1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Illegal Disc error using Nero

Discussion in 'Nero discussion' started by homer985, Aug 3, 2005.

  1. homer985

    homer985 Guest

    I see this has been discussed in here before, but I'm now stuck with it. Trying to create a data DVD disc - copying WAV files only to DVD-R disc's. After caching, it dies. Below is the log from Nero of the session, and below that is a log of disc indentifier (I'm using Sony DVD-R and the latest 'Ultra' version of Nero):

    HELP! TIA

    ----------------------------------------------------------------------
    *************
    *************
    1A*********** (serial number obvious withheld)


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.15
    Internal Version: 6, 6, 0, 15h

    Recorder: <TDK DVDRW0404N> Version: 1.08 - HA 1 TA 1 - 6.6.0.15
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <Lite-On LTN486S 48x Max >Version: YDS6 - HA 1 TA 0 - 6.6.0.15
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : IC35L030AVV207-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : Lite-On LTN486S 48x Max atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : TDK DVDRW0404N atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    Lite-On LTN486S 48x Max D: CDRom0
    TDK DVDRW0404N E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 638MB (653808kB)
    Free physical memory: 87MB (89920kB)
    Memory in use : 86 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.8.2005
    ISO compilation
    1:16:09 PM #1 Text 0 File Isodoc.cpp, Line 6314
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    1:16:09 PM #2 Text 0 File Reader.cpp, Line 127
    Reader running

    1:16:09 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    1:16:09 PM #4 Text 0 File Burncd.cpp, Line 3231
    Turn on Disc-At-Once, using DVD media

    1:16:09 PM #5 Text 0 File DlgWaitCD.cpp, Line 269
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2275039 (505:33.64, 4443MB)

    1:16:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 281
    Write in overburning mode: NO (enabled: CD)

    1:16:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 2477
    Recorder: TDK DVDRW0404N, Media type: DVD-R
    Disc Manufacturer: SONY08 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    1:16:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 447
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    1:16:09 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2275040 (2275040) = #2275040/505:33.65
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2275040 blocks [TDK DVDRW0404N]
    --------------------------------------------------------------

    1:16:09 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [TDK DVDRW0404N] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4659281920, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2275040 | lead-out | 1 | 0x41 | 0x00

    1:16:09 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    1:25:58 PM #12 TRANSFER -15 File ThreadedTransfer.cpp, Line 1780
    Cache file too small - not all files could be cached

    1:26:05 PM #13 Text 0 File Burncd.cpp, Line 4116
    Cache writing successful.

    1:26:05 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    1:27:06 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2.4x (3,324 KB/s)

    1:27:07 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    1:27:07 PM #17 Text 0 File DVDR.cpp, Line 2357
    Recording mode: Sequential Recording Mode

    1:27:07 PM #18 Text 0 File Mmc.cpp, Line 21663
    Set BUFE: Buffer underrun protection -> ON

    1:27:07 PM #19 Text 0 File DVDR.cpp, Line 2511
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    1:27:07 PM #20 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    1:27:07 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xB6 0xE0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    1:27:07 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1763
    Illegal disc

    1:27:07 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1763
    Could not perform start of Disc-at-once

    1:27:07 PM #24 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:44 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



    ----------------------------------------------------------------------
    Unique Disc Identifier : [DVD-R:SONY08D1]
    ----------------------------------------------------------------------
    Disc & Book Type : [DVD-R] - [DVD-R]
    Manufacturer Name : [Sony Recording Media Co.]
    Manufacturer ID : [SONY08D1]
    Blank Disc Capacity : [2,298,496 Sectors = 4.71 GB (4.38 GiB)]
    ----------------------------------------------------------------------
     
  2. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
    @homer985 -

    - your firmware is 3 versions behind, 1.0C is out now - http://forum.rpc1.org/dl_firmware.php?download_id=1596

    - wow, where's all that memory gone ?, your hard drive will start 'swapping'. Free up way more memory prior to burns by closing more programs down.

    - fyi, you're burning extremely close to outer edge of discs
     
    Last edited: Aug 3, 2005
  3. homer985

    homer985 Guest

    Thanks a bunch! That worked. Upgraded the Firmware, and it worked like a charm.

    Thanks again!
     
  4. Rotary

    Rotary Senior member

    Joined:
    Apr 10, 2003
    Messages:
    8,353
    Likes Received:
    0
    Trophy Points:
    116
    hi

    creaky i got love this guy!

    nice one mate
     
  5. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
    YAY another happy customer, happy burning


    tweak & burn
     
  6. Rotary

    Rotary Senior member

    Joined:
    Apr 10, 2003
    Messages:
    8,353
    Likes Received:
    0
    Trophy Points:
    116
    hi

    tweak and burn - excellant that is your catch phrase from now on thats great!

    love it - tweak and burn!

    they could call an ap that you know.....

    creaky the tweak and burn kid! the fastest nero logger in town!

     
    Last edited: Aug 4, 2005
  7. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
    i was jokin with ddp one day about his 'teach & learn' so i did tweak & burn for a laugh, so i use it whenever someone gets sorted out :)
     
  8. hackedoff

    hackedoff Member

    Joined:
    Aug 17, 2005
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    Hi all, I receive an illegal disc error as well! Trying to create a DVD data disk using TDK DVD-R disks. Have no clue on how to fix it so need your help!
    Logfile is posted below. Many thanks in advance!

    Windows 2000 5.0
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b

    Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 0 - 6.6.0.16
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <SONY DVD-ROM DDU1621 >Version: S3.5 - HA 1 TA 1 - 6.6.0.16
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD2000BB-00DAA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : SONY DVD-ROM DDU1621 atapi Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    _NEC DVD_RW ND-1300A F: CDRom0
    SONY DVD-ROM DDU1621 Z: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 334MB (342268kB)
    Memory in use : 34 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    17.8.2005
    ISO compilation
    16:06:26 #1 Text 0 File Isodoc.cpp, Line 6356
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 2 (Max. of 31 chars)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    16:06:26 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    16:06:26 #3 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    16:06:26 #4 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    16:06:26 #5 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 386703 ( 85:56.03, 755MB)

    16:06:26 #6 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    16:06:26 #7 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    16:06:26 #8 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    16:06:26 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 386704 (386704) = #386704/85:56.4
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 386704 blocks [_NEC DVD_RW ND-1300A]
    --------------------------------------------------------------

    16:06:26 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 791969792, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    386704 | lead-out | 1 | 0x41 | 0x00

    16:06:26 #11 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    16:06:28 #12 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    16:06:28 #13 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    16:06:28 #14 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2x (2,770 KB/s)

    16:06:28 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    16:06:28 #16 Text 0 File DVDR.cpp, Line 2379
    Recording mode: Sequential Recording Mode

    16:06:28 #17 Text 0 File Mmc.cpp, Line 21708
    Set BUFE: Buffer underrun protection -> ON

    16:06:28 #18 Text 0 File DVDR.cpp, Line 2534
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    16:06:28 #19 Text 0 File Cdrdrv.cpp, Line 8862
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 00 00 00 00 00 .`...0@P........
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    16:06:28 #20 SCSI -1046 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x05 0xE6 0x90 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    16:06:28 #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1771
    Illegal disc

    16:06:28 #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1771
    Could not perform start of Disc-at-once

    16:06:29 #23 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 19/06/2003 13:05:04 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  9. cougar_ii

    cougar_ii Regular member

    Joined:
    Aug 19, 2004
    Messages:
    1,961
    Likes Received:
    0
    Trophy Points:
    46
  10. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
    @hackedoff -

    other than your DMA being off, which cougar_ii has just pointed out, the burner's firmware is up to date, so all that's left to suggest is for you to try better media..
     
  11. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
    have requested thread be moved to Nero forum
     
  12. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    14,942
    Likes Received:
    1
    Trophy Points:
    116
    Teleported :)
     
  13. mhalfpen

    mhalfpen Member

    Joined:
    Nov 26, 2005
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Hey can anybody help with this illegal disc error in Nero.


    Here is the log file

    Thxs




    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 PM
    Nero Version: 6.6.0.13
    Internal Version: 6, 6, 0, 13c

    Recorder: <_NEC DVD_RW ND-1300A> Version: 1.08 - HA 2 TA 0 - 6.6.0.13
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <_NEC DVD_RW ND-1300A >Version: 1.08 - HA 2 TA 0 - 6.6.0.13
    Adapter driver: <> HA 2

    === Scsi-Device-Map ===
    DiskPeripheral : HITACHI_DK23CA-30 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TOSHIBA DVD-ROM SD-R2102 atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    TOSHIBA DVD-ROM SD-R2102 D: CDRom1
    _NEC DVD_RW ND-1300A E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 73400320 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 502MB (515052kB)
    Free physical memory: 206MB (211808kB)
    Memory in use : 58 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.11.2005
    ISO compilation
    10:02:18 AM #1 Text 0 File Isodoc.cpp, Line 6194
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    10:02:18 AM #2 Text 0 File Reader.cpp, Line 127
    Reader running

    10:02:18 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    10:02:18 AM #4 Text 0 File Burncd.cpp, Line 3167
    Turn on Disc-At-Once, using DVD media

    10:02:18 AM #5 Text 0 File DlgWaitCD.cpp, Line 260
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1515391 (336:45.16, 2959MB)

    10:02:18 AM #6 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    10:02:18 AM #7 Text 0 File DlgWaitCD.cpp, Line 2339
    Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
    Disc Manufacturer: SONY08 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    10:02:18 AM #8 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:02:18 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1515392 (1515392) = #1515392/336:45.17
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1515392 blocks [_NEC DVD_RW ND-1300A]
    --------------------------------------------------------------

    10:02:18 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3103522816, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1515392 | lead-out | 1 | 0x41 | 0x00

    10:02:19 AM #11 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    10:02:19 AM #12 Text 0 File Burncd.cpp, Line 4051
    Cache writing successful.

    10:02:19 AM #13 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    10:02:19 AM #14 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2.4x (3,324 KB/s)

    10:02:19 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    10:02:19 AM #16 Text 0 File DVDR.cpp, Line 2267
    Recording mode: Sequential Recording Mode

    10:02:19 AM #17 Text 0 File Mmc.cpp, Line 21469
    Set BUFE: Buffer underrun protection -> ON

    10:02:19 AM #18 Text 0 File DVDR.cpp, Line 2421
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:02:19 AM #19 Text 0 File Cdrdrv.cpp, Line 8438
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    10:02:19 AM #20 SCSI -1046 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x17 0x1F 0x80 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0B
    0x00 0x00 0x00 0x00 0x30 0x05

    10:02:19 AM #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1765
    Illegal disc

    10:02:19 AM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1765
    Could not perform start of Disc-at-once

    10:02:19 AM #23 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 01/02/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  14. attar

    attar Senior member

    Joined:
    Jun 17, 2005
    Messages:
    11,567
    Likes Received:
    33
    Trophy Points:
    128
    There is a newer firmware version V1.72 here.


    http://www.cdrinfo.com/Sections/Firmware/SingleModel.aspx?DriveId=745

    Might try that to start


    Also:
    You could update to 6.6.0.18

    Note: verify the drive manufacturer before upgrading firmware.It looks like the latest for your particular drive may be V1.0A.

    There is a list of recomended media at:

    http://72.14.207.104/search?q=cache...p/id/557/lang/ENG+NEC+ND-1300A+firmware&hl=en
     
    Last edited: Nov 26, 2005
  15. mhalfpen

    mhalfpen Member

    Joined:
    Nov 26, 2005
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Thxs, firmware upgrade worked like a charm.

    I found version 1.0C and it seems to work.
     
  16. attar

    attar Senior member

    Joined:
    Jun 17, 2005
    Messages:
    11,567
    Likes Received:
    33
    Trophy Points:
    128
    @mhalfpen
    Can you post a new Nero log for comparison?
     
  17. lieblm

    lieblm Member

    Joined:
    Dec 9, 2005
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    Hello,
    I've got problem with the "Illegal Disk" in Nero 6. My TEAC DVD-writer has latest firmware, I already burned some DVDs without problems. Now I use Verbatim media. I can burn on Verbatim CD-R ok but using Verbatim DVD-R gives me this error. I've studied this and thread and others and tried all the hints (including DMA reset) but with no success. Do you really think I just got bad Verbatim media packet?
    Here is the log file:

    Windows 2000 5.0
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21.12.2003 4:26:58
    ahead WinASPI: File 'C:\PROGRA~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16.12.2003 20:18:06
    Nero version: 6.3.1.17
    Recorder: <TEAC DV-W516G> Version: B4S6 - HA 1 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 11
    Drive is autodetected - recorder class: DVD+R9 DL recorder
    CD-ROM: <TEAC DV-W516G >Version: B4S6 - HA 1 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TEAC DV-W516G atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    TEAC DV-W516G E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 639MB (654836kB)
    Free physical memory: 379MB (388728kB)
    Memory in use : 40 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    9.12.2005
    UDF/ISO compilation
    13:10:32 #1 Phase 112 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation started

    13:10:32 #2 Phase 114 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation completed (no file modified)

    13:10:32 #3 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 2 (Max. of 31 chars)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    13:10:32 #4 Phase 111 File dlgbrnst.cpp, Line 1845
    DVD-Video files sorted

    13:10:32 #5 Text 0 File Reader.cpp, Line 118
    Reader running

    13:10:32 #6 Text 0 File Writer.cpp, Line 124
    Writer TEAC DV-W516G running

    13:10:32 #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    13:10:32 #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    13:10:33 #9 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    13:10:33 #10 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2278111 (506:14.61, 4449MB)

    13:10:33 #11 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO (enabled: CD)

    13:10:33 #12 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: TEAC DV-W516G, Media type: DVD-R
    Disc Manufacturer: MCC 03 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    13:10:33 #13 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    13:10:33 #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2278112 (2278112) = #2278112/506:14.62
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2278112 blocks [TEAC DV-W516G ]
    --------------------------------------------------------------

    13:10:33 #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TEAC DV-W516G ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4665573376, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2278112 | lead-out | 1 | 0x00 | 0x41

    13:10:33 #16 Phase 24 File dlgbrnst.cpp, Line 1845
    Caching of files started

    13:10:33 #17 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    13:10:33 #18 Phase 25 File dlgbrnst.cpp, Line 1845
    Caching of files completed

    13:10:33 #19 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 1x (1 385 KB/s)

    13:10:33 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    13:10:33 #21 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 56:14,542 (3374542ms) -> OK

    13:10:33 #22 Text 0 File DVDR.cpp, Line 1879
    Recording mode: Sequential Recording Mode

    13:10:33 #23 Text 0 File Mmc.cpp, Line 20401
    Set BUFE: BURN-Proof -> ON , Generic write control : ON

    13:10:33 #24 Text 0 File DVDR.cpp, Line 2020
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    13:10:33 #25 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    13:10:38 #26 SCSI -1046 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0E560000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    13:10:38 #27 CDR -1046 File Writer.cpp, Line 304
    Illegal disc

    13:10:38 #28 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    13:10:38 #29 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    13:10:38 #30 Text 0 File DVDR.cpp, Line 2256
    EndDAO: Last written address was -1

    13:10:38 #31 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    13:10:38 #32 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    13:10:38 #33 Phase 38 File dlgbrnst.cpp, Line 1845
    Burn process failed at 1x (1 385 KB/s)


    Existing drivers:
    File 'Drivers\CDR4_2K.SYS': Ver=2.5 (089), size=52720 bytes, created 2.3.2001 19:55:54
    File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1030), size=22585 bytes, created 2.3.2001 19:55:54
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 21.12.2003 4:26:57
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 31.5.2005 23:36:01 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 19.6.2003 12:05:04 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    Thanks for help!
     
  18. cougar_ii

    cougar_ii Regular member

    Joined:
    Aug 19, 2004
    Messages:
    1,961
    Likes Received:
    0
    Trophy Points:
    46
    Hi there,

    Your Nero version is outdated, it doesn't recognise your drive properly.

    Latest v6 Nero is v6.6.0.18
    or upgrade to v7.0.1.2

    You do have the latest firmware on your drive, so I would try to upgrade Nero.

    Media quality seems to be ok !

    These are Packet Writting drivers from Roxio, if you really don't use Direct CD, or whatever they call it now, [bold]get rid of it[/bold].

    They will cause you more problems that pleasure !



     
  19. Rotary

    Rotary Senior member

    Joined:
    Apr 10, 2003
    Messages:
    8,353
    Likes Received:
    0
    Trophy Points:
    116
    hi cougar

    you beat me to it on drivers...

    the roxio strikes again ...........................

    im still on v6 Nero is v6.6.0.13 all ok here.....
     
    Last edited: Dec 9, 2005
  20. lieblm

    lieblm Member

    Joined:
    Dec 9, 2005
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    Thanks for hints guys!
    However, still no success.
    I got rid of those Roxio drivers, updated Nero for 6.6.0.18, but the problem is still the same. Here is the log file for unsuccessful DVD write:
    Windows 2000 5.0
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21.12.2003 4:26:58
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 18:35:34
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <TEAC DV-W516G> Version: B4S6 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <TEAC DV-W516G >Version: B4S6 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TEAC DV-W516G atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    TEAC DV-W516G E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 639MB (654836kB)
    Free physical memory: 338MB (346644kB)
    Memory in use : 47 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    9.12.2005
    UDF/ISO compilation
    20:58:58 #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    20:58:59 #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    20:58:59 #3 Text 0 File Isodoc.cpp, Line 6359
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 2 (Max. of 31 chars)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    20:58:59 #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    20:58:59 #5 Text 0 File Reader.cpp, Line 127
    Reader running

    20:58:59 #6 Text 0 File Writer.cpp, Line 122
    Writer TEAC DV-W516G running

    20:58:59 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    20:58:59 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    20:58:59 #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    20:59:21 #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2278111 (506:14.61, 4449MB)

    20:59:21 #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    20:59:21 #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: TEAC DV-W516G, Media type: DVD-R
    Disc Manufacturer: MCC 03 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    20:59:21 #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD+R DL.)

    20:59:21 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2278112 (2278112) = #2278112/506:14.62
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2278112 blocks [TEAC DV-W516G]
    --------------------------------------------------------------

    20:59:21 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [TEAC DV-W516G] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4665573376, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2278112 | lead-out | 1 | 0x41 | 0x00

    20:59:21 #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    20:59:21 #17 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    20:59:21 #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    20:59:21 #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 1x (1 385 KB/s)

    20:59:21 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    20:59:21 #21 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    20:59:21 #22 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: BURN-Proof -> ON , Adapt writespeed to disc : ON

    20:59:21 #23 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    20:59:21 #24 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    20:59:23 #25 SCSI -1046 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0A6C0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    20:59:23 #26 CDR -1046 File Writer.cpp, Line 311
    Illegal disc

    20:59:23 #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    20:59:23 #28 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    20:59:23 #29 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was -1

    20:59:23 #30 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 1x (1 385 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 21.12.2003 4:26:57
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 31.5.2005 23:36:01 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 19.6.2003 12:05:04 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    I again to write on CD (Vermatim brand as well) and it went *almost* ok, I got an error when verifying data. However, the data on the disk seems to be ok, I copied the again on the disk and verified ok. Here is the session log for this CD write session:

    indows 2000 5.0
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21.12.2003 4:26:58
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 18:35:34
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e
    (Nero Express)
    Recorder: <TEAC DV-W516G> Version: B4S6 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <TEAC DV-W516G >Version: B4S6 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TEAC DV-W516G atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    TEAC DV-W516G E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 639MB (654836kB)
    Free physical memory: 295MB (303020kB)
    Memory in use : 53 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.12.2005
    CD-ROM (ISO)
    12:18:17 #1 Text 0 File Isodoc.cpp, Line 6359
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : TAO
    Mode : 1
    ISO Level : 2 (Max. of 31 chars)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    12:18:17 #2 Text 0 File Burncd.cpp, Line 2948
    TEAC DV-W516G
    BURN-Proof activated

    12:18:17 #3 Text 0 File Reader.cpp, Line 127
    Reader running

    12:18:17 #4 Text 0 File Writer.cpp, Line 122
    Writer TEAC DV-W516G running

    12:18:17 #5 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    12:18:17 #6 Text 0 File Burncd.cpp, Line 3233
    Turn on Track-At-Once, using CD-R/RW media

    12:18:18 #7 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 359848 ( 79:59.73)
    Last address to be written: 358845 ( 79:46.45)

    12:18:18 #8 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    12:18:18 #9 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: TEAC DV-W516G;
    CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
    ATIP Data:
    Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
    Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

    12:18:18 #10 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:18:18 #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 358846 (358846) = #358846/79:44.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358844 blocks [TEAC DV-W516G]
    --------------------------------------------------------------

    12:18:18 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [TEAC DV-W516G] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 735223808, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    -150 | lead-in | 0 | 0x41 | 0x00
    -150 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    358846 | lead-out | 1 | 0x41 | 0x00

    12:18:18 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
    Removed 2 run-out blocks from end of track 1. Length: 358846 -> 358844.

    12:18:18 #14 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    12:18:18 #15 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    12:18:18 #16 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    12:18:18 #17 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 8x (1 200 KB/s)

    12:18:18 #18 SCSI -1189 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03E75000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x02
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x02

    12:18:18 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:18:18 #20 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: BURN-Proof -> ON , Adapt writespeed to disc : ON

    12:28:27 #21 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    12:28:30 #22 Text 0 File Mmc.cpp, Line 16452
    <TEAC DV-W516G > start Close Session

    12:29:05 #23 Phase 37 File dlgbrnst.cpp, Line 1832
    Burn process completed successfully at 8x (1 200 KB/s)

    12:29:05 #24 Phase 78 File dlgbrnst.cpp, Line 1832
    Data verification started

    12:29:08 #25 Text 0 File ThreadedTransferInterface.cpp, Line 1119
    Removed 2 run-out blocks from end of track 1. Length: 358846 -> 358844.

    12:31:31 #26 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    12:31:31 #27 SectorVerify 11 File Cdrdrv.cpp, Line 9998
    Sector 314734 on disc has different content to source

    12:31:32 #28 Phase 81 File dlgbrnst.cpp, Line 1832
    Data verification failed


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 21.12.2003 4:26:57
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 31.5.2005 23:36:01 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 19.6.2003 12:05:04 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    Do you think I really have to upgrade to v7 of Nero? Or should I try another burning sw (like DeepBurner)?
    If you find anything interesting in the log files, please let me know. And thanks for the help anyway, it is great to have this chance of sharing experience!
     

Share This Page