Can anyone tell me the cause for this I/O Error? I was using Memorex DVD-Rs and burning successfully 1 out of 5 times. I switched to Verbatim DigitalMovie DVD-Rs and burned 5 out of 5 no problem. Now everytime I try to burn I get this I/O Error from DVD Decrypter. I first used DVD Shrink to rip the ISO then Decrypter to burn it. Nero 6 won't burn either, it just says "Write Error". I put in a lens cleaning CD, didn't help. I cleaned my brand new DVD-Rs, didn't help. I sprayed about half a can of condensed air into the drive, didn't help. I beginning to think it's the DVD-RW itself. It's a Dynex DX-DVDRW8, but it's only 2 weeks old. I can't find firmware for it anywhere either. Should I return it and spend the extra $$$ for a better DVD-RW? I/O Error! Device: [0:1:0] DVDRW IDE1108 B018 (E ASPI SRB Status:0x04 Interpretation: SRB Completed With Error Host Adapter Status: 0x00 Interpretation: Host Adapter Did Not Detect An Error Target Status: 0x02 Interpretation: Check Condition CDB: 2A 00 00 16 BE 90 00 00 10 00 Interpretation: Write (10) – Sectors: 1490576 – 1490591 Sense Area: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Interpretation: Write Error
My problem just happened While Decrypting my original DVD to my Hard Drive. NOT even to the point yet of shrinking or burning with Nero. I got this message. Anyone out there can you help? Decrypting ERROR message “I/O ERROR” While decrypting my used DVD movie to make a backup to burn onto a DVD, I received the following error message in quotes: This happened a couple of times. What do I have to do to fix this error? “I/O Error Device: [1:0:0] HP DVD Writer 200j 1.36 (E) (ATA) ScsiStatus: 0 x 02 Interpretation: Check condition CDB: 28 00 00 0A 6 7 B1 00 00 01 00 Interpretation: Read (10) – Sector: 681905 Sense Area: F0 00 03 00 0A 67 B1 0C 00 00 00 00 1582 00 00 00 00 03 00 Interpretation: Unknown Positioning Error) (0 x 15, 0 x 82)” MY DVD/CD BURNER INFORMATION: Supported Read Features: Read Speed is 32x CD-R CD-RW DVD-ROM DVD+R DVD+RW Supported Write Features: Write Speed is 12x CD-R CD-RW DVD+R DVD+RW
hi guys, i get the same in dvd decrypter, when i try to burn at speeds less than 4X(even though my burner/media support that speed). i upgrade my firmware and still bumcus. B.T.W my drive is a Sony Dual Layer DRU-700A, using PRINCO DVD-R 2X-4X media.
