I can't get Xecuter 2.6 to flash with Xecuter Bios or EvoX Bios NEED HELP

I have tried over and over to get my V 1.0 xbox to flash but it will not work it says it is flashing and turns off then when i reboot same blue screen waiting to be flashed i have tried both banks, from what i understand i cannot ftp untill i have a dash installed but i do have a crossover cable and flash fxp so if anyone can help it would be greatly appreciated

Cheers
CUA

 

So you are at "Flash bios 3.0.3" screen. Then follow this
http://www.teamxecuter.com/flashbios/?CMSSESSID=0475597421ee7145739326bb1745f787

 

no i did this but everytime i do it reboots with and starts over with the same 3.03 screen

 

make sure you check at the protect/unprotect switch. set it to unprotect.

 

it is

 

hmm.. did you burn bios right? which bios are you using

 

and it is on FlachBIOS 3.0.1 not 3.0.3

 

i followed the directions verbatim and it is the flash bios from the xecuter home page but i have also tried to use EvoX but my x box will not evern recognise the media and i am using verbatim dvd-r so it is quality media

 

3.0.1 is ok. I mean which bios? like x2 4977, Evox m8, etc.http://www.teamxecuter.com/flashbios/disc.htm

 

im not sure its the one from team xecuter.com here are all the files i have... auto.installer.deluxe.v3.0.rar, EvolutionX build 3935.rar, EvolutionX1_8_458_iso.rar, XBox_Dashboards_Backups.zip, and i know how to use winRAR so i did extract them most of these files i got from a link through your signature. so if that helps

 

So they are not bios. Go back to my page and download X2 5032 - 512k bios.

 

o sorry i forgot to put i have EvoX M7 should i update

 

Did you make sure to rename your bios file to "bios.bin" without quotes before you burned it. The disc also has to be burned as an ISO and make sure you finalise it. I know you said you followed the tut verbatim but these are the things people seem to mess up on the most. You are using good media, I have never had a problem with verbatim on the thompson, or samsung drives, never had experience with the phillips though.

 

Yes bios.bin and they automatically changed to upper case like it says and yes it is a iso, any more suggestions

 

yes, you have to rename bios to bios.bin

it is old bios.
You should get Evox M8 or X2 5032

 

ok about to write new disk with EvoX M8 will reply with results

 

ok so i just flashed with EvoX M8 and it did the routine and now when i went to reboot it beeps then beeps again now there is nothing on the screen just black and my xbox is blinking red and green... What happened... this only happens on bank 1 which is the one i flashed bank 2 is back to flash v 3.0.1 screen

 

Because you have no dash.
Put the autoinstaller disk in dvd drive, it will load

 

i just extracted the Auto.Installer.Deluxe.v3.0.rar and there is many files which ones do i burn to disk?

 

there is an iso in there. Just extract.