I burned a bunch of disc a cuople months ago with the same blanks and no problem. I go to burn another DVD today and waste 4 disc with same error. See below. Please help. I can't think of anything that has changed in last 2 months to make it not work. Blanks are from same 50 pack I was using earlier. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 10:35:32 AM Nero API version: 6.6.0.8 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <Memorex DVD16+/-DL4RWlD2>Version: JWS6 - HA 2 TA 0 - 6.6.0.8 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK6026GAX atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CDRW/DVD GCC4244 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST CDRW/DVD GCC424 D: CDRom0 Memorex DVD16+/-DL4RWlD2 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 503MB (515452kB) Free physical memory: 157MB (161192kB) Memory in use : 68 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.12.2006 NeroAPI 1:45:09 AM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 1:45:09 AM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 1:45:09 AM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 1:45:09 AM #4 Text 0 File Reader.cpp, Line 127 Reader running 1:45:09 AM #5 Text 0 File Writer.cpp, Line 122 Writer Memorex DVD16+/-DL4RWlD2 running 1:45:09 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 1:45:09 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 1:45:10 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 1:45:10 AM #9 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 1:45:10 AM #10 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286127 (508:01.52, 4465MB) 1:45:10 AM #11 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO 1:45:10 AM #12 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: Memorex DVD16+/-DL4RWlD2, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 1:45:10 AM #13 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:45:10 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [Memorex DVD16+/-DL4RWlD2] -------------------------------------------------------------- 1:45:10 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Memorex DVD16+/-DL4RWlD2] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286128 | lead-out | 1 | 0x41 | 0x00 1:45:13 AM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 1:45:13 AM #17 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 1:45:13 AM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 1:45:13 AM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 16x (22,160 KB/s) 1:45:13 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 1:45:13 AM #21 Text 0 File DVDR.cpp, Line 2241 Recording mode: Sequential Recording Mode 1:45:13 AM #22 Text 0 File Mmc.cpp, Line 21319 Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON 1:45:13 AM #23 Text 0 File DVDR.cpp, Line 2387 Start write address at LBA 0 DVD high compatibility mode: Yes 1:45:13 AM #24 Text 0 File Cdrdrv.cpp, Line 8430 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 1:46:06 AM #25 Text 0 File Cdrdrv.cpp, Line 1287 01:46:06.531 - Memorex DVD16+/-DL4RWlD2\H2 T0 : Queue again later 1:48:13 AM #26 SCSI -1046 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x011A0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x48 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 1:48:13 AM #27 CDR -1046 File Writer.cpp, Line 311 Illegal disc 1:48:13 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:48:13 AM #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 1:48:13 AM #30 Text 0 File DVDR.cpp, Line 2650 EndDAO: Last written address was 18463 1:48:13 AM #31 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 16x (22,160 KB/s) 1:48:14 AM #32 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 1:48:14 AM #33 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/12/2005 5:54:10 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 5:08:02 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 5:07:34 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 5:08:08 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi brooks20 Even though your firmware is up to date looks like your drive doesn't like the Ritek 16x (memorex maybe?) you are using - may be hit or miss. See them pop up alot in failed burn logs. Better to use would be Verbatim or made in Japan Sony, Fuji or Maxell. Take the burn speed down to 8x also. File 'Drivers\InCDfs.SYS': May or may not be playing into this problem but Nero's InCD can sometimes cause conflicts. If you're not using it uninstall it and run the CleanTool. Nero API version: 6.6.0.8 Nero can use an update to - update to 6.6.0.18. Here's the links: Package 1 Package 2 (Recode, Vision)
Thanks for the help, but I used same disc and 16x a month ago with no problems. So it can't be that. I am lost
If as binkie7 has suggested your discs are made by memorex then you DO have a problem with them. binkie7 knows what she is talking about so I'll just refer you to this thread about crappy discs, http://forums.afterdawn.com/thread_view.cfm/262544
I bought a case of 50 and had no trouble with the first 20. then 4 in a row burn bad after I don't use it for a month?
Thats exactly what that reference is all about, have a read of it and you'll find how "fickle" el cheapo discs can be!!
I downloaded the update and tried my 5th disc. Got this one from 2nd from bottom. Same result. Oddly, it is burning to the same spot everytime (about a half inch from center) and I have tried copying other dvd's also and still stops the same place. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <Memorex DVD16+/-DL4RWlD2>Version: JWS6 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK6026GAX atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CDRW/DVD GCC4244 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST CDRW/DVD GCC4244 D: CDRom0 Memorex DVD16+/-DL4RWlD2 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 503MB (515452kB) Free physical memory: 130MB (134024kB) Memory in use : 73 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.12.2006 NeroAPI 5:02:47 AM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 5:02:47 AM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 5:02:47 AM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 5:02:47 AM #4 Text 0 File Reader.cpp, Line 127 Reader running 5:02:47 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 5:02:47 AM #6 Text 0 File Writer.cpp, Line 122 Writer Memorex DVD16+/-DL4RWlD2 running 5:02:47 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 5:02:47 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 5:02:47 AM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 5:03:50 AM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286127 (508:01.52, 4465MB) 5:03:50 AM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 5:03:50 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: Memorex DVD16+/-DL4RWlD2, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 5:03:50 AM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.) 5:03:50 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [Memorex DVD16+/-DL4RWlD2] -------------------------------------------------------------- 5:03:50 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [Memorex DVD16+/-DL4RWlD2] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286128 | lead-out | 1 | 0x41 | 0x00 5:03:50 AM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 5:03:50 AM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 5:03:50 AM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 5:03:50 AM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 16x (22,160 KB/s) 5:03:50 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:03:50 AM #21 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 5:03:50 AM #22 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON 5:03:50 AM #23 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 5:03:50 AM #24 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 5:04:52 AM #25 Text 0 File Cdrdrv.cpp, Line 1288 05:04:52.671 - Memorex DVD16+/-DL4RWlD2\H2 T0 : Queue again later 5:07:24 AM #26 SCSI -1046 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x00DD0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x22 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 5:07:24 AM #27 CDR -1046 File Writer.cpp, Line 311 Illegal disc 5:07:24 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 5:07:24 AM #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 5:07:24 AM #30 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was 8927 5:07:24 AM #31 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 16x (22,160 KB/s) 5:07:24 AM #32 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 5:07:24 AM #33 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/12/2005 5:54:10 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 5:08:02 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 5:07:34 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 5:08:08 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi, You have InCD Installed. It clashes with Nero itsself, so run this tool to get rid of it. http://ww2.nero.com/nero6/eng/InCD_Clean_Tool.html Also, Your mem usage is v high. Don't multitask/run anything whilst burning... YOu're burning too fast on those crappy disks of yours... If you won't buy new media, like reccomended (by, now, 3 members), then burn @ 4-8x speed!
@brooks20 Change the burn speed in Shrink. When you click backup - click on the burn settings tab to take the speed down. As posted earlier Ritek 16x pops up alot in failed burn logs even with updated firmware on the burner. Consistency may also not be the same throughout the spindle. That's why we recommend the tried and true brands that we do.
I'll try that, but the thing I can't get over is that I didn't have any problems a month ago and now nothing will burn. Something's different with my computer.
Try the lower speed - just because a disc says it's rated 16x doesn't mean that's the best speed to burn it at. Keeping up on the pc maintenace bit? Like disc cleanup, defrag, virus and spyware scans? Give the free ImgBurn a go to burn. Use the build mode to burn the video_ts folder. You can also get a log from it - just press 'L' before you begin.
I just burnt a disc i burnt last month at 16x with no problems. So, that means there is something wrong the disc I am copying. Thoughts?
Tried burning a new movie after success with the one I burned last month and got this. What about that high compatability mode? What's that. 1A20-022N-0530-1538-9943-0478* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.18 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 18e Recorder: <Memorex DVD16+/-DL4RWlD2>Version: JWS6 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK6026GAX atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CDRW/DVD GCC4244 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST CDRW/DVD GCC4244 D: CDRom0 Memorex DVD16+/-DL4RWlD2 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 503MB (515452kB) Free physical memory: 106MB (108880kB) Memory in use : 78 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.12.2006 NeroAPI 11:09:41 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 11:09:41 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 11:09:41 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 11:09:42 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 11:09:42 PM #5 Text 0 File Writer.cpp, Line 122 Writer Memorex DVD16+/-DL4RWlD2 running 11:09:42 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 11:09:42 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:09:42 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:09:42 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 11:09:43 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286127 (508:01.52, 4465MB) 11:09:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 11:09:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: Memorex DVD16+/-DL4RWlD2, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 11:09:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:09:43 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [Memorex DVD16+/-DL4RWlD2] -------------------------------------------------------------- 11:09:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [Memorex DVD16+/-DL4RWlD2] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286128 | lead-out | 1 | 0x41 | 0x00 11:09:44 PM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 11:09:44 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 11:09:44 PM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 11:09:44 PM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 16x (22,160 KB/s) 11:09:44 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:09:44 PM #21 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 11:09:44 PM #22 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON 11:09:44 PM #23 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 11:09:44 PM #24 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:10:34 PM #25 Text 0 File Cdrdrv.cpp, Line 1288 23:10:34.078 - Memorex DVD16+/-DL4RWlD2\H2 T0 : Queue again later 11:17:25 PM #26 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x011A0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x22 0x4B 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 11:17:25 PM #27 CDR -1135 File Writer.cpp, Line 311 Write error 11:17:25 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:17:25 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:17:25 PM #30 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was 2247583 11:17:25 PM #31 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 16x (22,160 KB/s) 11:17:25 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 11:17:25 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/12/2005 5:54:10 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
The whole movie burned perfectly except the credits. It starts skipping right at when the credits start. This is different because before it didn't work at all.
If you continue to burn at this speed then you WILL get failed burns, as previously advised, slow burn to 4X.
Hi all Forgive me, I'm not as savvy as most of you at this.....I have a Dell Latitude w/ a SONY DVD+-RW DW-D56A, running Nero 7 (7.00.1461). It seems like my firmware is current. I can burn CD-Rs but when I try to burn DVD-R discs I get a illegal disc failure message, having tried 2 diffent brands of discs. My log is below; can anyone (please) make any sense of it? Thanks much for any advice/help!! 5C82001080100000000140876647 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.1.2 Internal Version: 7, 0, 1, 2 (Nero Express) Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7 - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <IVI Virtual CD >Version: 0.5a - HA 1 TA 1 - 7.0.1.2 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === CdRomPeripheral : IVI Virtual CD 0.5a iviVD Port 0 ID 0 DMA: Off DiskPeripheral : ST98823A atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 2 ID 0 DMA: On === CDRom-Device-Map === SONY DVD+-RW DW-D56A D: CDRom0 IVI Virtual CD E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2096360kB) Free physical memory: 1271MB (1302184kB) Memory in use : 37 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.12.2006 ISO compilation 5:49:13 PM #1 Text 0 File Isodoc.cpp, Line 6411 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 5:49:13 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 262144KB of Memory 5:49:13 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 5:49:13 PM #4 Text 0 File Writer.cpp, Line 113 Writer D: SONY DVD+-RW DW-D56A running 5:49:13 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 5:49:15 PM #6 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 5:49:16 PM #7 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2196351 (488:04.51, 4289MB) 5:49:16 PM #8 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 5:49:16 PM #9 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: SONY DVD+-RW DW-D56A, Media type: DVD-R Disc Manufacturer: TTG02 - Disc Application Code: 64, Disc Physical Code: 193 5:49:16 PM #10 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:49:16 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2196352 (2196352) = #2196352/488:4.52 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2196352 blocks [D: SONY DVD+-RW DW-D56A] -------------------------------------------------------------- 5:49:16 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: SONY DVD+-RW DW-D56A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4498128896, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2196352 | lead-out | 1 | 0x41 | 0x00 5:49:16 PM #13 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 5:49:16 PM #14 Phase 24 File dlgbrnst.cpp, Line 1725 Caching of files started 5:49:16 PM #15 Text 0 File Burncd.cpp, Line 4132 Cache writing successful. 5:49:16 PM #16 Phase 25 File dlgbrnst.cpp, Line 1725 Caching of files completed 5:49:16 PM #17 Phase 36 File dlgbrnst.cpp, Line 1725 Burn process started at 8x (11,080 KB/s) 5:49:16 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:49:16 PM #19 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode 5:49:16 PM #20 Text 0 File MMC.cpp, Line 21611 Set BUFE: Power-Burn -> ON 5:49:16 PM #21 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 5:49:16 PM #22 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 5:49:58 PM #23 Text 0 File Cdrdrv.cpp, Line 1197 17:49:58.904 - D: SONY DVD+-RW DW-D56A : Queue again later 5:56:49 PM #24 SPTI -1046 File SCSIPassThrough.cpp, Line 323 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 00 00 00 0A 20 00 00 20 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05 Buffer x03530000: Len x10000 0x5B 6F 27 9D D3 D0 03 86 5A 46 69 0B 61 9D 10 3A 0xF0 73 C7 60 49 DC 54 C2 E2 49 EC B8 D8 DB 97 B1 0x34 26 D4 26 06 D4 7E 5A 47 2E 4D 62 43 3C 17 33 5:56:49 PM #25 CDR -1046 File Writer.cpp, Line 302 Illegal disc D: SONY DVD+-RW DW-D56A 5:56:49 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 5:56:49 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 5:56:49 PM #28 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was 2591 5:56:49 PM #29 Phase 38 File dlgbrnst.cpp, Line 1725 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 1/19/2006 11:05:36 AM (Prassi/Veritas driver for win 2K) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/12/2004 1:27:56 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi TTDaddy First thing let's edit out the serial # - top of log and begins w/ 5C. What other discs have you tried besides the TDK's? Firmware is current but this drive had an update since mid 2005. Laptop burners can be a bit picky so try taking the burn speed down to 4x and see if that helps. Nero can use an update the latest is 7.5.0.9a. Anything change pc wise since you were last able to burn dvd's?
