it is a image of a video I grabbed from a WinTV-PVR-150 card and then created my own DVD. once again though the same image burns perfectly fine to a DVD+R
================== whompus Yes. You are correct. THe disc finished verifying and was perfectly good. ==================== As an update on the thought that the image was bad. I created a new quick DVD from a different video. When I try to burn straight to the DVD on a -R disc, I get the following error after it starts burning the lead in Nerovision.exe application error "the instruction at "oxoo6b6ce4" referenced memory at "0x01553840". The memory could not be "read". " Does anyone know if that is referencing memory on the DVD writer or memory on the computer? I ran prime 95 for a few hours yesterday with no errors. THanks for your help!
I think thats referancing memory on the computer thats been alocated for the buffer. I think that address is to high for memory in the burner. I still cant figure why it can be accessed for +disk but not for -disk
Something else we didnt think of. Are you attempting to book type the dvd? -dvd can not be book typed and with the app not completly recognizing the media it may be attempting to if you have the setting for book type on.
No, I'm not trying to book type it. I've looked into it using the lite-on utility but my impression is that you can not booktype a -R with their utility. So to the best of my knowledge I am not trying to. Specifically from Nero I am not or the Imgburn program.
This has happened the second time since I used my laptop from September. I use imation 8x DVD+R discs in both cases, and at first I burnt them sucessfully, enabling multisession. When I want to add some other files later, in both cases they failed with the illegal disc error, and although in both cases the same stuff was still in the discs when you view it through Nero Express it shows that it's empty. I use Nero 6.6.0.5. Here's the log: ====== *** Nero-Burning Rom, History File *** ====== Angus Tse 1A23-[bold]serial number removed[/bold] Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34 Nero version: 6.6.0.5 (Nero Express) Recorder: <MATSHITA DVD-RAM UJ-832S>Version: 1.02 - HA 0 TA 1 - 6.6.0.5 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <MATSHITA DVD-RAM UJ-832S >Version: 1.02 - HA 0 TA 1 - 6.6.0.5 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === DiskPeripheral : HTS541080G9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : MATSHITA DVD-RAM UJ-832S atapi Port 0 ID 1 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 1 ID 0 DMA: Off === CDRom-Device-Map === MATSHITA DVD-RAM UJ-832S D: CDRom0 Generic DVD-ROM E: CDRom1 SAMSUNG DVD-ROM SD-616F F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523632kB) Free physical memory: 90MB (93036kB) Memory in use : 82 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.1.2006 ISO compilation 19:24:14 #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Continue multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 19:24:14 #2 Text 0 File Reader.cpp, Line 127 Reader running 19:24:14 #3 Text 0 File Writer.cpp, Line 122 Writer MATSHITA DVD-RAM UJ-832S running 19:24:14 #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 19:24:15 #5 Text 0 File Burncd.cpp, Line 3155 Turn on Disc-at-once, using DVD media 19:24:21 #6 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1795561 (399:00.61, 3506MB) 19:24:21 #7 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO (enabled: CD) 19:24:21 #8 Text 0 File DlgWaitCD.cpp, Line 2310 Recorder: MATSHITA DVD-RAM UJ-832S, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 19:24:21 #9 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= 19:24:21 #10 Text 0 File ThreadedTransferInterface.cpp, Line 829 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 358768 (358768) = #358768/79:43.43 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358768 blocks [MATSHITA DVD-RAM UJ-832S] -------------------------------------------------------------- 19:24:21 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042 Prepare recorder [MATSHITA DVD-RAM UJ-832S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 4 to 4: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 734756864, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 1436944 | lead-in | 0 | 0x41 | 0x00 1436944 | 4 | 0 | 0x41 | 0x00 1436944 | 4 | 1 | 0x41 | 0x00 1795712 | lead-out | 1 | 0x41 | 0x00 19:24:23 #12 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 19:24:23 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2604 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #1436944 19:24:23 #14 Text 0 File Cdrdrv.cpp, Line 8332 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific [16..63]: 00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8 23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 19:24:23 #15 Text 0 File DVDPlusRW.cpp, Line 606 Start write address at LBA 1436944 DVD high compatibility mode: No 19:26:54 #16 SCSI -400 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x099A0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x03 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x1A 0x40 0xF0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF1 0x00 0x04 0x00 0x1A 0x3E 0x00 0x0A 0x00 0x39 0x00 0x00 0x03 0x03 19:26:55 #17 CDR -400 File Writer.cpp, Line 311 Unspecified target error 19:26:55 #18 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 19:26:55 #19 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 19:26:55 #20 SCSI -1046 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x04 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x83 0x00 0x00 0x30 0x05 19:26:55 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x83 0x00 0x00 0x30 0x05 19:26:55 #22 CDR -1046 File WriterStatus.cpp, Line 167 Illegal disc 19:26:55 #23 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 19:26:55 #24 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 22:28:13 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:44 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
@sadist - i've edited out your serial number.. For Imation (ugh!) see here for reasons not to use their 'disks' - http://forums.afterdawn.com/thread_view.cfm/232406 - Nero's too old, latest 6.x version is 6.6.0.18, download "update package 1" from here - http://ww2.nero.com/enu/nero-up.php - newer version of your firmware, 1.03 is here - http://forum.rpc1.org/dl_firmware.php?download_id=2180 - sufficient total memory but no free memory, you need to close down more programs prior to ALL dvd work/burning to ensure sufficient free memory - what can i say, these are some of the most awful atrocious, utter rubbish dvd media you can buy, and you bought them! (sorry but they're awful, see the link i pasted at beginning of reply where CMC discs play the starring roles) - see previous comment - see previous comment
Yeah I know, I soon realised that when my drive cannot be flashed so there won't be region protection. It came with my HP laptop, so I defiently didn't choose it. Is the firmware you linked to official, and should I install it (since I don't use a sony laptop)? Also, so can the problem really be fixed at all? I use imation discs all the time, and had no problems with my desktop PC with the same version of Nero. Is it the drive's problem?
@sadist - you'd need to go with HP's website for firmware then. the discs you're using at the moment are being detected correctly by the firmware (at the moment) so just keep the firmware in mind for now. I attack the whole of a logfile you see, i comment on what i see, even if it seems irrelevant to the person posting the problem. Still read that Imation link as those discs are awful for one helluva lot of ppl. I take media very seriously and burn discs like it's going out of fashion so know what it means to be caught out by companies such as these, that's all. In fact here's a snippet re CMC media that i wrote today to http://forums.afterdawn.com/thread_view.cfm/276843 -
any other ideas or suggestions for troubleshooting for the problems I'm experiencing? I apprecieate the comments and suggestions by Rotary and Whompus. My only other thought is to pick up a DVD writer from somebody or buy one and see if that does anything. The ability to write to a DVD+R and not to a DVD-R just seems peculiar.
yeah??? as you me and whompus think very confusing? it almost pionts to a defective drive on -R discs? but i would try a new brand type media in -R before i bought anew drive...
I happened to find a DVD-R disc which came with the drive and it failed. So I might just try to get a test drive. I'll let you know the results. Thanks for your help and input!
Nero Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <_NEC DVD+RW ND-3100AD> Version: 107E - HA 1 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <_NEC DVD+RW ND-3100AD>Version: 107E - HA 1 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y160M0 iaStor Port 0 ID 0 DMA: On CdRomPeripheral : SONY CD-RW CRX216E atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD+RW ND-3100AD atapi Port 1 ID 1 DMA: On CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off === CDRom-Device-Map === SONY CD-RW CRX216E D: CDRom0 _NEC DVD+RW ND-3100AD E: CDRom1 SCSIVAX DVD/CD-ROM F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1046620kB) Free physical memory: 387MB (396832kB) Memory in use : 62 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.1.2006 UDF/ISO compilation 8:10:23 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 8:10:23 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 8:10:23 AM #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 8:10:23 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 8:10:24 AM #5 Text 0 File Reader.cpp, Line 127 Reader running 8:10:24 AM #6 Text 0 File Writer.cpp, Line 122 Writer _NEC DVD+RW ND-3100AD running 8:10:24 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 8:10:24 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 8:10:24 AM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 8:10:24 AM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1746527 (388:07.02, 3411MB) 8:10:24 AM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 8:10:24 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: _NEC DVD+RW ND-3100AD, Media type: DVD+R 8:10:24 AM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:10:24 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1746528 (1746528) = #1746528/388:7.3 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1746528 blocks [_NEC DVD+RW ND-3100AD] -------------------------------------------------------------- 8:10:24 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [_NEC DVD+RW ND-3100AD] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3576889344, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1746528 | lead-out | 1 | 0x41 | 0x00 8:10:24 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 8:10:24 AM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 8:10:24 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 8:10:24 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 8:10:24 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:10:24 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0C5F0600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 8:10:24 AM #22 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 8:10:25 AM #23 SCSI -1046 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0BF40000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 8:10:25 AM #24 CDR -1046 File Writer.cpp, Line 311 Illegal disc 8:10:25 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:10:25 AM #26 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 8:10:25 AM #27 SCSI -1046 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 8:10:25 AM #28 SCSI -1046 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 8:10:25 AM #29 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 8:10:25 AM #30 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 8:10:25 AM #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 3/3/2004 1:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) P.S. I also am using Fujifilm dvd+r's which worked fine until I bought a new pack of them last night. It seems that the new pack does not like my burner. Thanks for all your help
@XeroTAO - - 107E was last version, dated Oct 2004!! so the firmware is way out of date to cope with newer media..see here - http://forum.rpc1.org/dl_firmware.php?download_id=1968 http://www.micheldeboer.nl/firmware - your blanks discs aren't being recognised, due to the firmware being so old. this is similar to what you should see - - ie a 3line paragraph when the firmware's up to date. Your new discs are newer than the burner's firmware knows what to do with as it's out of date and neglected by the manufacturer. it happens sometimes when newer burners are manufactured, they let some drives' firmware slip by the wayside. - see previous comment
I used the modified firmware based off a Mad Dog 2.f9 which seems to be same one as Liggy's 3100@3500 conversion and everything seems to be working fine now. so thanks again for the help.
A follow up to the problem I was experiencing of being able to write to DVD +R and not to DVD-R's. It turns out that it was in fact the DVD burner that was bad. I bought a newer Lite-on and installed it last night. I was able to burn the image to the same DVD-R media as befoer and it burned just fine. Thanks to whompus and rotary for your help. I'm assuming it is probably not worth sending the drive back to Lite-on to see if they can repair it. It is about 14 months old now.
COULD YOU PLEASE SOMEONE HELP ME.... I have got nearly same problem.. but in 5 months nobody didn't fix it ( technic services ) XXXXXXXXXX 1A20XXXXXXXXXXXXX Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: < DVD+RW RW8165> Version: 1.03 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: < DVD+RW RW8165 >Version: 1.03 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : FUJITSU MHT2080AT atapi Port 0 ID 0 DMA: On CdRomPeripheral : DVD+RW RW8165 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === DVD+RW RW8165 F: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523628kB) Free physical memory: 10MB (10960kB) Memory in use : 97 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.1.2006 ISO compilation 2:59:07 PM #1 Text 0 File Isodoc.cpp, Line 6359 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 2:59:08 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 2:59:08 PM #3 Text 0 File Writer.cpp, Line 122 Writer DVD+RW RW8165 running 2:59:08 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 2:59:11 PM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 2:59:12 PM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2069951 (459:59.26, 4042MB) 2:59:12 PM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 2:59:12 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: DVD+RW RW8165, Media type: DVD+R 2:59:12 PM #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:59:12 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2069952 (2069952) = #2069952/459:59.27 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2069952 blocks [DVD+RW RW8165] -------------------------------------------------------------- 2:59:25 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [DVD+RW RW8165] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4239261696, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2069952 | lead-out | 1 | 0x41 | 0x00 2:59:25 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 3:00:17 PM #13 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 3:00:17 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 3:00:17 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 3:00:18 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:00:18 PM #17 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0DBC0600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 3:00:18 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xF9 0x15 0xA1 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 3:00:18 PM #19 Text 0 File DVDR.cpp, Line 6168 Drive: DVD+RW RW8165 Book Type request [gen]: Physical disc type, write to EEPROM Changing the Book Type was finished successfully, return code 0 3:00:18 PM #20 CDR -1207 File DVDR.cpp, Line 5306 Book Type automatically set to: Physical disc type 3:00:18 PM #21 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: No 3:01:00 PM #22 SCSI -1046 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0D020000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x30 0x05 3:01:00 PM #23 CDR -1046 File Writer.cpp, Line 311 Illegal disc 3:01:00 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:01:00 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 3:01:01 PM #26 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 3:01:01 PM #27 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A15200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 3:01:01 PM #28 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xF9 0x15 0xA1 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 3:01:01 PM #29 Text 0 File DVDR.cpp, Line 6168 Drive: DVD+RW RW8165 Book Type request [gen]: ?, write to EEPROM Changing the Book Type was finished successfully, return code 0 3:01:01 PM #30 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 3:01:02 PM #31 Text 0 File DVDR.cpp, Line 6168 Drive: DVD+RW RW8165 Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 3:01:02 PM #32 CDR -1066 File WriterStatus.cpp, Line 167 Invalid field in command 3:01:02 PM #33 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 3:01:03 PM #34 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 10:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
