I have the smae problem like some of the guys here : Krasi 1A23-0058-4010-2386-2165-3416 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16.12.2003 г. 20:18:06 Nero version: 6.3.1.17 (Nero Express) Recorder: <SONY DVD RW DW-Q120A> Version: PYS3 - HA 0 TA 1 - 6.3.1.17 Adapter driver: <nvatabus> HA 0 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <SONY DVD RW DW-Q120A >Version: PYS3 - HA 0 TA 1 - 6.3.1.17 Adapter driver: <nvatabus> HA 0 === Scsi-Device-Map === DiskPeripheral : ExcelStor Technology J8160 nvatabus Port 0 ID 0 DMA: Off CdRomPeripheral : SONY DVD RW DW-Q120A nvatabus Port 0 ID 1 DMA: Off === CDRom-Device-Map === SONY DVD RW DW-Q120A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 65MB (67280kB) Memory in use : 87 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.4.2007 ISO compilation 17:06:32 #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 17:06:32 #2 Text 0 File Reader.cpp, Line 118 Reader running 17:06:32 #3 Text 0 File Writer.cpp, Line 124 Writer SONY DVD RW DW-Q120A running 17:06:32 #4 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 17:06:34 #5 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 17:06:34 #6 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1931807 (429:17.32, 3773MB) 17:06:34 #7 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 17:06:34 #8 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: SONY DVD RW DW-Q120A, Media type: DVD-R Disc Manufacturer: Plasmo - n1A Disc Application Code: 64, Disc Physical Code: 193 17:06:34 #9 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= 17:06:34 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 1931808 (1931808) = #1931808/429:17.33 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1931808 blocks [SONY DVD RW DW-Q120A ] -------------------------------------------------------------- 17:07:19 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [SONY DVD RW DW-Q120A ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3956342784, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1931808 | lead-out | 1 | 0x00 | 0x41 17:07:20 #12 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 17:07:20 #13 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 17:07:20 #14 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 17:07:20 #15 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 4x (5 540 KB/s) 17:07:20 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 17:07:21 #17 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 12:02,366 (722366ms) -> OK 17:07:21 #18 Text 0 File DVDR.cpp, Line 1879 Recording mode: Sequential Recording Mode for Multisession 17:07:21 #19 Text 0 File Mmc.cpp, Line 20401 Set BUFE: Power-Burn -> ON , Generic write control : ON 17:07:21 #20 Text 0 File DVDR.cpp, Line 2020 Start write address at LBA 0 DVD high compatibility mode: Yes 17:07:21 #21 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 17:07:22 #22 SCSI -1046 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x02FD0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 17:07:22 #23 CDR -1046 File Writer.cpp, Line 304 Illegal disc 17:07:22 #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 17:07:22 #25 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 17:07:23 #26 Text 0 File DVDR.cpp, Line 2256 EndDAO: Last written address was -1 17:07:23 #27 Phase 133 File dlgbrnst.cpp, Line 1845 Writing short lead-out 17:07:23 #28 SCSI -1046 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 17:07:28 #29 SCSI -1066 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 17:07:28 #30 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 17:07:28 #31 CDR -1046 File WriterStatus.cpp, Line 164 Illegal disc SONY DVD RW DW-Q120A\H0 T1 17:07:28 #32 TRANSFER -24 File WriterStatus.cpp, Line 164 Could not perform end of Disc-at-once 17:07:28 #33 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 17:07:28 #34 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 4x (5 540 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 25.8.2006 г. 06:47:00 File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 26.10.2005 г. 23:12:48 (Prassi/Veritas driver for win 2K) File 'Drivers\nvatabus.sys': Ver=5.10.2600.0446 built by: WinDDK, size=79360 bytes, created 03.6.2004 г. 05:40:46 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hello. Please edit your post and remove the Nero program serial number before the pirates have at it. I think this is very poor quaity media you're using. Stick to Verbatim, Taiyo Yuden, and Made in Japan labeled Fuji and Sony for the best results. The Roxio CDRAL driver is installed which has been known to cause problems with some systems. In this case, it's likely the media causing the problem. You don't have much of a memory cushion. Shutdown any unnecessary programs when burning.
first edit out your serial #.... use the edit icon found in the right hand corner of your reply on this page that looks like this: your serial # is on the top starting with 1A23.... take it out! your version of Nero 6 is not the stablest version.... 6.6.0.18 is the most stablest version of Nero 6 and I would update it to that version. Here's how: Before udating to 6.6.0.18 I would save the serial #, uninstall Nero, then use the cleaning tools : http://ww2.nero.com/nero6/eng/Clean_Tools.html then do a registry clean up(free registry cleaner, CClean: http://www.ccleaner.com/download/downloadpage.aspx?1) and defrag...... then reboot! install package one: http://www.filehippo.com/download_nero_burning_rom/?539 then install package two: http://www.nero.com/nero6/eng/Patch_for_NVE3.html reboot and you're good to go! Turn on your DMA.. otherwise you're doomed for failure. Here's how: http://my.afterdawn.com/alkohol/blog_entry.cfm/231/dmaissues you are using too much memory..... 512K is the minimum amount of memory and you're using too much of it for Nero to be sucessful. Shut off all unnecessary programs that are running in the background, no internet while burning, no multi tasking while burning and it should be ok if you follow this this is crappy media! Use the good stuff and you won't have problems like this! Look on the label of the box or spindle and make sure it says MIJ (Made In Japan)! Taiyo Yuden, Sony, Maxell, Fuji.... MIJ! Using MIJs could solve many problem that come with crappy media! That's why you're getting: Illegal disc and this: Burn process failed at 4x (5 540 KB/s) this is a Roxio/Sonic driver and if you are having problems with Nero then get rid of this because this drive is known to make problems for Nero! uninstall Roxio/Sonic and then use the Roxio Zapper to make sure there are no traces of Roxio/Sonic, found here: http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml after following all these suggestions you will find that Nero will work! good luck. and welcome to AfterDawn!
