@ambaytek - - your blanks discs aren't being recognised, due to the firmware being so old. this is similar to what you should see - - ie a 3line paragraph when the firmware's up to date. Your discs are newer than the burner's firmware knows what to do with as it's out of date. As per cougar_ii you need to try 1.03, but 1.03 was dated April 2004!!, so even the latest version of firmware is way out of date to cope with newer media..
hi there been having the same problem with nero wondering if someone would take a look at my log file thanks Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.1.4 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: Ahead\Nero Recode Internal Version: 7, 0, 1, 4 Recorder: <SONY DVD RW DW-D22A> Version: BYS2 - HA 1 TA 0 - 7.0.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : Maxtor 6B200M0 atapi Port 2 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 3 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-ROM GCR-8523B atapi Port 3 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 2 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 3 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.1b axvscsi Port 5 ID 0 DMA: Off === CDRom-Device-Map === SONY DVD RW DW-D22A D: CDRom0 HL-DT-ST CD-ROM GCR-8523B E: CDRom1 Generic DVD-ROM F: CDRom2 Generic DVD-ROM G: CDRom3 Generic DVD-ROM H: CDRom4 Generic DVD-ROM I: CDRom5 AXV CD/DVD-ROM CDRom6 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047276kB) Free physical memory: 278MB (285076kB) Memory in use : 72 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.1.2006 NeroAPI 4:45:04 PM #1 Phase 112 File APIProgress.cpp, Line 278 DVD-Video files reallocation started 4:45:04 PM #2 Phase 114 File APIProgress.cpp, Line 278 DVD-Video files reallocation completed (no file modified) 4:45:04 PM #3 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 4:45:04 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 262144KB of Memory 4:45:04 PM #5 Text 0 File Reader.cpp, Line 124 Reader running 4:45:04 PM #6 Text 0 File Writer.cpp, Line 113 Writer D: SONY DVD RW DW-D22A running 4:45:04 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 4:45:04 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 4:45:04 PM #9 Text 0 File Burncd.cpp, Line 3342 Turn on Disc-At-Once, using DVD media 4:45:05 PM #10 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2197247 (488:16.47, 4291MB) 4:45:05 PM #11 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 4:45:05 PM #12 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: SONY DVD RW DW-D22A, Media type: DVD-R Disc Manufacturer: RITEKG - 05 Disc Application Code: 64, Disc Physical Code: 193 4:45:05 PM #13 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:45:05 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2197248 (2197248) = #2197248/488:16.48 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2197248 blocks [D: SONY DVD RW DW-D22A] -------------------------------------------------------------- 4:45:05 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: SONY DVD RW DW-D22A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4499963904, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2197248 | lead-out | 1 | 0x41 | 0x00 4:45:25 PM #16 Text 0 File SCSIPassThrough.cpp, Line 58 Error on LockVolume: Incorrect function. 4:45:25 PM #17 Text 0 File SCSIPassThrough.cpp, Line 119 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 4:45:25 PM #18 Text 0 File Cdrdrv.cpp, Line 9597 SPTIDismountVolume not successfull 4:45:45 PM #19 Text 0 File SCSIPassThrough.cpp, Line 58 Error on LockVolume: Incorrect function. 4:45:45 PM #20 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 4:45:45 PM #21 Text 0 File Burncd.cpp, Line 4176 Cache writing successful. 4:45:45 PM #22 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 4:45:45 PM #23 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 4:45:45 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:45:45 PM #25 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode 4:45:45 PM #26 Text 0 File MMC.cpp, Line 21611 Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON 4:45:45 PM #27 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 4:45:45 PM #28 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 4:46:20 PM #29 Text 0 File Cdrdrv.cpp, Line 1197 16:46:20.656 - D: SONY DVD RW DW-D22A : Queue again later 4:49:34 PM #30 SPTI -1046 File SCSIPassThrough.cpp, Line 323 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 00 00 00 0D 20 00 00 20 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05 Buffer x078c0000: Len x10000 0x00 00 01 BA 44 00 85 A4 94 AB 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 62 10 1A C5 6F 9C 34 03 30 0x03 9D C2 C0 0F C0 2D 70 B1 B0 68 0E B8 68 02 A0 4:49:34 PM #31 CDR -1046 File Writer.cpp, Line 302 Illegal disc D: SONY DVD RW DW-D22A 4:49:34 PM #32 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 4:49:34 PM #33 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 4:49:34 PM #34 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was 3359 4:49:34 PM #35 Phase 38 File APIProgress.cpp, Line 278 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=7.5.0.47 , size=24960 bytes, created 3/8/2005 9:08:42 PM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 11/5/2005 1:04:50 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 16:49:47 File NeroRecorderBase.cpp, Line 936 Burn failed (3) 16:49:47 File burn_dvdfiles.cpp, Line 301 Compile DVD: exit
@chel0921 - - version BYS3 of your burner's firmware (dated 17th Nov 2004) is here - http://dhc014.rpc1.org/indexOEM.htm#DW-D22A That's real old now, the drive is not gonna be able to recognise all newer media - DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm - something's using up most of your memory - hmmm, dunno what this means, i'll hve to google for it - follow ALL suggestions - try 4x - CDRALW2K.SYS is part of Roxio. try uninstalling Roxio (doesn't always play well with Nero), then you might need to fully remove using Roxio Zapper - http://www.microadvantage.net/utilities
thanks i'll try all these things n get back 2 u only thing is ive ran out of discs trying to get it to work lol
hi Error on LockVolume: Incorrect function. SPTI Dismount Volume not successfull ------------------------------------------------- spti < ---- a driver issue? i know dvd decrypter uses spti this looks like yor virtual drives are locking access!!! or ROXIO ?!?!
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 2 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 3 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.1b axvscsi Port 5 ID 0 DMA: Off
hi creaky love that sig mate - very kool... yes it was an educated guess (hehe), and its what i would do first off for sure...
hi could be new nero i personally wont use v7 NT-SPTI used Nero API version: 7.0.1.4 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: Ahead\Nero Recode Internal Version: 7, 0, 1, 4 -------------------- dont forget all creaky tweaks!!!!!!!
Hi I originally had nero 6 but decided to buy 7 had the same problem with 6 thats why i got 7 worked fine for a few months then just stopped working very strange!
Hey gang, First time poster here and new to DVD burning. I'm having an issue trying to burn data (pictures in particular)to a DVD. I have been through the forums trying to see if there are any issues like I am having and this seems to be the closest. I have looked at my log file and compared what others have done to resolve there issues. From what I understand the following are not issues Ram - Physical memory: 1023MB (1048052kB) Free physical memory: 563MB (577400kB) Memory in use: 44 % Firmware - LITE-ON DVDRW SHW-160P6S>Version: PS08 Nero - 6.6.0.18 DMA - CdRomPeripheral:LITE-ON DVDRW SHW-160P6S atapi Port 1 ID 0 DMA: On Write address - Last possible write address on media:2298495 510:46.45, 4489MB) Last address to be written:745055 (165:34.05, 1455MB) Media - Media type: DVD-R Disc Manufacturer: FUJIFI - LM03 Any help would be greatly appreciated Reb Here is a copy of the complete log file: ***** ***** 1A**-****-****-****-****-***** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <LITE-ON DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <LITE-ON DVDRW SHW-160P6S>Version: PS08 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD200BB-00AUA1 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD200BB-00AUA1 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW SHW-160P6S atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === LITE-ON DVDRW SHW-160P6S E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048052kB) Free physical memory: 563MB (577400kB) Memory in use : 44 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.1.2006 ISO compilation 10:49:29 PM #1 Text 0 File Isodoc.cpp, Line 6359 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:49:29 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 10:49:29 PM #3 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SHW-160P6S running 10:49:29 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:49:29 PM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:49:30 PM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 745055 (165:34.05, 1455MB) 10:49:30 PM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:49:30 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R Disc Manufacturer: FUJIFI - LM03 Disc Application Code: 64, Disc Physical Code: 193 10:49:30 PM #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:49:30 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 745056 (745056) = #745056/165:34.6 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 745056 blocks [LITE-ON DVDRW SHW-160P6S] -------------------------------------------------------------- 10:49:30 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1525874688, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 745056 | lead-out | 1 | 0x41 | 0x00 10:49:30 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:49:38 PM #13 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 10:49:38 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:49:38 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 10:49:38 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:49:38 PM #17 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 10:49:38 PM #18 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON 10:49:38 PM #19 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 10:49:38 PM #20 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:49:45 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BB50000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 10:49:45 PM #22 CDR -1046 File Writer.cpp, Line 311 Illegal disc 10:49:45 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:49:45 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:49:45 PM #25 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was -1 10:49:45 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
hi may just be the discs used? i havent heasrd of those ones? Disc Manufacturer: FUJIFI - LM03 try get some known good decent media
