that and no response, tried it with my other remote and it worked, so would you say remote is knackered? As i said in earlier thread, my own remote was faulty a while back and i was just pressing a few buttons on the remote and i must of activated it again as it has been working ever since, so thought the same regards my pals that stopped working, so not sure if anyone else out there knows any more regards remotes or is this bin material now? cheers!

 

Ask any Rangers Fan about Lisbon 67 they will all tell you the score, no need to post it alongside my username, in fact any Football Fan will tell you the score in what happened in Lisbon in 67 so felt no need to put it on!

ps I'm Not a Strachan or Dermot Desmond Fan Hence gave up my season ticket this year, after having one since the late 80's when there were only 7,000 of us then.

 

If your not getting anything from the remote and you are with others as you said it's probably had it providing your bats are ok and no buttons are stuck.

You can buy these remotes off fleabay if you look around.

 

Tried the recan on 6875 & again on 6887 but no TP's picked up. Can't fathom this. Would it be possible that the replay lite, which is working fine, can operate off a low strength signal but the Eurovox MaxV can't.

 

i followed this procedure and when i click on the download button it pops up saying no available com port! and suggestions on wat to do next please thanks

 

yr this courtesy of celtic71 To see which port your USB adapter is connected to, connect your USB adapter and follow the following instructions:

1. Go to the Start Menu
2. Right click on "My Computer"
3. Select "Properties"
4. Click on the "Hardware" tab
5. Click on "Device Manager"
6. Click the + sign next to "Ports (COM & LPT)"
7. One of the listed ports should indicate which port your USB adapter is connected to (e.g. COM1, COM2, COM3, etc.)
8. Go back to your map software program that you use to transfer data and make sure it is looking at the correct port.
9. You should be able to transfer data once the correct port is selected

If you need drivers go here

http://www.gilsson.com/usb_drivers_download.htm

Follow my advice to step 7. Locate your USB Adapter (port *)

Right click on that port and select properties. Then select port settings, then select advanced. At the bottom of that tab will be a drop down box with the port selected (port * in your case). Use the drop down to select another port (eg 1, 2 or 3). If the port you want to use is already allocated to something else, you can use the same procedure to reassign that port after you have finished.
Save the selections in the usual way. The USB converter will be permanently assigned to the port you selected.

 

thanks for all ur help i finally got it workin just 1 more question when my eurovox was working before i had about 160 channels now i only have 90 wats the story there i dont really mind once i have the sports and movies lol

 

whereabouts are you?and have you done a factory reset after loading the firmware?

 

Thanks very much guys, I have just downloaded the software, completed a full power scan, selected Sky Sports 1, waited a few minutes for the codes to be updated and hey presto! I have approximately 219 channels now. Special Thanks go out to SG8 for the step by step instructions. Thanks again, you rule!!

 

Guys,

Having massive problems with picture distortion on loads of channels, running on the update from 28/04 i think which i have read can cause problems with picture quality so was wondering if using the update from the 18/04 would solve this? Also i have upgraded to windows vista, are there any problems i would encounter trying to flash the box with firmware using vista that never occured with xp?
Cheers