I am trying to backup Dvds with Nero. I have decrypted them, and am ready to burn a compilation by putting the necissary files into the Video_TS folder. Then when I click burn I get: DVD Video Files Sorted Caching of Files Started Caching of files completed Burn Process Started at 2.4x (3,312 KB/s) HP DVD Writer 200j Specified Host adapter invalid HP DVD Writer 200j/H1 T0 Burn Process Failed at 2.4x (3,312 KB/s) I don't really know what that means. I guess it means that this hardware doesn't actually burn DVDs and I am out of luck. If you could let me know what the problem is, and what i can do to fix the situation I would greatly appreciate it. Thanks
when i turn on nero it does say that nero has a known compatibility issue with this version. I will try an update
I got another failure message Hp DVD Writer 200j Unspecified Target error Generated DVD high compatitbility border HP DVD Writer 200j invalid field in command HP DVD Writer 200j Could not perform end of disc-at-once Burn process failed
right, lets have a look at your nero log. it's in c:\program files\ahead\nero\nerohistory.log, and all burns good and bad are appended to it. It's quite easy to differentiate each log section in there, so copy paste a section, ie last section, minus serial number which is usually at start of each section and begins with '1A21' or similar
====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.13 Internal Version: 6, 6, 0, 13c Recorder: <HP DVD Writer 200j> Version: 1.36 - HA 1 TA 0 - 6.6.0.13 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SAMSUNG CD-ROM SC-148C >Version: B100 - HA 1 TA 1 - 6.6.0.13 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST380022A atapi Port 0 ID 0 DMA: On CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-ROM SC-148C atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HP DVD Writer 200j E: CDRom0 SAMSUNG CD-ROM SC-148C F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 503MB (515564kB) Free physical memory: 186MB (191020kB) Memory in use : 62 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.6.2005 UDF/ISO compilation 4:46:47 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 4:46:47 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 4:46:47 PM #3 Text 0 File Isodoc.cpp, Line 6194 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 4:46:47 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 4:46:47 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 4:46:47 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 4:46:47 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 4:46:47 PM #8 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-At-Once, using DVD media 4:46:47 PM #9 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2201247 (489:09.72, 4299MB) 4:46:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 4:46:48 PM #11 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: HP DVD Writer 200j, Media type: DVD+R 4:46:48 PM #12 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:46:48 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2201248 (2201248) = #2201248/489:9.73 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2201248 blocks [HP DVD Writer 200j] -------------------------------------------------------------- 4:46:48 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [HP DVD Writer 200j] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4508155904, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2201248 | lead-out | 1 | 0x41 | 0x00 4:46:49 PM #15 Text 0 File DriveLocker.cpp, Line 684 Writer-Lock failed after 1000msec 4:46:49 PM #16 Phase 156 File dlgbrnst.cpp, Line 1832 Drive is in use by another application Existing drivers: File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 8:24:08 AM File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 5/19/2004 12:33:44 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
- i've found references to a firmware rev of 1.72 so far , but dunno where from yet. plus i'm more concerned with this -
right - getting nearer - http://forums.afterdawn.com/thread_view.cfm/75920 it seems the 200i is the same as the 200j, i'll see if that makes it easier to find firmware
sorry, was still looking. just found what i think it is - that should do it, there's a quicker way - in windows explorer, right click on your burner, go into properties /then click on recording tab, and untick 'Enable CD recording on this drive'
I tried burning again and got failure again ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.13 Internal Version: 6, 6, 0, 13c Recorder: <HP DVD Writer 200j> Version: 1.36 - HA 1 TA 0 - 6.6.0.13 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SAMSUNG CD-ROM SC-148C >Version: B100 - HA 1 TA 1 - 6.6.0.13 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST380022A atapi Port 0 ID 0 DMA: On CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-ROM SC-148C atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HP DVD Writer 200j E: CDRom0 SAMSUNG CD-ROM SC-148C F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 503MB (515564kB) Free physical memory: 108MB (111444kB) Memory in use : 78 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.6.2005 UDF/ISO compilation 6:01:48 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 6:01:48 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 6:01:48 PM #3 Text 0 File Isodoc.cpp, Line 6194 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 6:01:48 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 6:01:49 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 6:01:49 PM #6 Text 0 File Writer.cpp, Line 122 Writer HP DVD Writer 200j running 6:01:49 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 6:01:49 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 6:01:49 PM #9 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-At-Once, using DVD media 6:01:49 PM #10 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2201247 (489:09.72, 4299MB) 6:01:49 PM #11 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 6:01:49 PM #12 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: HP DVD Writer 200j, Media type: DVD+R 6:01:49 PM #13 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:01:49 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2201248 (2201248) = #2201248/489:9.73 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2201248 blocks [HP DVD Writer 200j] -------------------------------------------------------------- 6:01:49 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [HP DVD Writer 200j] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4508155904, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2201248 | lead-out | 1 | 0x41 | 0x00 6:01:53 PM #16 CDR -1202 File DriveLocker.cpp, Line 702 Drive is in use of IMAPI HP DVD Writer 200j\H1 T0 6:03:53 PM #17 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 6:03:53 PM #18 Text 0 File Burncd.cpp, Line 4051 Cache writing successful. 6:03:53 PM #19 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 6:03:53 PM #20 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 6:03:54 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:03:54 PM #22 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x032D0600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 6:03:54 PM #23 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 6:03:54 PM #24 Text 0 File DVDR.cpp, Line 5610 Drive: HP DVD Writer 200j Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 6:03:54 PM #25 CDR -1207 File DVDR.cpp, Line 4786 Book Type automatically set to: DVD-ROM 6:03:54 PM #26 Text 0 File DVDPlusRW.cpp, Line 652 Start write address at LBA 0 DVD high compatibility mode: Yes 6:06:27 PM #27 SCSI -400 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04080000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x91 Sense Qual: 0xC2 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x91 0xC2 6:06:27 PM #28 CDR -400 File Writer.cpp, Line 311 Unspecified target error 6:06:27 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 6:06:27 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 6:06:28 PM #31 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 6:06:28 PM #32 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xF9 0x15 0xA1 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 6:06:28 PM #33 Text 0 File DVDR.cpp, Line 5610 Drive: HP DVD Writer 200j Book Type request [gen]: DVD+R, write to EEPROM Changing the Book Type was finished successfully, return code 0 6:06:28 PM #34 CDR -1066 File WriterStatus.cpp, Line 167 Invalid field in command 6:06:28 PM #35 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 6:06:28 PM #36 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 8:24:08 AM File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 5/19/2004 12:33:44 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
well we're progressing at least. Next i think you need to sort that firmware out as there's not one mention of any media brand in there, ie your drive doesn't even know what type/brand of discs it's trying to write to
