illegal disc problem with burning DVD

Discussion in 'Nero discussion' started by abdgismo, Oct 10, 2006.

Thread Status:
Not open for further replies.
  1. abdgismo

    abdgismo Member

    Joined:
    Oct 10, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Hello guys

    I have some problems when I burn memorex DVD with nero. It says illegal disc and could not perform start of Disc-at-once.

    Thx alot for your helps.

    There is log file.
    -------------------

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 302MB (309612kB)
    Memory in use : 40 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    13:43:45 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    13:43:45 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    13:43:45 #3 Text 0 File Writer.cpp, Line 122
    Writer _NEC DVD_RW ND-2510A running

    13:43:46 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    13:43:46 #5 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    13:43:46 #6 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2143823 (476:24.23, 4187MB)

    13:43:46 #7 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    13:43:46 #8 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: RITEKG - 05
    Disc Application Code: 64, Disc Physical Code: 193

    13:43:46 #9 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    13:43:46 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2143824 (2143824) = #2143824/476:24.24
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2143824 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    13:43:48 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4390551552, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2143824 | lead-out | 1 | 0x00 | 0x41

    13:43:49 #12 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    13:43:49 #13 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    13:43:49 #14 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    13:43:49 #15 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 4x (5.540 KB/s)

    13:43:49 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    13:43:50 #17 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 13:18,906 (798906ms) -> OK

    13:43:50 #18 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    13:43:50 #19 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    13:43:50 #20 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    13:43:50 #21 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    13:43:50 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    13:43:50 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    13:43:50 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    13:43:53 #25 Text 0 File Cdrdrv.cpp, Line 1284
    13:43:53.495 - _NEC DVD_RW ND-2510A\H2 T0 : Queue again later

    14:58:55 #26 Text 0 File WriterStatus.cpp, Line 116
    <_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 2143824 (20B650h), lenght 0 blocks

    14:58:55 #27 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    14:58:55 #28 Text 0 File DVDR.cpp, Line 2410
    EndDAO: Last written address was 2143823

    14:59:12 #29 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    14:59:12 #30 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    14:59:12 #31 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    14:59:13 #32 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    14:59:13 #33 Phase 37 File dlgbrnst.cpp, Line 1853
    Burn process completed successfully at 4x (5.540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 329MB (336896kB)
    Memory in use : 35 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    15:02:12 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:02:12 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:02:12 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    15:02:12 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    15:02:13 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    15:02:13 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    15:02:13 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    15:02:13 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:02:13 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    15:02:15 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    15:02:15 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    15:02:16 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    15:02:16 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    15:02:16 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 2.4x (3.324 KB/s)

    15:02:16 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:02:16 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 16:44,634 (1004634ms) -> OK

    15:02:16 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    15:02:16 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    15:02:16 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:02:16 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    15:02:16 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:02:16 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:02:16 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:02:16 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    15:02:16 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    15:02:16 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    15:02:16 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    15:02:16 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 2.4x (3.324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 300MB (307336kB)
    Memory in use : 41 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    15:12:42 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:12:42 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:12:42 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    15:12:42 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    15:12:43 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    15:12:43 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    15:12:43 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    15:12:43 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:12:43 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    15:12:44 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    15:12:45 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    15:12:45 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    15:12:45 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    15:12:45 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 2.4x (3.324 KB/s)

    15:12:45 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:12:45 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 16:44,634 (1004634ms) -> OK

    15:12:45 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    15:12:45 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    15:12:45 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:12:45 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    15:12:45 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:12:45 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:12:45 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:12:45 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    15:12:45 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    15:12:45 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    15:12:45 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    15:12:45 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 2.4x (3.324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 298MB (305500kB)
    Memory in use : 41 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    15:13:40 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:13:40 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:13:40 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    15:13:40 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    15:13:41 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    15:13:41 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    15:13:41 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    15:13:41 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:13:41 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    15:13:42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    15:13:42 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    15:13:42 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    15:13:42 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    15:13:42 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 1x (1.385 KB/s)

    15:13:43 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:13:43 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 40:04,122 (2404122ms) -> OK

    15:13:43 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    15:13:43 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    15:13:43 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:13:43 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    15:13:43 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:13:43 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:13:43 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:13:43 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    15:13:43 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    15:13:43 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    15:13:43 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    15:13:43 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 1x (1.385 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 274MB (281520kB)
    Memory in use : 46 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    15:27:15 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:27:15 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:27:15 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    15:27:15 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    15:27:16 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    15:27:16 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    15:27:16 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    15:27:16 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:27:16 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    15:27:17 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    15:27:18 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    15:27:18 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    15:27:18 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    15:27:18 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 2.4x (3.324 KB/s)

    15:27:18 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:27:18 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 16:44,634 (1004634ms) -> OK

    15:27:18 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    15:27:18 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    15:27:18 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:27:18 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    15:27:18 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:27:18 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:27:18 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:27:18 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    15:27:18 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    15:27:18 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    15:27:18 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    15:27:18 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 2.4x (3.324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 266MB (273084kB)
    Memory in use : 47 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    15:30:15 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:30:15 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:30:15 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    15:30:15 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    15:30:16 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    15:30:16 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    15:30:16 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    15:30:16 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:30:16 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    15:30:18 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    15:30:18 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    15:30:18 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    15:30:18 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    15:30:18 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 2.4x (3.324 KB/s)

    15:30:18 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:30:19 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 16:44,634 (1004634ms) -> OK

    15:30:19 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    15:30:19 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    15:30:19 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:30:19 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    15:30:19 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:30:19 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:30:19 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:30:19 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    15:30:19 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    15:30:19 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    15:30:19 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    15:30:19 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 2.4x (3.324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 242MB (248120kB)
    Memory in use : 52 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    15:42:07 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:42:07 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:42:07 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    15:42:07 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    15:42:08 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    15:42:08 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    15:42:08 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    15:42:08 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:42:08 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    15:42:11 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    15:42:12 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    15:42:12 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    15:42:12 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    15:42:12 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 2.4x (3.324 KB/s)

    15:42:12 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:42:12 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 16:44,634 (1004634ms) -> OK

    15:42:12 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode for Multisession

    15:42:12 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    15:42:12 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:42:12 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    15:42:12 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:42:12 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:42:12 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:42:12 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    15:42:12 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    15:42:12 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    15:42:12 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    15:42:12 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 2.4x (3.324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 269MB (275568kB)
    Memory in use : 47 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    15:43:18 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:43:18 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:43:18 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    15:43:18 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    15:43:18 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    15:43:18 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    15:43:18 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    15:43:18 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:43:18 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    15:43:30 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    15:43:30 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    15:43:30 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    15:43:30 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    15:43:30 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 1x (1.385 KB/s)

    15:43:30 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:43:30 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 40:04,122 (2404122ms) -> OK

    15:43:30 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode for Multisession

    15:43:30 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    15:43:30 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:43:30 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    15:43:30 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:43:30 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:43:30 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:43:30 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    15:43:30 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    15:43:30 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    15:43:30 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    15:43:30 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 1x (1.385 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 252MB (258088kB)
    Memory in use : 50 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    15:49:16 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    15:49:16 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    15:49:16 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    15:49:16 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    15:49:16 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    15:49:16 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    15:49:16 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    15:49:16 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:49:16 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    15:49:18 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    15:49:18 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    15:49:18 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    15:49:18 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    15:49:18 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 2.4x (3.324 KB/s)

    15:49:18 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    15:49:18 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 16:44,634 (1004634ms) -> OK

    15:49:19 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    15:49:19 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    15:49:19 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:49:19 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    15:49:19 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:49:19 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:49:19 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    15:49:19 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    15:49:19 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    15:49:19 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    15:49:19 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    15:49:19 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 2.4x (3.324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    .
    .
    1A23-0009-0030-2315-8317-2811

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <IdeChnDr> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8520 D: CDRom0
    HL-DT-ST CD-RW GCE-8160B E: CDRom1
    _NEC DVD_RW ND-2510A F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523744kB)
    Free physical memory: 217MB (222784kB)
    Memory in use : 57 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.10.2006
    ISO compilation
    16:11:59 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    16:11:59 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    16:11:59 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    16:11:59 #4 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media

    16:12:00 #5 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1606095 (356:54.45, 3136MB)

    16:12:00 #6 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    16:12:00 #7 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    16:12:00 #8 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    16:12:00 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    16:12:01 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1606096 | lead-out | 1 | 0x00 | 0x41

    16:12:01 #11 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    16:12:01 #12 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    16:12:01 #13 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    16:12:01 #14 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 2.4x (3.324 KB/s)

    16:12:01 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    16:12:01 #16 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 16:44,634 (1004634ms) -> OK

    16:12:01 #17 Text 0 File DVDR.cpp, Line 2027
    Recording mode: Sequential Recording Mode

    16:12:02 #18 Text 0 File Mmc.cpp, Line 20673
    Set BUFE: Buffer underrun protection -> ON

    16:12:02 #19 Text 0 File DVDR.cpp, Line 2168
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    16:12:02 #20 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    16:12:02 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    16:12:02 #22 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    16:12:02 #23 Text 0 File DVDR.cpp, Line 5656
    Book Type counter: 500, Book Type selected in EEPROM, command version 1

    16:12:02 #24 Text 0 File DVDR.cpp, Line 4877
    Drive: _NEC DVD_RW ND-2510A
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    16:12:02 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
    Illegal disc

    16:12:02 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
    Could not perform start of Disc-at-once

    16:12:02 #27 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    16:12:02 #28 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 2.4x (3.324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
     
    abdgismo, Oct 10, 2006
    #1
  2. arniebear

    arniebear Active member

    Joined:
    Jan 2, 2005
    Messages:
    7,191
    Likes Received:
    0
    Trophy Points:
    96
    arniebear, Oct 10, 2006
    #2
  3. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,186
    Likes Received:
    144
    Trophy Points:
    143
    closed due to multi-posting
     
    ddp, Oct 10, 2006
    #3
Thread Status:
Not open for further replies.

Share This Page