SOMEONE HELP PLEASE!!!!!I've had nero 7 for a while now. About a month ago I sent me pc to be cleaned and when I got it back I put the nero 7 back in and I can no longer burn ANYTHING. It does go through the whole burning to disc process but when it's all done I get a burn process failed error. Can anyone help me fix this or tell me an eaiser program to ues....I like nero 7 because you can burn cue/bin files without having to convert it.
@roropick Welcome to ad! To try and help sort this out for you your best bet is to post your last Nero log. They can be found at: Nero7: program files>Nero>Nero 7>Core>NeroHistory.txt Just be sure to edit out your serial # - they usually begin w/ 1A,1C or 5C. The logs are usually separated by something like this: ====***NeroAPI Burning History***==== Just copy and paste what's between these.
Binkie; I uninstalled the nero 7 and the log is not there; there is no longer nero folders in my pc...should I reinstall nero again??
If you still want to use it - I would. Run the clean tool 1st: http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html Then install the latest version. (there's a link within the link above). Nero may or may be the problem. Try burning again let us know how it goes! If it fails than post the log and we'll go from there. edit: fix link
I hope this is what you needed, sorry it took so long to ans you.... Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.1.2 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 0, 1, 2 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 1 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400JB-00ENA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : AOPEN CD-RW CRW4850 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 1 DMA: On CdRomPeripheral : JC2445O AOR343O 2.0B vaxscsi Port 2 ID 0 DMA: Off
What I can see from this is your burner firmware needs updating, from this link http://lgodd.lge.com/fwdrv/DVD-WRITER/GSA4163A106.exe The log you have posted is only less than half... much more is required, it normally ends like this. [bold] Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 30/06/2005 08:47:33 AM (Prassi/Veritas driver for win 2K) File 'Drivers\scsiport.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=90240 bytes, created 29/08/2002 02:00:00 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) [/bold]
sorry about that... Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.1.2 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 0, 1, 2 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 1 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400JB-00ENA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : AOPEN CD-RW CRW4850 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 1 DMA: On CdRomPeripheral : JC2445O AOR343O 2.0B vaxscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === AOPEN CD-RW CRW4850 D: CDRom0 HL-DT-ST DVDRAM GSA-4163B E: CDRom1 JC2445O AOR343O F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261616kB) Free physical memory: 86MB (88248kB) Memory in use : 66 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.5.2006 NeroAPI 2:13:42 AM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 2:13:43 AM #2 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 39936KB of Memory 2:13:43 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 2:13:43 AM #4 Text 0 File Writer.cpp, Line 113 Writer E: HL-DT-ST DVDRAM GSA-4163B running 2:13:43 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 2:13:43 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 2:13:43 AM #7 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 2:13:44 AM #8 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1724719 (383:16.19, 3368MB) 2:13:44 AM #9 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 2:13:44 AM #10 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2 Disc Application Code: 0, Extended Information Indicators: 3 2:13:44 AM #11 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:13:44 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1724720 (1724720) = #1724720/383:16.20 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1724720 blocks [E: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 2:13:44 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3532226560, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1724720 | lead-out | 1 | 0x41 | 0x00 2:13:44 AM #14 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 2:13:44 AM #15 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 2:13:44 AM #16 Text 0 File Burncd.cpp, Line 4132 Cache writing successful. 2:13:44 AM #17 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 2:13:44 AM #18 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 2:13:44 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:13:45 AM #20 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: RITEK... Media type ID: R03 Product revision number: 2 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8 23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l.²g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 2:13:45 AM #21 Text 0 File DVDR.cpp, Line 5400 Drive: HL-DT-ST DVDRAM GSA-4163B Book Type request [LG]: DVD-ROM Changing the Book Type was finished successfully, return code 0 2:13:45 AM #22 CDR -1207 File DVDR.cpp, Line 5330 Book Type automatically set to: DVD-ROM 2:13:45 AM #23 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 2:19:56 AM #24 Text 0 File WriterStatus.cpp, Line 116 <E: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1724720 (1A5130h), length 0 blocks 2:19:56 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:20:02 AM #26 SPTI -1194 File SCSIPassThrough.cpp, Line 323 E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1194) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x04 CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 10 35 20 00 0E 73 04 2:20:02 AM #27 CDR -1194 File ThreadedTransferInterface.cpp, Line 1937 PMA update failure E: HL-DT-ST DVDRAM GSA-4163B 2:20:02 AM #28 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937 Could not perform end of Disc-at-once 2:20:02 AM #29 SPTI -1176 File SCSIPassThrough.cpp, Line 323 E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x71 00 05 00 00 00 00 10 35 35 31 0E 72 03 2:20:02 AM #30 Phase 127 File APIProgress.cpp, Line 278 Generating DVD high compatibility borders 2:20:02 AM #31 CDR -1176 File WriterStatus.cpp, Line 167 Session fixation error E: HL-DT-ST DVDRAM GSA-4163B 2:20:03 AM #32 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 2:20:03 AM #33 Phase 38 File APIProgress.cpp, Line 278 Burn process failed at 8x (11,080 KB/s) Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ======
First of all check out what I said above re firmware It is recommended to have a minimum of 512meg RAM to burn successfully I would recommend adding another 256meg, in the meantime dont multitask while burning These discs are good quality. Try slowing your burn to 4X I would also recommend updating your Nero to 7.0.8.2 from here ftp://ftp5.us.nero.com/software/nero7/Nero-7.0.8.2_eng_no_yt.exe Try these changes and see how you go, good luck.
I updated everything and it still won't work!!!! is there another program that I can use to burn DVD's that would be just as easy as nero?? Thanks for your help
@roropick My next suggestion would be to try different media. Ritek is decent and even though your drive recognizes them the errors in your log say it doesn't like them. Try Verbatim or made in Japan Fuji, Sony or Maxell. Did you try a lower burn speed? You can also post the last log if you like. You can try DVD Decrypter to burn DVD's.(only burns iso's though). For your dvd backup's are you also using shrink by chance?
No I'm not using shrink and I "THOUGHT" I changed the speed but I'm not sure if I am doing it right or not. Here is my last log.... Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.8.2 Using interface version: 7.0.0.0 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 0, 8, 2 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 1 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400JB-00ENA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : AOPEN CD-RW CRW4850 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 1 DMA: On CdRomPeripheral : JC2445O AOR343O 2.0B vaxscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === AOPEN CD-RW CRW4850 D: CDRom0 HL-DT-ST DVDRAM GSA-4163B E: CDRom1 JC2445O AOR343O F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte BUFE : 0 Physical memory : 255MB (261616kB) Free physical memory: 101MB (104308kB) Memory in use : 60 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.5.2006 NeroAPI 3:26:35 PM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 3:26:36 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 39936KB of Memory 3:26:36 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 3:26:36 PM #4 Text 0 File Writer.cpp, Line 113 Writer E: HL-DT-ST DVDRAM GSA-4163B running 3:26:36 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:26:36 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:26:36 PM #7 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 3:26:37 PM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1724751 (383:16.51, 3368MB) 3:26:37 PM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 3:26:37 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2 Disc Application Code: 0, Extended Information Indicators: 3 3:26:37 PM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:26:37 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1724752 (1724752) = #1724752/383:16.52 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1724752 blocks [E: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 3:26:37 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3532292096, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1724752 | lead-out | 1 | 0x41 | 0x00 3:26:37 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:26:37 PM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 3:26:37 PM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 3:26:37 PM #17 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 3:26:37 PM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 3:26:37 PM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 8x (11,080 KB/s) 3:26:37 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:26:37 PM #21 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: RITEK... Media type ID: R03 Product revision number: 2 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8 23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l.²g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 3:26:37 PM #22 Text 0 File DVDR.cpp, Line 5719 Drive: HL-DT-ST DVDRAM GSA-4163B Book Type request [LG]: DVD-ROM Changing the Book Type was finished successfully, return code 0 3:26:37 PM #23 CDR -1207 File DVDR.cpp, Line 5649 Book Type automatically set to: DVD-ROM 3:26:37 PM #24 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 3:32:45 PM #25 Text 0 File WriterStatus.cpp, Line 116 <E: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1724752 (1A5150h), length 0 blocks 3:32:45 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:32:56 PM #27 SPTI -1194 File SCSIPassThrough.cpp, Line 290 E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1194) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x04 CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 10 35 20 00 0E 73 04 3:33:00 PM #28 CDR -1194 File ThreadedTransferInterface.cpp, Line 1937 PMA update failure E: HL-DT-ST DVDRAM GSA-4163B 3:33:00 PM #29 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937 Could not perform end of Disc-at-once 3:33:09 PM #30 SPTI -1093 File SCSIPassThrough.cpp, Line 290 E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1093) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 10 30 10 00 0E 02 3:33:09 PM #31 Phase 127 File APIProgress.cpp, Line 278 Generating DVD high compatibility borders 3:33:09 PM #32 CDR -1093 File WriterStatus.cpp, Line 167 No seek complete E: HL-DT-ST DVDRAM GSA-4163B 3:33:09 PM #33 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 3:33:09 PM #34 Phase 38 File APIProgress.cpp, Line 278 Burn process failed at 8x (11,080 KB/s) Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== Sorry for bugging you all so much
Nah your not bugging us! That's what the forum is here for to try and get your burning again! Okay we have a new error thrown in this log - No seek complete But they all kinda point to the same things. So even though your drive fully recognizes the Ritek - still try the firmware update. This log doesn't show that it was updated to A106 - you still have A103. Then try the 4x speed - the last screen in Nero will give you your burn options - set it to 4x. You also may want to try a lens cleaner on the drive - no seek error can be due to a dirty lens sometimes. If all that fails switch the brand of discs's to the ones in my above post. If you need any help with any of the updates or option in Nero just post back. Keep us posted! editted to add- even though you put the pc in the shop to be cleaned you may want to check your drive's connections and make sure they are secure.
binkie7..Hello again..Do U know if their is a conflict with Force or Adaptec ASPI & Patin Coufin..I'm still having problems burning.NOW WITH BOTH Copy to DVD & Nero..
Hey rick5446 Not like this helps but I remember something and now can't find it. Of course I can't remember what it said I don't think there's a conflict. But you may have a conflict somewhere. You can always post your log again. Or go back to the point where burning was a non issue and check what's been added since then to rule out the drive or conflicts.
Pretty sure if you check firmware release notes for 105 or 106 for your LG burner you will see it takes care of compatibility problems with Ritek brand. Just went through this experience myself. Do as Gwendolin suggests and it should fix your problem. Caper
OK Binkie I'm at the end of the nero where you change speeds and I don't have 4x I just have 2x(3224kb/),2x(2770kb/),1x(1385 kb/) and of course max. So which one do I use.
I'm assuming that I am, lol I'm not that computer smart...even tho I put the burner in myself. om so I'm guessing that the 2x(3324kb) is the 2.4 am I right or am I wrong?
Yep that would be 2.4x. Usually if your using 1 drive to read and write from Nero will only list the supported speeds of the source disc and max so that may be way you aren't getting the other options.
It's me again Binkie.....ok this is where it stands, My nero is no good it will not burn anything anymore so I took it out, I tried using dvd santa that burned 1 dvd and now it won't burn anymore and I had to use the 4x for it to work. I've only had my burner for less than a year, would it be better if I returned it to where I bought it and get a new one? or is there something else I can do?